Bedienungsanleitung Audiovox Platinum APS 686T

Inhaltszusammenfassung zur Seite Nr. 1

Model APS 686T
Owner’s Manual
4 Channel Remote
Car Starter
FEATURES :
! 2 Four Button Programmable RF Transmitters (1 with Flashlight)
! Four Channel Receiver (capable of accepting 4 transmitters)
! Code Hopping Technology
! Remote Start Safety Control Switch
! Safe Start RF Control (Double Push Of RF Transmitter)
! Selectable Automatic Timed Start Mode
! ( + ) and ( - ) Keyless Entry Outputs
! On-Board Start Relay
! On-Board Accessory Relay
! On-Board Ignition 1 Relay
! On-Board Ignition 2 Rela

Inhaltszusammenfassung zur Seite Nr. 2

YOUR “CODE HOPPING“ TRANSMITTERS The transmitters included with your new remote start system use the most advanced and secure form of radio frequency transmission available on any current automotive remote system. Some of today’s sophisticated auto thieves use a device known as a code grabber, which will receive and store the signal from your keychain transmitter, and re- transmit at a later time to unlock your system. Your code hopping transmitters will change their signal every time the button

Inhaltszusammenfassung zur Seite Nr. 3

To activate the optional accessory, press the option button on the keychain transmitter. The optional accessory will immediately engage. Note: If your system utilizes the transmitter shown, the second option button may be configured to operate additional accessories. Please consult your installing retailer for more information concerning the options available. SAFETY (Red Handle) CONTROL SWITCH The control switch allows you to temporarily disable the remote starting function of your system. To

Inhaltszusammenfassung zur Seite Nr. 4

CAUTION! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure oc- curs. DO NOT remote start the vehicle if the car is garaged. TO BEGIN THE AUTOMATIC START UP TIMER 1. Turn the ignition key on then off. 2. Within 10 seconds, activate the RF start command two times. (Push the second channel button of your keychain transmitter 4 times). The p