Inhaltszusammenfassung zur Seite Nr. 1
Planar TD3200
Transparent Display
USER MANUAL
www.planar.com
Inhaltszusammenfassung zur Seite Nr. 2
2 TD3200 User Manual
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Precautions 4 Introduction 5 Getting to Know Your Planar Transparent Display Monitor Display Box Feature Descriptions 5 Placing Your Monitor 6 Attaching Electrical and Video Connections 7 Using Magnetic Vinyl 8 Setup 9 Presentation of Your Material in the TD3200 Display Box Cleaning Your TD3200 10 Appendix 11 Troubleshooting 11 Specifi cations 12 Compatible video modes 13 Regulatory Summary 14 Support and Service 15 TD3200 User Manual 3
Inhaltszusammenfassung zur Seite Nr. 4
Usage Notice WARNING – Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings and precautions as recommended in this user’s manual to maximize the life of your unit and to insure the safety of the users. Do: • Turn off the display before loading content into the display box • Operate and store your transparent display box in a clean, dry environment • Be certain to determine your table, countertop or mount can support the 55lb
Inhaltszusammenfassung zur Seite Nr. 5
Introduction Getting to Know Your Planar Transparent Display Monitor Display Box Feature Descriptions Front View Back View Bottom View TD3200 User Manual 5
Inhaltszusammenfassung zur Seite Nr. 6
Placing your Monitor When used on a countertop or other supporting surface, the TD3200 can be oriented in landscape or portrait mode. Be certain to determine the table or countertop can safely support the 55lb (121kg) weight of the TD3200 display box plus the weight of the added contents. In landscape mode we recommend the access door be oriented on top but in portrait mode there is no preferred orientation as to which short side is on top. The TD3200 can also be mounted using the VESA F
Inhaltszusammenfassung zur Seite Nr. 7
Attaching Electrical and Video Connections Power is supplied to the TD3200 display box through the four pin connector of the power supply brick. Attach this to the “48C DC input” plug on the Connection Interface Plate (see fi gure below). The power switch controls both the video and the internal illumination for the display box. Your computer or media player can either employ an HDMI or DisplayPort output to interface with the TD3200. No special additional hardware is needed. Detail of C
Inhaltszusammenfassung zur Seite Nr. 8
Using Magnetic Vinyl We have fabricated the TD3200 display box from aluminum to provide a sturdy but relatively lightweight enclosure. In addition the access door and other three side panels are made from steel to allow the user to employ these surfaces for additional messaging or decoration through use of magnetic vinyl. See examples below. This material can quickly change the appearance of the exterior of the box to compliment the video content and/or to blend in with other surfaces in
Inhaltszusammenfassung zur Seite Nr. 9
Setup Presentation of Your Material in the TD3200 Display Box Place materials to be displayed inside the display box using the access door on one long side of the enclosure. Loosen the fasteners using a standard Philips #1 or #2 screwdriver. We have included a small screw driver with a clamp mount that can be positioned on the back of the TD3200 for easy storage. We have also included a magnetic lift tool with the display box that can be used to assist in raising the steel access door after
Inhaltszusammenfassung zur Seite Nr. 10
Cleaning The anti-refl ection coating on the front glass of your TD3200 should be cleaned with standard glass cleaner and a soft cloth. In order to remove fi ngerprints eff ectively it is usually better to wet the cloth with the cleaning solution and work on small sections of the glass at a time rather than starting to clean the whole surface at once. The exterior of the TD3200 can be cleaned with a standard water-based cleaning solution and a cloth. The interior of the display box can be
Inhaltszusammenfassung zur Seite Nr. 11
Appendix Troubleshooting A properly-functioning TD3200 will show a “splash screen” when power is fi rst applied. If a suitable video source is attached, the screen will then display whatever video image is being sent to the TD3200 shortly after the splash screen appears. Note that when power is applied you should also see light from the LEDs located around the perimeter of the AMLCD screen. When power is being supplied to the TD3200 power supply, the indicator light on the power brick wi
Inhaltszusammenfassung zur Seite Nr. 12
Specifi cations TD3200 - Transparent Display Monitor Product Name TD3200 Planar Part Number 997-6821-00 Viewable Size 31.25" diagonal (27.3" x 15.2") Viewing Angle (Typical) 178° Horizontal and Vertical Response Time (G-to-G, Typical) 8 ms 2 Brightness (Typical) 350 cd/m Native Display Resolution 1366 x 768 Aspect Ratio 16:9 Color Palette 16.7 million colors Pixel Pitch 0.511 mm Refresh Rate 50 to 60 Hz Exterior Dimensions (WxHxD) 29.5" (749 mm) x 17.5" (445 mm) x 15.0" (381 mm) Interior Dimen
Inhaltszusammenfassung zur Seite Nr. 13
Compatibility Modes Mode Resolution V-Frequency (Hz) VGA 640 x 480 60 WVGA 800 x 480 60 SVGA 800 x 600 60 XGA 1024 x 768 60 WXGA 1280 x 720 60 WXGA 1280 x 768 60 HD 1366 x 768 60 TD3200 User Manual 13
Inhaltszusammenfassung zur Seite Nr. 14
Compliance Information Federal Communication Commission Radio Frequency International Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference with the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance wi
Inhaltszusammenfassung zur Seite Nr. 15
Support and Service Planar is a US company based in Beaverton, Oregon and Espoo, Finland with a worldwide sales distribution network. Visit Planar at http://www.planar.com/support for product registration, operations manuals, line drawings, touch screen drivers, warranty information and access to Planar’s Technical Library for online troubleshooting. To speak with Planar Customer Support please have your model and serial number available and dial one of these numbers: Americas Support Tel:
Inhaltszusammenfassung zur Seite Nr. 16
Planar Systems, Inc. Customer Service 24x7 Online Technical Support: http://www.planar.com/support Americas Support Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-1100 Hours: M-F, 8am - 8pm Eastern Time | M-F, 5am - 5pm Pacifi c Time © 2012 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice. This document contains proprietary
