Inhaltszusammenfassung zur Seite Nr. 1
®
ViewSonic
- User Guide
PJD7383/ PJD7383i
- Guide de l’utilisateur
PJD7583w/PJD7583wi
DLP Projector
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Podręcznik użytkownika
- Pyководство пользователя
- Kullanιcι kιlavuzu
- 使用手冊(繁中)
IMPORTANT: Please read this User Guide to obtain important
- 使用手册 (简体)
information on installing and using your product in a safe
manner, as well as registering your product for future service.
- 사용자
Inhaltszusammenfassung zur Seite Nr. 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation o penings. Install the unit in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety
Inhaltszusammenfassung zur Seite Nr. 4
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance Actual Concentration Concentration Lead (Pb) 0.1% < 0
Inhaltszusammenfassung zur Seite Nr. 5
Copyright Information ® Copyright © ViewSonic Corporation, 2011. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Inhaltszusammenfassung zur Seite Nr. 6
Table of contents Controlling the projector through Important safety a LAN environment........................... 39 instructions .......................3 Displaying images through vsPresenter......................................... 46 Introduction......................5 Displaying pictures with a USB Projector features ................................. 5 storage device .................................... 50 Shipping contents................................. 6 Using the PointBlank pen Pro
Inhaltszusammenfassung zur Seite Nr. 7
Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may d
Inhaltszusammenfassung zur Seite Nr. 8
13. Do not block the ventilation holes. If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire. - Do not place this projector on a blanket, bedding or any other soft surface. - Do not cover this projector with a cloth or any other item. - Do not place inflammables near the projector. 14. Always place the projector on a level, horizontal surface during operation. - Do not use if tilted at an angle of more than 10 degrees left to right, n
Inhaltszusammenfassung zur Seite Nr. 9
Introduction Projector features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features. • Short throw lens to create larger images with less distance between the projector and the screen • Presentation timer for better control of time during presentations • PointBlank pen for interactive function (PJD7383i/PJD7583wi only) • LAN Settings allowing management of project
Inhaltszusammenfassung zur Seite Nr. 10
Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Projector Power Cord VGA Cable Multi-language user manual Quick Start Guide Remote Control & Battery DVD PointBlank pen (PJD7383i/ USB Cable (PJD7383i/ PJD7583wi only) PJD7583wi only) Optional accessories 1. Ceilin
Inhaltszusammenfassung zur Seite Nr. 11
Projector exterior view 1. External control panel Front/upper side (See "Projector" on page 8 for details.) 2. Lamp cover 1 3. Vent (heated air exhaust) 4. Quick-release button 2 5. Lens cover 6. Front IR remote sensor 7. Focus ring 8. Projection lens 3 9. Kensington anti-theft lock slot 10. AC power cord inlet 4 11. Rear IR remote sensor 6 12. RJ45 LAN input port 5 7 13. Mini B USB port 8 14. Type A USB port 15. RS-232 control port 16. RGB signal output socket Rear/lower side 17. RGB (PC)/Comp
Inhaltszusammenfassung zur Seite Nr. 12
Controls and functions Projector 1. Focus ring 1 Adjusts the focus of the projected image. 2. TEMPerature indicator light Lights up red if the projector's temperature becomes too high. 3. POWER indicator light Lights up or flashes when the projector is 2 under operation. 3 7 I I POWER 8 4 Toggles the projector between standby 5 9 mode and on. 4 10 4. Keystone/Arrow keys ( / Up, / 11 6 Down) Manually corrects distorted images resulting from an angled projection. 5. Left/Blank Hides the screen
Inhaltszusammenfassung zur Seite Nr. 13
Remote control I I 1. POWER Toggles the projector between standby 1 13 mode and on. 2. Source selection keys (VGA 1/VGA 2 2/Video) 14 Selects an input source for display. 3 15 3. Source Displays the source selection bar. 4 4. / / / 16 Selects the desired menu items and makes adjustments. 5 5. ENTER Enacts the selected On-Screen Display 6 17 (OSD) menu item. 7 6. Menu/ Turns on the On-Screen Display 8 18 (OSD) menu. 9 Performs the same function as the left 10 19 mouse button when the mouse
Inhaltszusammenfassung zur Seite Nr. 14
13. Laser Using the remote mouse control Emits visible laser pointer light for The capability of operating your computer with presentation purposes. the remote control gives you more flexibility 14. Page Up/Page Down when delivering presentations. Operates your display software program 1. Connect the projector to your PC or (on a connected PC) which responds to notebook with a USB cable prior to using page up/down commands (like Microsoft the remote control in place of your PowerPoint)
Inhaltszusammenfassung zur Seite Nr. 15
App rox. 15° Remote control effective range Infra-Red (IR) remote control sensors are located on the front and the back of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensors to function correctly. The distance between the remote control and the sensors should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensors on the projector that might obstr
Inhaltszusammenfassung zur Seite Nr. 16
Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the projector placed near the
Inhaltszusammenfassung zur Seite Nr. 17
Projection dimensions Refer to "Dimensions" on page 77 for the center of lens dimensions of this projector before calculating the appropriate position. PJD7383/PJD7383i • 4:3 image on a 4:3 screen (a) (b) (e) (a) (f) (d) (c) (c) (d) (f) (e) (b) • 16:9 image on a 4:3 screen (b) (a) (a) (e) (f) (d) (c) (c) (d) (f) (b) (e) (e): Screen (f): Center of lens 4:3 image 16:9 image (a) Screen (b) Projection (b) Projection (c) Image (d) Vertical (c) Image (d) Vertical Size distance [m (inch)] distance
Inhaltszusammenfassung zur Seite Nr. 18
PJD7583w/PJD7583wi • 16:10 image on a 16:10 screen (b) (a) (a) (e) (f) (d) (c) (c) (d) (f) (b) (e) • 16:10 image on a 4:3 screen (b) (a) (a) (e) (f) (d) (c) (c) (d) (f) (b) (e) (e): Screen (f): Center of lens 16:10 image 16:10 image (a) 16:10 (a) 4:3 (b) (b) (c) Image (d) Vertical (c) Image (d) Vertical Screen Size Screen Size Projection Projection height offset height offset [inch (m)] [inch (m)] distance [m distance [m [cm (inch)] [cm (inch)] [cm (inch) [cm (inch)] (inch)] (inch)] 30 (0.
Inhaltszusammenfassung zur Seite Nr. 19
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 6). They are commercially available from electronics stores. • The connection illustrations below are for reference only. The rear connecting jacks available
Inhaltszusammenfassung zur Seite Nr. 20
Connecting a computer or monitor Connecting a computer The projector provides two VGA input sockets that allow you to connect them to both IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer: • Using a VGA cable 1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer. 2. Connect the other end of the VGA cable to the COMPUTER