Inhaltszusammenfassung zur Seite Nr. 1
Portable DLP
Inhaltszusammenfassung zur Seite Nr. 2
Compliance Information For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this unit near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or groundi
Inhaltszusammenfassung zur Seite Nr. 4
Copyright © 2005 ViewSonic Corporation. All rights reserved. Apple, Mac and ADB registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo and OnView are registered trademarks of ViewSonic Corporation. VESA and SVGA are registered trademarks of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA. PS/2,
Inhaltszusammenfassung zur Seite Nr. 5
Notes on AC Power Cord AC Power Cord must meet requirement of country where you use a projector. Confirm an AC plug type with graphics below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. This projector is equipped with a grounding type AC line plug. Make sure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recommend using a video source device also equipped with a
Inhaltszusammenfassung zur Seite Nr. 6
CONTENTS Product Introduction ................................................................................................. 6 Projector Features ............................................................................................. 6 Package Contents ............................................................................................. 7 Getting to Know the Projector .................................................................................. 8 Projector Components ......
Inhaltszusammenfassung zur Seite Nr. 7
Product Introduction Projector Features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features: Single chip 0.55" Texas Instruments DLP™ technology SVGA (800 x 600 pixels) Compact size, light weight for portability 1.2x manual zoom lens Auto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scaling compression compatibility for VGA, SVGA, XGA*and SXGA*. State-
Inhaltszusammenfassung zur Seite Nr. 8
Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord VGA Cable (D-SUB to D-SUB) S-Video Cable Composite Video Cable Audio Cable Battery for Projector Remote Control Remote Control (IR) Carrying Case Quick Start Guide Optional Accessory: VGA (D-SUB) to Wizard CD HDTV (RCA) Cable Save the original shipping carton and packing material; they will come in handy if you ever to ship your unit. For maximum protection, repack NOT
Inhaltszusammenfassung zur Seite Nr. 9
Getting to Know the Projector Projector Components Front View 10 8 7 6 5 4 9 1 2 3 1. Lens cap 6. Focus ring 2. Lens cap strap 7. Control panel 3. Lens 8. Speaker 4. Ventilation holes (intake) 9. Front IR remote control sensor 5. Zoom ring 10. Ventilation holes (exhaust) ViewSonic PJ402D 8
Inhaltszusammenfassung zur Seite Nr. 10
Rear View 1. Interface connector 2. Rear IR remote control sensor 3. Security lock receptacle 4. AC power socket 5. Ventilation holes (intake) 6. Foot adjuster 7. Foot adjuster button 1 2 3 7 6 4 5 6 7 Bottom View 1. Lamp cover 1 ViewSonic PJ402D 9
Inhaltszusammenfassung zur Seite Nr. 11
Control Panel LED 1. POWER (Power LED indicator) 1 1 2. LAMP (Lamp LED indicator) 2 2 Button 3 1. 4 2. MENU\ENTER 5 3. KEYSTONE ( / ) 4. AUTO ( ) 5. Four direction buttons 6. SOURCE ( ) 6 Interface Connector 1 2 3 4 5 1. USB connector This connector is used for engineering purpose. 2. AUDIO input connector Connect an audio output from video equipment to this jack. 3. COMPUTER IN (D-SUB) connector Connect image input signal (analog) to this connector. 4. S-VIDEO connector Connect S-Video out
Inhaltszusammenfassung zur Seite Nr. 12
Remote Control Components 1. Power button 2. Four direction buttons 3. Menu button 1 7 POWER AUTO SOURCE 11 4. Enter button 2 5. Keystone / buttons 3 6. Volume / buttons MENU 7. Source button 4 9 ENTER BLANK 8. Mute button 10 9. Blank button LASER 6 5 10. 4:3/16:9 button VOLUME 4:3/16:9 KEYSTONE 11. Auto button MUTE 8 ViewSonic PJ402D 11
Inhaltszusammenfassung zur Seite Nr. 13
Installation Connecting the Projector A. Connecting to a computer AC Power Cord 1 2 VGA Cable (D-SUB to D-SUB) 1 Desktop type Laptop type 2 ViewSonic PJ402D 12
Inhaltszusammenfassung zur Seite Nr. 14
B. Connecting to a Video Source 1.Connecting with S-Video Cable AC Power Cord 1 2 S-Video Cable Audio Cable 3 1 3 2 ViewSonic PJ402D 13
Inhaltszusammenfassung zur Seite Nr. 15
2.Connecting with Composite Video Cable AC Power Cord 1 Composite Video Cable 2 Audio Cable 3 1 3 2 ViewSonic PJ402D 14
Inhaltszusammenfassung zur Seite Nr. 16
3.Connecting with HDTV Cable 1 AC Power Cord 2 D-SUB to HDTV Cable 3 Audio Cable 1 3 2 When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. ViewSonic PJ402D 15
Inhaltszusammenfassung zur Seite Nr. 17
Powering On/Off the Projector Powering On the Projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and peripheral signal cable(s) connections. 3. Press the button on the Projector Control Panel or the Power button on the Remote Control to turn on the power. 4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source. If the “Searching for source” message appears on the screen, ensure that the appropriate signal cable(s) are secu
Inhaltszusammenfassung zur Seite Nr. 18
Adjusting the Projected Image Adjusting the Projector Height To raise the projector: 1. Lift up the rear side of the projector, and press the foot adjuster buttons on the two sides. 2. Raise the projector to the desired display height, and then release the buttons to lock the foot adjusters into position. To lower the projector: 1. Lift up the rear side of the projector, and press the foot adjuster buttons on the two sides. 2. Lower the projector, and then release the buttons to lock the foot ad
Inhaltszusammenfassung zur Seite Nr. 19
Adjusting the Projector Zoom and Focus Focus Ring Zoom Ring 1. Adjust the image size by rotating the zoom ring. Rotate to the right to reduce the image. Rotate to the left to enlarge the image. 2. Focus the image by rotating the focus ring. A still image is recommended for focusing. Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. Distance between the screen and the center of the lens ViewSonic PJ402D 18
Inhaltszusammenfassung zur Seite Nr. 20
Projection 4 : 3 Screen Size –Diagonal 16 : 9 Screen Size-Diagonal Distance (inch) (inch) (m) Wide Tele Wide Tele 1.2 33.0 27.5 30.2 25.2 1.5 41.2 34.3 37.8 31.5 2 55.0 45.8 50.4 42.0 2.2 60.5 50.4 55.5 46.2 3 82.5 68.7 75.7 63.1 4 110.0 91.6 100.9 84.1 5 137.5 114.5 126.2 105.1 6 165.0 137.5 151.4 126.2 7 192.5 160.4 176.6 147.2 8 220.0 183.3 201.9 168.2 9 247.5 206.2 227.1 189.3 10 275.0 229.1 252.4 210.3 * This table is for user reference only. Position the projec
