Bedienungsanleitung Genie RB709U-NB

Inhaltszusammenfassung zur Seite Nr. 1

Specifications
RB709U-NB
Relay Output Universal Receiver
Compatible transmitter:
• G TO gray narrow band transmitters (318MHz)
Owner’s Manual
Power input:
• 8-24 V ac/dc, 10ma standby , 40ma activated (Red & Black wires).
Designed to work with most brands of gate and
Outputs: 2 channels pulsed outputs
door openers.
• 2 channels dry -contact normally open relay outputs.
• Channel 1: Blue (N/O Contact) & Green (COM) wires.
• Channel 2: Y ellow (N/O Contact) & Brown (COM) wires.
•

Inhaltszusammenfassung zur Seite Nr. 2

Programming the Receiver Wiring Receiver to GTO GP-SL100 & GP-SW100 Operators Programming transmitter(s) or other access devices to RB709U- NB receiver: • Press and hold the transmitter (device) button to be learned. • Press the ‘LEARN CH1’ (or ‘LEARN CH2’) button on the RB70 9U-NB receiver G TO GP -SL100 and GP -SW100 Contol Board for 1-2 seconds or until the red LED turns on, then release the but ton. • Note: When the correct code is received and the correspondin g relay output is activat