Inhaltszusammenfassung zur Seite Nr. 1
Commercial Series
Radio CP160
User Guide
6866550D05-O
Issue: December 2003
Inhaltszusammenfassung zur Seite Nr. 2
2 3 13 1 4 5 11 6 7 12 10 8 9 P2 P1
Inhaltszusammenfassung zur Seite Nr. 3
Turning the Radio On or Off . . . . . . . . . . .18 CONTENTS Radio On Message . . . . . . . . . . . . . . . . . .18 Computer Software Copyrights . . . . . . . . . 2 Adjusting the Volume. . . . . . . . . . . . . . . . .18 Selecting a Radio Channel . . . . . . . . . . . .19 RadioOverview .... ... ... ... ... .... 3 Home Revert Memory Channel (1&2) . . . .19 Operation and Control Functions . . . . . . . . 3 Store Memory Channel (1&2) . . . . . . . . . .19 Radio Controls . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS Scan. ... ... ... .... ... ... ... ... ... 27 UserSettings.. ... ... .... ... ... ... .39 Start System Scan . . . . . . . . . . . . . . . . . . 27 Set Squelch Level . . . . . . . . . . . . . . . . . . .41 Stop System Scan . . . . . . . . . . . . . . . . . . 28 Set Power Level . . . . . . . . . . . . . . . . . . . .41 Start Auto Scan . . . . . . . . . . . . . . . . . . . . 28 Option Board On/Off . . . . . . . . . . . . . . . . .42 Stop Auto Scan . . . . . . . . . . . . . . . . . . . . 28
Inhaltszusammenfassung zur Seite Nr. 5
3. Channel Selector Knob RADIO OVERVIEW Used to switch the radio to different channels. 4. LED Indicators This user guide covers the operation of the CP160 Indicate radio status: Portable Radios. Green: Solid during power up routine; off after Before using this product, read the successful power up; flashing when scanning. operating instructions for safe usage Red: Solid - transmitting; Flashing when contained in the Product Safety and transmitting - low battery: ! RF Exposure booklet 686
Inhaltszusammenfassung zur Seite Nr. 6
RADIO OVERVIEW The following table is a summary of programmable Programmable Buttons radio features and corresponding page references. Your radio has four programmable buttons. Your In the “Button” column, have your dealer record the dealer can program these buttons as shortcuts to name of the programmable button next to the various radio features. feature that has been programmed to it. Check with your dealer for a complete list of Also, where appropriate, have your dealer indicate funct
Inhaltszusammenfassung zur Seite Nr. 7
Feature Indicator Short Press Long Press Hold Down Page Button Checks the Battery —— battery charge 9 Indicator status. J button enters Menu Mode and selects menu options. Once in Menu Menu Mode — —11 J Mode, K button is automaticall † re-assigned to exit Menu Mode. Sounds a tone for adjusting the Volume Set — — — 18 radio’s volume level. Home Revert Allows instant Memory — access to the —— 19 Channel (1&2) home channel. Stores current Store Memory — channel to the —19 Channel (1&2) home
Inhaltszusammenfassung zur Seite Nr. 8
RADIO OVERVIEW Feature Indicator Short Press Long Press Hold Down Page Button Voice Operated † Transmission — Toggle VOX on and off. —21 (VOX) Toggle keypad Keypad Lock/ L between locked 22 Unlock and unlocked. † Radio Call — Directly access radio call menu. —23 Repeater/ Toggles between using a repeater or J —25 † Talkaround transmitting directly to another radio. Deletes a nuisance Scan/Nuisance Starts or stops the G channel while —27 Channel Delete Scan operation. scanning. † Edit Scan
Inhaltszusammenfassung zur Seite Nr. 9
Feature Indicator Short Press Long Press Hold Down Page Button † Option Board Toggle the option board on and off. —42 A Toggle keypad and display backlights Lights — —42 † on and off. † This function is activated by EITHER a short OR a long press, but not both. 7 English RADIO OVERVIEW
Inhaltszusammenfassung zur Seite Nr. 10
RADIO OVERVIEW Indicator Tones Positive Negative Programmable High pitched tone Low pitched tone Indicator Tone Indicator Tone Buttons Scan Start Stop Self Test Pass Tone Power Level High Low Squelch Tight Normal Repeater/ Does not use Uses repeater Self Test Fail Tone Talkaround repeater VOX Enabled Disabled Positive Indicator Tone Silent Monitor/ — Enabled Open Squelch Negative Indicator Tone Home Revert — Enabled Memory Channel (1&2) Good Key Tone Store Memory — Stored Channel (1&2) Bad Key
Inhaltszusammenfassung zur Seite Nr. 11
Battery Charge Status LED Indicator You can check battery charge status if your dealer The LED shows radio status as follows: has preprogrammed one of the programmable buttons. Hold down the preprogrammed Battery LED State Indication Indicator button. The charge status is shown on the display. Radio Call Red Solid Radio transmitting. Battery Level Display Red Flashing Receiving. Red Flashing Channel busy. Full Scan Good Green Flashing Radio is scanning. Call Alert Fair Yellow Flashing Receiv
Inhaltszusammenfassung zur Seite Nr. 12
RADIO OVERVIEW LCD DISPLAY AND ICONS Symbol Name and Description Scan Indicator G Indicates that the scan feature is activated. CHAN 32 Priority Scan Indicator H Displays radio Status, Addresses or Channel, on Indicates that the scan feature is one line of 8 characters. The top line of the display activated. The dot is flashing during shows radio status icons, explained in the table priority scan mode when scan has below: landed on a Priority 1 channel. The dot is steady during priority sca
Inhaltszusammenfassung zur Seite Nr. 13
Menu Scroll Buttons MENU BUTTONS Used to scroll while in Menu Mode. Menu Button Refer to the menu navigation chart for menu If preprogrammed by your dealer, the two front selectable features. buttons (K and J) can be used, in conjunction Navigate the Menu with other programmble features, to access and select menu options (J); and exit menu mode (K). L or M to scroll through the menu options. If The J button can be preprogrammed by your you scroll past the last option, the selection wraps
Inhaltszusammenfassung zur Seite Nr. 14
RADIO OVERVIEW MENU NAVIGATION CHART (Refer to Menu Navigation guidelines— J lower, left-hand corner of this page) Radio Repeater/ Program Phone Utilities System Tones Calls Talkround Lists Scan Squelch Reptr mode / On/Off Tone Talkrnd mode Normal/Tight On/Off Power Level Selective Scan List Call Alert Call Tone Tag High/Low add/ Select/enter Select/enter Standard/alert Option Bd delete entry 1 - 6 ID ID Set prority On/Off Escalert Menu Navigation Guidelines Lights On/Off J to enter Menu Mode. O
Inhaltszusammenfassung zur Seite Nr. 15
If a battery is new, or its charge level is very low, you GETTING STARTED will need to charge it before you can use it. When the battery level is low and the radio is in transmit BATTERY INFORMATION mode you will see the LED indicator flash red. Upon release of the PTT button, you will hear an alert Charging Your Battery tone. Note: Batteries are shipped uncharged from the This radio is powered by a either a nickel-metal factory. Always charge a new battery 14 to 16 hydride (NiMH), or a
Inhaltszusammenfassung zur Seite Nr. 16
GETTING STARTED Desktop Rapid Charger LED color Status To Charge the Battery No LED Indication Battery inserted incorrectly 1 Turn the radio off. or battery not detected. Single Green Flash Successful charger 2 Place the battery, with or without the radio, in power-up. the charger pocket. a Flashing Red Battery unchargeable or not The charger LED indicates the charging making proper contact. progress. Red Battery is charging. Flashing Yellow Battery in charger but waiting to be charged.
Inhaltszusammenfassung zur Seite Nr. 17
Removing the Battery ACCESSORY INFORMATION Attaching the Battery Battery Latch Locked Un-locked 1 Turn off the radio if it is turned on. 2 Slide the battery latch into the unlock position. 1 Align the battery to the battery rails on the Disengage by pushing downward and holding back of the radio (approximately 1 cm from the the latch towards the front of the radio. top of the radio.) 2 Press the battery firmly to the radio and slide 3 With the battery latch disengaged, slide the the
Inhaltszusammenfassung zur Seite Nr. 18
GETTING STARTED Attaching the Antenna Removing the Antenna Turn the antenna clockwise to attach it. Turn the antenna counter-clockwise to remove it. 16 English
Inhaltszusammenfassung zur Seite Nr. 19
Attaching the Belt Clip Removing the Belt Clip Belt Clip Tab 1 Align the grooves of the belt clip with those of 1 Use a key to press the belt clip tab away from the battery. the battery to unlock the belt clip. 2 Press the belt clip downward until you hear a 2 Slide the belt clip upward to remove it. click. 17 English GETTING STARTED
Inhaltszusammenfassung zur Seite Nr. 20
GETTING STARTED TURNING THE RADIO ON OR OFF RADIO ON MESSAGE At power up the radio may display a message customised by your dealer, e.g.: RADIO ON After this text has been displayed, the radio performs a self test routine. During the routine the Green LED lights. On completion of a successful self test the radio produces the Self-Test pass Tone, the Green LED indicator goes out and the display shows the channel that was in use at power down, typically: ON OFF CHAN 32 Turn the On/Off/Vol
