Bedienungsanleitung InFocus SP-CEIL-010

Inhaltszusammenfassung zur Seite Nr. 1

Hardware description

The Digital Projector Mount utilizes the following hardware. Note that the letters associated with the hardware
on this list correspond to the letters listed in the instructions for each installation method.



A. Four (4) 6 (mm) x 10 (mm) Phillips head screws (supplied)

27700B S.W. Parkway Ave.
Wilsonville, Oregon 97070-9215

1-800-294-6400

www.infocus.com

B. One (1) mounting bracket (supplied)
SP-CEIL-010 DIGITAL PROJECTOR MOUNT

Installation Ins

Inhaltszusammenfassung zur Seite Nr. 2

Tools Needed for Installing the Digital Projector Mount Getting the projector ready You need the following tools to install the Digital Projector Mount: Before you start the installation process, prepare your Digital Projector by performing the following steps (FIGURE 1). • Phillips head screwdriver (not included) 1. Turn the projector (C) upside down and place it on a clean flat surface, preferably on a towel. • Allen wrench (included) 2. Locate the mounting bracket (B) and align

Inhaltszusammenfassung zur Seite Nr. 3

Wood stud E Ceiling structure Center of wood stud Ceiling plate Remove (M8) Hex head screws, flat washers and star lock washers D Remove the center extension from the assembly Insert and rotate 180° and lock down B C Remove (M8) Hex head screws, flat A washers and star Solid ceiling structure lock washers E Replace the ceiling plate D Bottom assembly C B Insert and rotate 180° and lock down

Inhaltszusammenfassung zur Seite Nr. 4

Wood stud E Ceiling structure Center of wood stud Adjustable Height Ceiling Installation Complete the following steps to install the projector mount and projector on your ceiling with the optional D Adjustable screws suspension adapter. This installation works best with high ceilings (FIGURE 3). Extension adapter Note: Look at the bottom of the upper assembly (D) and locate the arrow. Make sure you install the projector mount with the arrow pointing toward your screen.

Inhaltszusammenfassung zur Seite Nr. 5

Wall Mount Installation Wall wood stud Complete the following steps to install the projector mount and projector to your wall. (FIGURE 4) Note: Look at the bottom of the upper assembly (D) and locate the arrow. Make sure you install the projector D mount with the arrow pointing toward your screen. Wall structure NOTE: Follow step 3 to secure the extension to the mount assembly. 15. Secure the upper plate to the wall using the commercially available hardware (E) suitable for your en