Inhaltszusammenfassung zur Seite Nr. 1
P-660RU-T v2 Quick Start Guide
P-660RU-T v2
ADSL2+ Ethernet / USB Router
Quick Start Guide
Version 3.40
Edition 1
11/2006
0
Inhaltszusammenfassung zur Seite Nr. 2
P-660RU-T v2 Quick Start Guide Overview The P-660RU-T v2 ADSL2+ Ethernet / USB router is the ideal device for small networks or individual computers connecting to the Internet via ADSL. Featuring USB and Ethernet ports, computers can share local resources (such as printers and files) and access to the Internet - simultaneously. This Quick Start Guide shows you how to: 1 Connect the hardware 2 Set up Internet access See your User’s Guide for background information on all features. 1 Connect
Inhaltszusammenfassung zur Seite Nr. 3
P-660RU-T v2 Quick Start Guide Option A: Connect via Ethernet 1ETHERNET: Use an Ethernet cable to connect a computer to the ETHERNET port for Internet access. 2DSL: Use a telephone wire to connect your P-660RU-T v2’s DSL port to a telephone jack (or to a splitter, if one is already installed). 3POWER: Use only the included power adaptor to connect the POWER socket to an appropriate power source. After you’ve made the connections, push in the power button to turn on the P-660RU-T v2. Look
Inhaltszusammenfassung zur Seite Nr. 4
P-660RU-T v2 Quick Start Guide •The POWER light blinks while performing system testing. It then turns steady on if the testing is successful. •The DSL light blinks then turns steady on, and blinks when there is traffic. •The ETHERNET light turns on if the ETHERNET port is properly connected, and blinks when there is traffic. If none of the LEDs are on, unplug the device and recheck your hardware connections. 3
Inhaltszusammenfassung zur Seite Nr. 5
P-660RU-T v2 Quick Start Guide Option B: Connect via USB Note: Do NOT connect the same computer to both the USB and ETHERNET ports on the P-660RU-T v2. 1USB: Connect the provided USB cable to the P-660RU-T v2’s USB port. 2DSL: Use a telephone wire to connect your P-660RU-T v2’s DSL port to a telephone jack (or to a splitter, if one is already installed). 3POWER: Use only the included power adaptor to connect the POWER socket to an appropriate power source. 4
Inhaltszusammenfassung zur Seite Nr. 6
P-660RU-T v2 Quick Start Guide After you’ve made the connections, push in the power button to turn on the P-660RU-T v2. Look at the lights on the front panel. •The POWER light blinks while performing system testing. It then turns steady on if the testing is successful. •The DSL light blinks then turns steady on, and blinks when there is traffic. •The USB light turns on if the USB port is properly connected, and blinks when there is traffic. If none of the LEDs are on, unplug the device
Inhaltszusammenfassung zur Seite Nr. 7
P-660RU-T v2 Quick Start Guide If the wizard screen does not display do one of the following: a) Disconnect the USB cable and reconnect it. b) Use the Windows Device Wizard to manually add the device. c) Restart your computer. 3 Insert the support CD into your computer CD-ROM drive and select Install the software automatically (Recommended) and click Next to continue. 4 Windows starts installing the USB driver. Windows 2000/XP: If a warning screen displays, click Yes or Continue Anyway
Inhaltszusammenfassung zur Seite Nr. 8
P-660RU-T v2 Quick Start Guide Configuration genie and Zero configuration are only able to configure the device automatically for Internet access if you are using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address from your ISP. If you are not using these Internet access settings, then use the Web Configurator Internet Access Wizard to manually configure the device. You will need your Internet access information such as user name and password, if provided
Inhaltszusammenfassung zur Seite Nr. 9
P-660RU-T v2 Quick Start Guide YOU ARE USING INFORMATION ENCAPSULATION MODE IP FROM ISP METHOD ADDRESS An IP address, ENET ENCAP Routing Static subnet mask and a gateway IP address A: Configuration Genie From the included CD, click Multimedia Auto Provisioner (the installation and configuration assistant) and then click Installation Tutorial. After you have viewed the tutorial, click Configuration Genie at the end of the installation tutorial or from Multimedia Auto Provisioner on the C
Inhaltszusammenfassung zur Seite Nr. 10
P-660RU-T v2 Quick Start Guide If you have a PPPoE or PPPoA connection, a screen displays prompting you to enter your Internet account information. Enter the username, password and/or service name exactly as provided. Click Log on to the Internet!. C: Web Configurator Internet Access Wizard Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen. If not given, leave the fields set to the default. 1 In your browser, go to http://192.168.1.1. 9
Inhaltszusammenfassung zur Seite Nr. 11
P-660RU-T v2 Quick Start Guide 2 Enter the default password 1234. If your browser cannot find this screen, see Troubleshooting on page 18. 3 It is strongly recommended that you change the default password in the next screen. If you change it, you will not see this screen the next time you log in. 10
Inhaltszusammenfassung zur Seite Nr. 12
P-660RU-T v2 Quick Start Guide 4 See the User’s Guide for field descriptions of the Site Map screen. In the navigation panel on the left of the screen, click Wizard Setup. You will need information supplied by your Internet service provider (ISP). 5 Configure Internet access settings in this step. The wizard screens vary depending on the Mode and Encapsulation you choose in the first wizard screen. Enter the Internet access information supplied by your ISP exactly in each wizard screen. I
Inhaltszusammenfassung zur Seite Nr. 13
P-660RU-T v2 Quick Start Guide B) Click Next. A B C D E F G C) Enter the username and password given by your ISP. D) If your ISP gave you an IP address, select Static IP Address and enter it. Otherwise, select Obtain an IP Address Automatically. E) Select Nailed-Up Connection to have your connection up all the time. Otherwise, select Connect on Demand 12
Inhaltszusammenfassung zur Seite Nr. 14
P-660RU-T v2 Quick Start Guide and specify an idle time-out period (in seconds) in the Max. Idle Timeout field. F) If you selected Routing, select SUA Only when you have one public IP address, Full Feature when you have more than one public IP address (for translation) or None to disable NAT. G) Click Next. RFC 1483 A) Select Routing if your ISP gave you an IP address and allows multiple computers to share an Internet account. Otherwise, select Bridge. Then select RFC 1483. 13
Inhaltszusammenfassung zur Seite Nr. 15
P-660RU-T v2 Quick Start Guide B) Click Next. A B C D E C) If you selected Routing, enter the IP address given by your ISP. D) If you selected Routing, select SUA Only when you have one public IP address, Full Feature when you have more than one public IP address (for translation) or None to disable NAT. E) Click Next. ENET ENCAP A) Select Routing, then ENET ENCAP. 14
Inhaltszusammenfassung zur Seite Nr. 16
P-660RU-T v2 Quick Start Guide B) Click Next. A B C D E C) If your ISP gave you an IP address, subnet mask and gateway address, select Static IP Address and enter them. Otherwise, select Obtain an IP Address Automatically. D) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT. E) Click Next. 15
Inhaltszusammenfassung zur Seite Nr. 17
P-660RU-T v2 Quick Start Guide PPPoE A) Select Routing, then PPPoE. B) Click Next. A B C D E F G C) Enter the service name, username and password supplied by your ISP. 16
Inhaltszusammenfassung zur Seite Nr. 18
P-660RU-T v2 Quick Start Guide D) If your ISP gave you an IP address, select Static IP Address and enter it. Otherwise, select Obtain an IP Address Automatically. E) Select Nailed-Up Connection to have your connection up all the time. Otherwise, select Connect on Demand and specify an idle time-out period (in seconds) in the Max. Idle Timeout field. F) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to d
Inhaltszusammenfassung zur Seite Nr. 19
P-660RU-T v2 Quick Start Guide 9 To test the connection from the P-660RU-T v2 to the ISP, click Start Diagnose. Otherwise click Return to Main Menu to go back to the main screen. Troubleshooting 1 If you cannot access the web configurator using Internet Explorer in Windows XP or Windows Server 2003, take the following steps. A) Check the cable connection from your computer to the P-660RU-T v2. B) Make sure you enter the password correctly (the field is case sensitive). If you have forgotte
Inhaltszusammenfassung zur Seite Nr. 20
P-660RU-T v2 Quick Start Guide C) Make sure your computer’s IP address is in the same subnet as the P-660RU-T v2’s IP address (see page 20). D) Ping the P-660RU-T v2 from a computer on the LAN. Make sure your computer’s Ethernet adapter is installed and functioning properly. In the computer, click Start, (All) Programs, Accessories and then Command Prompt. In the Command Prompt window, type "ping" followed by the P-660RU-T v2’s LAN IP address (192.168.1.1 is the default) and then press [
