Inhaltszusammenfassung zur Seite Nr. 1
Use & Care Guide
Dual Fuel Ranges
Dishwasher
E30DF74EPS E36DF76EPS E48DF76EPS
5995447074
Inhaltszusammenfassung zur Seite Nr. 2
Finding Information 2 PLEASE READ AND SAVE THIS GUIDE Thank you for choosing Electrolux, the new premium brand in home appliances. Attach your sales This Use & Care Guide is part of our commitment to customer satisfaction and receipt to this page for future product quality throughout the service life of your new range. reference. We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use this page to record key product information. IMPOR I
Inhaltszusammenfassung zur Seite Nr. 3
Finding Information 3 PRODUCT REGISTRATION CARD The package containing this manual also includes your product registration information. Warranty coverage begins at the time your Electrolux range was purchased. If you received a damaged product, immediately contact your dealer or builder. Do not install or use a damaged appliance. NO NO NO NO NOTE TE TE TE TE Registering your product with Electrolux enhances our ability to serve you. You can register online (at the Internet address below) or by d
Inhaltszusammenfassung zur Seite Nr. 4
4 Finding Information TABLE OF CONTENTS Finding Information ........................................... 2 Getting Started ................................................. 21 Please Read And Save This Guide ................... 2 Before Setting Oven Controls .......................... 21 Make A Record For Quick Reference ................ 2 Companion Oven ............................................ 23 Questions .......................................................... 3 Setting Oven Controls ...
Inhaltszusammenfassung zur Seite Nr. 5
Safety 5 IMPORTANT SAFETY INSTRUCTIONS Safety Precautions Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a Warning or Caution based on the risk type. Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING WARNING WARNING WARNING WARNING W
Inhaltszusammenfassung zur Seite Nr. 6
Safety 6 General Precautions IMPOR IMPOR IMPORTTTANT ANT ANT IMPOR IMPORTTANT ANT • Begin by ensuring proper installation and grounding of the appliance by a qualified technician according to the accompanying Installation Instructions. Have the installer show you where the fuse or junction box is located so that you know how and where to turn off power. Also, have the installer show you the location of the gas supply. If you smell gas, do not use the range. Immediately turn off the gas supply a
Inhaltszusammenfassung zur Seite Nr. 7
Safety 7 IMPOR IMPOR IMPORTTTANT ANT ANT IMPOR IMPORTTANT ANT Always light each burner prior to placing a utensil on the burner grate. Also, turn the control knob to the “off” position before removing a utensil from the burner grate. Always clean the cooktop cautiously. If using a damp sponge or cloth, wait until the cooktop has cooled sufficiently to prevent steam burns. Also, some cleaners can produce harmful or unpleasant fumes if applied to hot surfaces. Clean only those parts listed i
Inhaltszusammenfassung zur Seite Nr. 8
Safety 8 CA CA CAUTION UTION UTION CA CAUTION UTION Do not use the range for warming or heating the room. Do not leave children alone or unattended in the area where the range is in use. Never allow children to sit or stand on any part of the range. Do not let children play with the range. Do not store items of interest to children above the range. Children could be burned or injured while climbing on the appliance. Do not wear loose or hanging apparel while using the range. Do not sto
Inhaltszusammenfassung zur Seite Nr. 9
Safety 9 LIQUIFIED PETROLEUM (PROPANE) GAS CONVERSION This appliance can be used with Natural Gas and Propane Gas. It is shipped from the factory for use with natural gas. A kit for converting to LP gas is supplied with your range. The kit is marked “FOR LP/PROPANE GAS CONVERSION”. Follow the installation instructions which are inside the envelope. The conversion must be performed by a qualified service technician in accordance with the kit instructions and all local codes and requirements. Fail
Inhaltszusammenfassung zur Seite Nr. 10
Feature Overview 10 Before using your range, become familiar with the features and control panel layout. See Figure 1 for a detailed control panel layout for your model. NO NO NO NO NOTE TE TE TE TE Upon initial power being applied to the range, the function LED lights will flash while the electronic control completes its self test mode. The lights will continue flashing until the Function Knob is moved to some other position and back to "Off". At this time the range is ready for use. NO NO NOTE
Inhaltszusammenfassung zur Seite Nr. 11
Cooktop Features 11 PROPER BURNER ADJUSTMENTS The color of the flame is the key to proper burner adjustment. A good flame is clear, blue and hardly visible in a well-lighted room. Each cone of flame should be steady and sharply defined. Adjust or clean burner if flame is yellow-orange. To clean burner, see instructions under General Care & Cleaning. BURNER LOCATIONS All Electrolux Icon range cooktops are equipped with sealed burners. Burner configurations vary by the model number of your range.
Inhaltszusammenfassung zur Seite Nr. 12
Cooktop Features 12 SEALED BURNER CONFIGURATIONS On E30DF74EPS ranges, there are a total of four burners, including one burner rated at a maximum output of 17,000 BTU/HR, two burners rated at a maximum of 15,000 BTU/HR and one burner rated at a maximum output of 8,500 BTU/HR. The knobs are grouped in twos. The left two knobs operate the left two burners, and the right two knobs control the two right burners. On E36DF76EPS and E48DF76EPS ranges, there are a total of six burners, including two bur
Inhaltszusammenfassung zur Seite Nr. 13
Cooktop Features/Surface Cooking 13 CONTROL KNOBS The control knobs provided with this range are designed for ease of use and longevity. The “D” shaped design of the knob shaft ensures proper orientation when reinstalling the knob. Located beneath each knob is a bezel ring that mounts to the range. PLACEMENT OF BURNER GRATES Place grates on the porcelain coated spill tray. See Figure 4. Be sure they are located correctly inside the stainless steel frame. IMPOR IMPOR IMPOR IMPOR IMPORTTTTTANT ANT
Inhaltszusammenfassung zur Seite Nr. 14
Surface Cooking 14 UTENSILS TO USE FOR BEST PERFORMANCE POOR *GOOD Curved and warped pan bottoms. • Flat bottom and straight Pan overhangs unit by more than Figure 6 2.5 cm (1”). sides. Tight fitting lids. Weight of handle does not tilt Pans should have flat bottoms. pan. Pan is well balanced. Heavy handle tilts pan. Check for flatness by rotating a Pan sizes match the amount ruler across the bottom. There of food to be prepared and the should be no gaps between the size of burner.
Inhaltszusammenfassung zur Seite Nr. 15
Surface Cooking 15 USING THE WOK STAND The Wok Stand provided with your cooktop is designed to allow round-bottomed woks to be used. It is recommended that you use a 14 inch diameter (35.5 cm) or less Wok. It is recommended that you use the right front POWER burner for model E30DF74EPS or center front POWER burner for models E36DF76EPS and E48DF76EPS with the wok stand for best performance. If properly positioned, the Wok Stand will not slide off the grate. CA CA CA CA CAUTION UTION UTION UTION
Inhaltszusammenfassung zur Seite Nr. 16
Surface Cooking 16 USING THE SIMMER PLATE The Simmer Plate has been specfically designed for simmering and holding food at the lowest safe temperature. It can be used for cooking sauces long periods of time, or melting chocolate. With the grate in position over the burner, set the simmer plate on top of the grate, centering the plate over the grate fingers (See Figure 11). Then place the utensil on the simmer plate. The Simmer Plate is to be used by setting the burner to its lowest setting. The
Inhaltszusammenfassung zur Seite Nr. 17
Surface Cooking 17 SETTING SURFACE CONTROLS Your range may be equipped with any combination of the following burners: Simmer Burner: best used for simmering delicate sauces, etc. Standard Burner: used for most all surface cooking needs. Large Burner: best used when bringing large quantities of liquid to temperature and when preparing larger quantities of food. Regardless of size, always select a utensil that is suitable for the amount and type of food being prepared. Select a burner and flame si
Inhaltszusammenfassung zur Seite Nr. 18
Operation 18 BEFORE COOKING Ensure that the range has been installed by a qualified individual who has tested the operation of the range in accordance with the Installation Instructions. The brass burner rings, burner caps, grates, knobs and spill protectors must be in place for the cooktop to operate properly. All range components must be clean. Be certain that the gas and electrical power supplies to the range are operational. Read this Use and Care Manual in its entirety prior to operating t
Inhaltszusammenfassung zur Seite Nr. 19
Operation 19 WARNING WARNING WARNING WARNING WARNING Do not touch any burner cap, burner base, or igniter while the igniters are sparking, as an electrical shock could result. IMPOR IMPOR IMPORTTTANT ANT ANT IMPOR IMPORTTANT ANT If the gas does not ignite within four seconds, turn off the valve. Allow at least two minutes for any gas to dissipate, then repeat the lighting procedure. Burner igniters must always be kept clean and dry to function properly. Due to the Vantage-Flame™ reignition f
Inhaltszusammenfassung zur Seite Nr. 20
Operation 20 SETTING THE BURNER FLAME HEIGHT Setting the proper burner flame height for the desired cooking process and selected utensil will result in superior cooking performance, while also saving time and energy. Follow these recommendations for best results: 1. Use low or medium flame heights when cooking in utensils that are poor conductors of heat, such as glass, ceramic, and cast iron cooking vessels. Reduce the flame height until it covers approximately 1/3 of the utensil diameter. This
