Inhaltszusammenfassung zur Seite Nr. 1
®
TM
JENN-AIR DUAL-FUEL PRO-STYLE
SLIDE-IN RANGE
USE & CARE
GUIDE
TABLE OF CONTENTS
Important Safety Instructions .....................................1-4
Care & Cleaning ..............................................................5-7
Maintenance.....................................................................8-9
Troubleshooting ......................................................... 10-11
Surface Cooking......................................................... 12-13
Oven Cooking.......
Inhaltszusammenfassung zur Seite Nr. 2
technician. Do not attempt to adjust, repair, service, Installer: Please leave this guide with this appliance. or replace any part of your appliance unless it is Consumer: Please read and keep this guide for future specifically recommended in this guide. All other reference. Keep sales receipt and/or cancelled check as servicing should be referred to a qualified servicer. proof of purchase. Always disconnect power to appliance before servicing. Model Number __________________________________ Ser
Inhaltszusammenfassung zur Seite Nr. 3
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS Do not touch a hot oven light bulb with a damp cloth as Always place oven racks in the desired positions while the bulb could break. Should the bulb break, disconnect oven is cool. Slide oven rack out to add or remove food, power to the appliance before removing bulb to avoid using dry, sturdy potholders. Always avoid reaching into electrical shock. the oven to add or remove food. If a rack must be moved while hot, use a dry potholder. Always turn the To prevent pot
Inhaltszusammenfassung zur Seite Nr. 5
To minimize burns, ignition of flammable materials and or cloth is used to wipe spills on a hot surface. Some spillage due to unintentional contact with the utensil, do cleaners can produce noxious fumes if applied to a hot not extend handles over adjacent surface burners. surface. Always turn pan handles toward the side or back of the Clean only parts listed in this guide. appliance, not out into the room where they are easily hit or reached by small children. Never let a pan boil dry as this c
Inhaltszusammenfassung zur Seite Nr. 6
CARE & CLEANING To set Self-Clean: Self-Clean Oven 1. Press Clean pad. CAUTION 2. REMOVE RACKS will be displayed. Remove the racks. 3. Select CONTINUE using the Quickset pad. The Quickset • It is normal for parts of the oven to become hot during a pads are located on either side of the control panel dsplay. self-clean cycle. 4. Set LIGHT soil level by entering 200 using the number • To prevent damage to oven door, do not attempt to open pads for two hours of cleaning time. Press the Enter pad.
Inhaltszusammenfassung zur Seite Nr. 7
After Self-Cleaning Notes: About one hour after the end of the clean cycle, the lock will disengage and OVEN COOLING will go off in the • If the oven door is left open, CLOSE DOOR will appear in display. At this point, the door can be opened. the display until the door is closed. Some soil may leave a light gray, powdery ash which can be • If more than 30 seconds elapse between pressing the removed with a damp cloth. If soil remains, it indicates that Clean pad and pressing a number pad, the pro
Inhaltszusammenfassung zur Seite Nr. 8
CARE & CLEANING PART PROCEDURE Control Knobs • Remove knobs in the OFF position by pulling forward. • Wash, rinse and dry. Do not use abrasive cleaning agents as they may scratch the finish. • Turn on each burner to be sure the knobs have been correctly replaced. Cooktop and Porcelain enamel is glass fused on metal and may crack or chip with misuse. It is acid-resistant, not acid- Control Panel - proof. All spillovers, especially acidic or sugary spillovers, should be wiped up im
Inhaltszusammenfassung zur Seite Nr. 9
MAINTENANCE Oven Door Leveling Legs CAUTION CAUTION Be sure the anti-tip bracket secures one of the rear NEVER place excessive weight on or stand on an open oven door. This could cause the range to tip over, break leveling legs to the floor. This bracket prevents the range the door, or injure the user. from accidentally tipping. • NEVER attempt to open or close door or operate oven until Be sure the range is leveled when installed. If door is properly replaced. the range is not level, turn the
Inhaltszusammenfassung zur Seite Nr. 10
MAINTENANCE Removal of Gas Appliance Gas appliance connectors used to connect this appliance to the gas supply are not designed for continuous movement. Once installed, DO NOT repeatedly move this gas appliance for cleaning or to relocate. If this appliance has to be moved and/or removed for servicing, follow the procedure described in the installation instructions. For information, contact Jenn- Air Customer Service at 1-800-JENNAIR (1-800-536-6247). To prevent range from accidentally tipping,
Inhaltszusammenfassung zur Seite Nr. 11
TROUBLESHOOTING PROBLEM SOLUTION For most concerns, try these first. • Check if oven controls have been properly set. • Check to be sure plug is securely inserted into receptacle. • Check or re-set circuit breaker. Check or replace fuse. • Check power supply. Part or all of appliance does not • Check if surface and/or oven controls have been properly set. See pgs. 12 & 16. work. • Check if oven door is unlocked after self-clean cycle. See pg. 6. • Check if oven is set for a delayed cook
Inhaltszusammenfassung zur Seite Nr. 12
PROBLEM SOLUTION Oven will not self-clean. • Check to make sure the cycle is not set for a delayed start. See pg. 5. • Check if door is closed. • Check if control is in Sabbath Mode. See pg. 28. • Oven may be over 400° F. Oven temperature must be below 400° F to program a clean cycle. Oven did not clean properly. • Longer cleaning time may be needed. • Excessive spillovers, especially sugary and/or acidic foods, were not removed prior to the self-clean cycle. Oven door will not unlock afte
Inhaltszusammenfassung zur Seite Nr. 13
SURFACE COOKING Surface Controls Suggested Heat Settings The size and type of cookware, type and amount of food and BTU of the burner will determine where CAUTION to set the knob for cooking operations. • If flame should go out during a cooking operation and Use the settings printed around the the burner does not reignite itself, turn the burner off. If a knobs as a guide. The following strong gas odor is detected, open a window and wait five descriptions will aid in choosing the minutes before
Inhaltszusammenfassung zur Seite Nr. 14
SURFACE COOKING Cooktop Burner Grates The grates must be properly positioned before cooking. To prevent the cooktop from discoloring When installing the grates, place the tab ends toward the or staining: center, matching the straight bars. • Clean cooktop after each use. Improper installation of the grates may result in chipping of the cooktop. • Wipe acidic or sugary spills as soon as the cooktop has cooled as these spills may discolor the porcelain. Unlike a range with standard gas burners, th
Inhaltszusammenfassung zur Seite Nr. 15
OVEN COOKING Control Panel A B C D E F G H I J K L M N O P The control panel is designed for ease in programming. The display window shows options for each function and moves from step to step through the programming process. Control panel features vary by model. Oven display above is programmed for a bake operation. If you need to back out of a function or option
Inhaltszusammenfassung zur Seite Nr. 16
OVEN COOKING Activating and canceling the clock/day 2. Press the displayed times on the Quickset pads repeatedly of week display: until the desired time is entered. 1. Press Setup pad. OR 2. Select CLOCK. 3. Press the number pads to enter the new desired time. 3. Press the arrow to scroll until DISABLE is displayed. 4. Press Enter pad. 4. Select DISABLE. Canceling the Timer: 5. Select TIME. 1. Press the TIMER 1 or TIMER 2 pad twice. 6. Select OFF to turn the clock display off, or select ON to tu
Inhaltszusammenfassung zur Seite Nr. 17
Inhaltszusammenfassung zur Seite Nr. 18
Inhaltszusammenfassung zur Seite Nr. 19
Inhaltszusammenfassung zur Seite Nr. 20
