Inhaltszusammenfassung zur Seite Nr. 1
Contents
1. INSTRUCTIONS FOR PROPER USE ..................................................................................... 4
2. DISPOSAL INSTRUCTIONS – OUR ENVIRONMENT POLICY ............................................. 5
3. SAFETY PRECAUTION .......................................................................................................... 6
4. INTENDED USE OF THE APPLIANCE ................................................................................... 6
5. KNOW YOUR COOKER .....
Inhaltszusammenfassung zur Seite Nr. 2
Instructions for proper use 1. INSTRUCTIONS FOR PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE COOKER. ALSO KEEP THE SERIES OF NOZZLES SUPPLIED. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USES AND
Inhaltszusammenfassung zur Seite Nr. 3
Safety instruction 2. DISPOSAL INSTRUCTIONS – OUR ENVIRONMENT POLICY Our appliances are only packaged using non-pollutant, environment-friendly, recyclable materials. We urge you to cooperate by disposing of the packaging properly. Contact your local dealer or the competent local organisations for the addresses of collection, recycling and disposal facilities. Never leave all or part of the packaging lying around. Packaging parts, and especially plastic bags, may represent a suffocation hazard f
Inhaltszusammenfassung zur Seite Nr. 4
Safety instruction 3. SAFETY PRECAUTION ELECTRICAL CONNECTION: PLEASE REFER TO INSTALLATION INSTRUCTION FOR THE GAS & ELECTRICAL SAFETY REGULATIONS AND THE VENTILATION REQUIREMENTS. IN YOUR OWN INTEREST, AND THAT OF SAFETY, IT IS THE LAW THAT ALL GAS APPLIANCES BE INSTALLED AND SERVICE BY COMPETENT PERSONS, WHO WILL COMPLY WITH THE RELEVANT STANDARDS AND REGULATIONS. CORGI REGISTERED INSTALLERS UNDERTAKE TO WORK TO SATISFCTIORY STANDARDS. DISCONNECTION OF GAS AND ELECTRIC APPLIANCES SHOULD ALWAY
Inhaltszusammenfassung zur Seite Nr. 5
Instructions for the user 5. KNOW YOUR COOKER COOKING HOB CONTROL PANEL MAIN OVEN STORAGE COMPARTMENT 6. BEFORE FIRST USE Do not leave the packing in the home environment. separate the various waste materials and take them to the nearest special garbage collection centre. The inside of the appliance should be cleaned to remove all manufacturing residues. For further information about cleaning, see section "12. CLEANING AND MAINTENANCE" Using the oven and the grill for the first time, heat them
Inhaltszusammenfassung zur Seite Nr. 6
Instructions for the user 7. USE OF THE HOB 7.1 Lighting of the hob burners Before lighting the hob burners check that the flame caps are in the correct position and that their burner caps are in place, making sure that the holes A in the flame caps correspond to the spark plugs and thermocouples. The optional grid B is for use with “woks” (Chinese pans). To prevent deterioration of the hob we have equipped the cooker with a raised pan stand C to be placed underneath pans more than 26 cm in diam
Inhaltszusammenfassung zur Seite Nr. 7
Instructions for the user 8. FRONT CONTROL PANEL All the cooker controls and commands are on the front panel. ELECTRIC OVEN THERMOSTAT FRONT LEFT BURNER ELECTRIC OVEN FUNCTION KNOB REAR LEFT BURNER VARIABLE GRILL CENTRAL BURNER REAR RIGHT BURNER FRONT RIGHT BURNER If the cooker is equipped with an electronic programmer, before using the oven make sure that the symbol ; appears on the display. See paragraph “11. ELECTRONIC PROGRAMMER”. HOB BURNER COMMAND KNOB The flame is lit by pressing the kn
Inhaltszusammenfassung zur Seite Nr. 8
Instructions for the user MAIN OVEN CONTROL KNOB Each of the functions listed below can be used (except the oven light and the small grill) only together with the correct temperature thermostat regulation as described on page of this manual. OVEN LIGHT GRILL ELEMENT + VENTILATION UPPER AND LOWER HEATING ELEMENT LOWER HEATING ELEMENT + VENTILATION GRILL ELEMENT VENTILATED HEATING ELEMENT + VENTILATION VARIABLE GRILL INDICATOR LIGHT (RED) When this light comes on, the oven is heating up. When t
Inhaltszusammenfassung zur Seite Nr. 9
Instructions for the user 9. USE OF THE OVEN For the models with electronic programmer, before using the oven make sure that the display shows the symbol . 9.1 Warnings and general advice Using the oven and the grill for the first time, heat them to the maximum temperature (260°C) for as long as it takes to burn off any production oil residues which could give a nasty flavour to the food. After a power cut, the oven display will flash intermittently and show . To adjust refer to paragraph "11.
Inhaltszusammenfassung zur Seite Nr. 10
Instructions for the user 9.3.2 Using the rotisserie in cookers with maxi oven Fit the supporting frame onto the second runner up from the bottom so that the seat to take the rod projects outside the oven. Place the rod as shown in the diagram (1) and push the frame into the oven until the end of the rod reaches the hole in the rotisserie motor. Now push the rotisserie rod to the left until it reaches the position shown in the diagram (2). To activate this function, turn the knob to ( / ). The
Inhaltszusammenfassung zur Seite Nr. 11
Instructions for the user 10.AVAILABLE ACCESSORIES The oven has 4 support for positioning plates and racks at various heights. Oven grill: for cooking food on plates, small cakes, roasts or food requiring light grilling. Plate grill: for placing above plate for cooking foods that might drip. Oven plate: useful for catching fat from foods on the grill above. Pastry plate: for baking cakes, pizza and oven desserts. Roasting spit (certain models only): useful for cooking chicken, sausages and anyth
Inhaltszusammenfassung zur Seite Nr. 12
Instructions for the user 11.ELECTRONIC PROGRAMMER LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END OF COOKING KEY DECREASE TIME KEY INCREASE TIME KEY 11.1 Clock adjustment When using the oven for the first time, or after a power failure, the display flashes regularly and indicates . Press the keys and and at the same time the keys or : each single press changes the time by 1 minute either up or down. Before setting the programmer activate the desired function and temperature. 11.2
Inhaltszusammenfassung zur Seite Nr. 13
Instructions for the user 11.5 Minute Counter The programmer can also be used as a simple minute counter. By pressing key the display shows ; keep the key pressed and at the same time press keys or . On releasing the key programmed counting will begin and the display will show the current time and the symbol. After set-up, to see the remaining time, press the key . Use as a minute counter does not interrupt functioning of the oven at the end of the programmed time. 11.6 Adjusting alarm volum
Inhaltszusammenfassung zur Seite Nr. 14
Instructions for the user 12.CLEANING AND MAINTENANCE NEVER USE A STEAM JET TO CLEAN THE APPLIANCE. 12.1 Cleaning stainless steel To maintain stainless steel in good condition clean it regularly after each use, once it has cooled down. 12.2 Ordinary daily cleaning To clean and preserve the stainless steel surfaces, always use only specific products that do not contain abrasives or chlorine-based acids. How to use: pour the product on a damp cloth and wipe the surface, rinse thoroughly and dry wi
Inhaltszusammenfassung zur Seite Nr. 15
Instructions for the user 12.5 Cleaning of oven For best oven upkeep clean regularly after having allowed to cool. Take out all removable parts. � Clean the oven grill with hot water and non-abrasive detergent. Rinse and dry. � Do not allow residues of sugary foods (such as jam) to set inside the oven. If left to set for too long, they might damage the enamel lining of the oven. 12.6 Door glass The door glass should always be kept clean. Use absorbent kitchen paper to clean. In case of tough sp
Inhaltszusammenfassung zur Seite Nr. 16
Instructions for the user 13.EXTRAORDINARY MAINTENANCE The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations. Before any intervention, disconnect the power supply of the device. 13.1 Lubrication of the taps In time the taps may be difficult to turn or may be blocked. Clean them inside and replace the lubrication grease. This operation should be
Inhaltszusammenfassung zur Seite Nr. 17
Instructions for the user 13.5 Preventive maintenance This appliance does not need any special maintenance. However, a few simple operations have to be carried out periodically to prevent malfunctioning: Burners: the burners must be cleaned after every use to ensure correct combustion; make sure that all the openings and flame ports are clean and free of obstacles, and that the burners rest firmly on their supports. Gas connection: the gas connection must be checked periodically (at least every
Inhaltszusammenfassung zur Seite Nr. 18
Instructions for the installer 15.INSTALLATION OF THE APPLIANCE It is the law that all gas appliances are installed by authorised persons. Clearance around the cooker must comply with the requirements of AS5601. 15.1 Electrical connection Make sure that the power line voltage matches the specifications indicated on the rating plate located inside the storage compartment. This rating plate must never be removed. On the power line, install a two-pole cut-off device with contact cut-off distance gr
Inhaltszusammenfassung zur Seite Nr. 19
Instructions for the installer 15.2 Gas connection This appliance is suitable for installation with Natural Gas or LPG (propane). Refer to page 12 for the relevant burner pressure and appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator supplied must be fitted to the gas inlet. A test point (for checking the gas pressure) is supplied either with the regulator or as a separate fitting in the case of LPG (propane) appliances. Connection of th
Inhaltszusammenfassung zur Seite Nr. 20
Instructions for the installer 15.4 Clearance above and around domestic cookers Extract from AS5601 REQUIREMENTS 1 Overhead clearances – (Measurement A) Range hoods and exhaust fans shall be installed in accordance with the manufacturer’s instructions. However, in no case shall the clearance between the highest part of the hob of the cooking appliance and a range hood be less than 600 mm or, for an overhead exhaust fan, 750 mm. Any other downward facing combustible surface less than 600 mm above
