Inhaltszusammenfassung zur Seite Nr. 1
Operating Instructions
Memory Card Portable Recorder
Model No. AG-HPG10P
Before operating this product, please read the instructions carefully and save this manual for
future use.
D ENGLISH
F0707K0 -M
Printed in Japan
VQT1H84
Menu
For your Displays Editing Saving data Recording Playback Preparations Name of the Introduction
reference parts
Inhaltszusammenfassung zur Seite Nr. 2
Read this first! indicates safety information. CAUTION CAUTION: THE AC RECEPTACLE (MAINS SOCKET RISK OF ELECTRIC SHOCK DO NOT OPEN OUTLET) SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). ACCESSIBLE. NO USER-SERVICEABLE PARTS INSIDE. TO COMPLETELY DISCONNECT THIS REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER CORD PLUG The lightning flash wit
Inhaltszusammenfassung zur Seite Nr. 3
indicates safety information. FCC NOTICE (USA) Declaration of Conformity Model Number: AG-HPG10 Trade Name: PANASONIC Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support contact: Panasonic Broadcast & Television Systems Company 1-800-524-1448 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interferen
Inhaltszusammenfassung zur Seite Nr. 4
Recommendation for Use of Genuine Panasonic Battery Pack (Rechargeable Battery) Thank you for using a Panasonic product. It has been our policy to recommend that the genuine Panasonic battery pack be used for any Panasonic product that uses a battery pack, including digital cameras. It has, however, been found that imitation battery packs that look very similar to the genuine Panasonic battery pack are marketed in some markets. Some of these imitation battery packs are not equipped with any
Inhaltszusammenfassung zur Seite Nr. 5
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the pol
Inhaltszusammenfassung zur Seite Nr. 6
Contents Read this first! ................................................ 2 Playback Introduction Thumbnail display ........................................ 28 Playback formats ............................................. 28 Recommendation for Use of Genuine Switching playback formats ............................. 28 Panasonic Battery Pack Names and functions thumbnail display screen (Rechargeable Battery) .......................... 4 parts ..................................................
Inhaltszusammenfassung zur Seite Nr. 7
Saving data Menu Copying data from P2 cards to the hard Basic operations on the setting menus ..... 70 drive ....................................................... 50 Initializing the setting menu ............................. 70 Copying data from P2 cards to the hard Setting menu configuration ......................... 71 drive (USB HOST mode) ....................... 51 List of setting menus ................................... 72 Switching to the USB HOST mode .................. 51 RECORDING S
Inhaltszusammenfassung zur Seite Nr. 8
AG-HPG10 AG-HPG10 AG-HPG10 How to use the unit Housed in a compact cabinet which can be battery-powered, this Portable Memory Card Recorder comes with two P2 card slots, a 3.5-inch LCD monitor, USB 2.0, IEEE1394, component signal, composite signal and many other input/output signal connectors, and it can be easily operated to play back the data content which has been shot by a P2 camera recorder. It is also capable of backup recording and file management, and it supports P2 field recording.
Inhaltszusammenfassung zur Seite Nr. 9
AG-HPG10 AG-HPG10 Saving data in external devices Saving data onto an external hard drive 4 (page 50) The data content of P2 cards can be saved onto an external hard drive. Also, the data saved on an external hard drive can be reloaded onto a P2 card. (Only in the USB HOST mode) AG-HPG10 (this unit) Hard drive P2 card 1394 cable/USB 2.0 cable Editing Editing by connecting the unit to a PC 5 (page 62) The unit can be connected to a PC, and the PC can then be used to edit the data content on P2
Inhaltszusammenfassung zur Seite Nr. 10
About this manual Note concerning illustrations in these instructions • Illustrations (portable recorder, menu screens, etc.) in these operating instructions differ slightly from the actual portable recorder. References • References are shown as (Page 10). 10
Inhaltszusammenfassung zur Seite Nr. 11
Before use Be absolutely sure to check the calendar and time zone, and set them if necessary. • The calendar and time zone affect the management and playback sequence of the data content which has been recorded. Before recording, set and check the calendar and time zone. (Page 21) No compensation can be made for video recordings. • The manufacturer will not provide any compensation in the event that images fail to be recorded due to trouble while the unit and P2 card are being used. Concernin
Inhaltszusammenfassung zur Seite Nr. 12
Name of the parts Operation area 1 9 2 10 3 11 4 5 6 12 7 8 13 1 REC button (page 48) 8 MENU/MODE CHK button 2 POWER button (page 16) (Page 17) 3 PLAY button (page 17) 9 COUNTER button (page 49) 4 STILL button (page 17) 10 RESET/TC SET button (page 20) 5 REW button (page 17) 11 FF button (page 17) 6 THUMBNAIL/MODE button 12 USER button (page 25) (Page 17) 13 PAGE/AUDIO MON/VAR button 7 STOP button (page 17) (Page 43) 12
Inhaltszusammenfassung zur Seite Nr. 13
AG-HPG10 Mechanism area and input/output connector area 13 14 15 16 20 OUTPUT CH 1 AUDIO CH 2 VIDEO HD/SD-SDI 8 1 COMPONENT OUT 1394 17 REC POWER COUNTER 2 RESET/ SET TC SET USER THUMBNAIL /MODE 1 2 MENU/MODE CHK 3 PAGE / AUDIO MON / VAR 3 6 7 4 10 5 HOST 18 OPEN 11 DEVICE 9 19 12 1 LCD monitor (page 16) 12 Battery (page 14) 2 Power plug (page 16) 13 AUDIO OUT CH1/CH2 connectors (page 46) 3 SD card access LEDs (page 26) 14 VIDEO OUT connector (page 46) 4 P2 card access LEDs (page 22) 15 HD
Inhaltszusammenfassung zur Seite Nr. 14
Charging the battery Charging Before using the battery, give it a full charge using Charging time and play time of supplied battery the AC adapter. It is recommended that you have a Capacity Charging Continuous spare battery available in case you need it. time playback time 5400 mAh Approx. 330 Approx. 240 1 Place the battery horizontally while aligning minutes minutes it with the mark on the AC adapter, and slide it into position. • The times given in the above table are • If the DC cabl
Inhaltszusammenfassung zur Seite Nr. 15
Installing and removing the power supply Installing and removing the battery Insertion Removal 1 Insert the battery until it clicks into place. 1 Press [POWER] for at least 2 seconds to turn the power off, and check that the power OUTPUT lamp has gone off (page 16). CH 1 AUDIO CH 2 VIDEO HD/SD-SDI 2 Remove the battery while pressing the COMPONENT OUT 1394 battery eject button. • Support the battery with your hand to ensure that it will not drop down. OPEN OUTPUT CH 1 AUDIO CH 2 VIDEO HD/SD-S
Inhaltszusammenfassung zur Seite Nr. 16
AG-HPG10 AG-HPG10 AG-HPG10 AG-HPG10 Basic operations Turning the power on and off Hold down [POWER] for at least 2 seconds. The power lamp lights, and the power is turned on. When [POWER] has been held down for more than 2 seconds while the power is on, the power lamp will go off, and the power will be turned off. Using the LCD monitor 1 Hold down [POWER] for at least 2 seconds to turn the power on. 2 Raise the LCD monitor while pressing the LCD monitor open button in the direction shown by
Inhaltszusammenfassung zur Seite Nr. 17
AG-HPG10 Menu operations This unit is provided with three kinds of screens: the thumbnail display screen, thumbnail display off screen (1394 input standby mode, playback standby mode) and PC mode screen. When [MENU] is pressed on any of these screens, the menu will be displayed. (No menus are displayed in the USB DEVICE mode or 1394 DEVICE mode.) Operations performed when the function buttons are pressed This is used to move the menu highlighting to the item above; depending on the menu it
Inhaltszusammenfassung zur Seite Nr. 18
Basic operations (continued) Operation modes This unit has the following 3 modes which can be selected by pressing [MODE]. Turn on the power. Thumbnail display screen On this screen, the data content on the P2 cards is displayed as thumbnails to play back or manage the clips. Playback Hold down this button (PLAY, STILL, FF, REW) for at least 2 seconds to switch to the PC mode. Stop (STOP) When a P2 card has been ejected Thumbnail display off screen (1394 input recording st
Inhaltszusammenfassung zur Seite Nr. 19
PC mode Connect the unit to the external device, and save or manage the clips. Depending on the connection method and application, the USB HOST mode, USB DEVICE mode, 1394 HOST mode and 1394 DEVICE mode are available; perform the mode settings using the setting menu on the thumbnail display off screen. USB HOST mode Connect to a device equipped with a USB connector, and operate the connected device. 1394 HOST mode Connect to a device equipped with an IEEE1394 connector,
Inhaltszusammenfassung zur Seite Nr. 20
Basic operations (continued) LCD monitor settings 1 Hold down [POWER] for at least 2 seconds 6 Using [FF] or [REW], adjust the selected to turn the power on. item. First check that an image is displayed on the 7 Press [MENU] 3 times to release the menu LCD monitor, and then adjust the angle of the mode. monitor to the position where it is easiest to see its displays. • The adjusted values can be restored to their 2 Press [MODE] to display the thumbnail factory settings by pressing [RESET].
