Inhaltszusammenfassung zur Seite Nr. 1
PJ452
LCD Projector
Inhaltszusammenfassung zur Seite Nr. 2
Compliance Information FOR U.S.A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including
Inhaltszusammenfassung zur Seite Nr. 4
Copyright Information Copyright © 2005 ViewSonic® Corporation. All rights reserved. Apple, Mac and ADB registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo and OnView are registered trademarks of ViewSonic Corporation. VESA and SVGA are registered trademarks of the Video Electronics Standards Association. DPMS and
Inhaltszusammenfassung zur Seite Nr. 5
Projector PJ452 Model No.VS10948 User’s Manual – Operating Guide Thank you for purchasing this projector. WARNING ►Before using, read the "User’s Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. WARNING This symbol indicates information that, if ignored, could possibl
Inhaltszusammenfassung zur Seite Nr. 6
Contents About this manual ................................ 1 Multifunctional settings......................22 Using the menu function...................22 Contents ................................................ 2 EASY MENU....................................25 Projector features ................................. 3 Aspect, Keystone, Mode, Bright, About contents of package................... 3 Contrast, Color, Tint, Sharpness, Part names ............................................ 4
Inhaltszusammenfassung zur Seite Nr. 7
Projector features This projector is used to project various computer signals as well as NTSC/PAL/SECAM video signals onto a screen. It requires just a little space for installation and displays a large image from a short distance. O High Brightness Newly developed 165W UHB (Ultra High Brightness) lamp gives you a higher brightness image on a screen. The image can be still kept as bright and clean enough for use in bright rooms. O Low Noise WHISPER mode is equipped for reducing acoustic
Inhaltszusammenfassung zur Seite Nr. 8
Part names Projector Focus ring ( 19) Vent ( 10) Remote sensor ( 8) Lens ( 16, 45) Speaker Lens cover ( 6, 16) Elevator button ( 12) Elevator foot ( 12) Front-Right side Lamp cover ( 42) Filter cover ( 9, 10, 43) (Lamp unit is inside.) (Air filter and intake vent are inside.) Bottom side Control buttons ( 5) Power switch ( 16,17) AC inlet ( 15) Ports Elevator button ( 12) (See below.) Elevator foot ( 12) Rear-Left side Vent ( 10) S-VIDEO ( 14) RGB
Inhaltszusammenfassung zur Seite Nr. 9
Controls LAMP indicator ( 48) TEMP indicator ( 48) POWER indicator ( 16, 17, 48) INPUT button ( 18) Cursor buttons , , , ( 18~40) STANDBY/ON button ( 16, 17) Remote control SEARCH button STANDBY/ON button 16) ( 19) AUTO button ( 20) RGB button ( 18) BLANK button ( 21) VIDEO button ( 18) ASPECT button VOLUME button ( 18) ( 19) MUTE button ( 18) MAGNIFY ON button ( 21) OFF button ( 21) KEYSTONE button ( 20) FREEZE button Zoom ( 21) + bu
Inhaltszusammenfassung zur Seite Nr. 10
Preparations Fastening the lens cover WARNING ►Do not fasten the lens cover during use or immediately after use. Handling while the projector is at a high temperature could cause a burn and/or malfunction to the projector. Before operating, make sure that the power switch is off, that the power cord is not plugged in, and that the projector is adequately cooled. To avoid losing, please fasten the lens cover to the projector using the strap. 1. Slowly turn over the projector, so that the
Inhaltszusammenfassung zur Seite Nr. 11
Putting batteries WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment. • Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not use a new battery with used one. • Make sure the plus and minus terminals are correctly aligned when loading a battery. • Keep a bat
Inhaltszusammenfassung zur Seite Nr. 12
Using the remote control CAUTION ►Be careful in handling the remote control. Incorrect handling could cause damage or malfunction. • Do not drop or otherwise expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects. • Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote control for an extended period. • Replace the batteries whenever the remote control starts to malfunction. •
Inhaltszusammenfassung zur Seite Nr. 13
About the filter cover for bottom-up use WARNING ►Do not replace the filter cover and/or air filter during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/or malfunction to the projector. Before operating, make sure that the power switch is off, that the power cord is not plugged in, and that the projector is cooled adequately. When the projector is installed bottom up, please use the accessory filter cover for bottom-up use. It i
Inhaltszusammenfassung zur Seite Nr. 14
Setting up WARNING ►Place the projector in a stable position horizontally. A fall or a turnover could cause an injury and/or damage to the projector. Then using a damaged projector could result in a fire and/or an electric shock. • Don’t place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand. • Do not place the projector in the side/front/rear-up position, except care of the air filter. • For the projector installed bottom-up, use the accessory
Inhaltszusammenfassung zur Seite Nr. 15
Arrangement Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated (±3%) for a full size screen: 1024x768 At 4:3 screen (c) Screen height (b) Projection (a) Screen size 4:3 [cm (inch)] distance [inch (m)] [m (inch)] (a) down up 40 (1.0) 1.3 (53) 8.7 (3) 52.3 (21) 50 (1.3) 1.7 (66) 10.9 (4) 65.3 (26) 60 (1.5) 2.0 (80) 13.1 (5) 78.4 (31) 70 (1.8) 2.4 (93) 15.2 (6) 91.4 (36) 80 (2.0) 2.7
Inhaltszusammenfassung zur Seite Nr. 16
Adjusting the projector's elevator WARNING ►Do not adjust the projector’s elevator during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/or malfunction to the projector. Before operating, make sure that the power switch is off, that the power cord is not plugged in, and that the projector is cool adequately. CAUTION ►If you press the elevator button without holding the projector, the projector might crash down, overturn, smash yo
Inhaltszusammenfassung zur Seite Nr. 17
Connecting your devices CAUTION ►Turn off all devices prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. ►Use the accessory cable or a designated-type cable for the connection. Some cables have to be used with core set. A too long cable may cause a certain picture degradation. Please consult with your dealer fo
Inhaltszusammenfassung zur Seite Nr. 18
Examples of connection with a computer Audio cable (stereo mini) RGB cable RS-232C cable RS-232C RGB out Audio out Examples of connection with a VCR/DVD player Audio cable (stereo mini) Video cable Audio Video out out Audio cable (stereo mini) S-Video cable Audio S-Video out out Audio cable (stereo mini) Component video cable Audi
Inhaltszusammenfassung zur Seite Nr. 19
Connecting power supply WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated for use with the power cord's specified voltage range. • Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged
Inhaltszusammenfassung zur Seite Nr. 20
Power on/off Turning on the power WARNING ►When the power is on, a strong light is emitted. Do not look into the lens or vents of the projector. NOTE • Turn the power on in right order. Please power on the projector before the connected devices. POWER indicator STANDBY/ON button Power switch 1. Make sure that the power cord is firmly and correctly connected to the projector and outlet. 2. Open the lens cover, and set the power switch to the ON position.
