Inhaltszusammenfassung zur Seite Nr. 1
R
LCD Projector Commercial Use
Operating Instructions
Model No. PT-L780NTU
PT-L750U
R
Before operating this product, please read the instructions carefully and save this
manual for future use.
TQBH9003-6
Inhaltszusammenfassung zur Seite Nr. 2
Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-L780NTU / PT-L750U Serial number: IMPORTANT SAFETY NOTICE
Inhaltszusammenfassung zur Seite Nr. 3
CAUTION: This equipment is equipped with a three-pin grounding-type power plug. Do not remove the grounding pin on the power plug. This plug will Do not remove only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. The
Inhaltszusammenfassung zur Seite Nr. 4
Contents FRAME LOCK ................................44 Preparation Audio adjustment.............................45 IMPORTANT SAFETY NOTICE..........2 VOLUME ........................................45 Precautions with regard to safety ....6 MUTE .............................................45 Accessories......................................11 Changing the display language......45 Precautions on handling.................12 Location and function of each part ...14 Advanced Operation Using the remo
Inhaltszusammenfassung zur Seite Nr. 5
Contents (Network Functions, SD Card Functions) Other instructions .................84 Web browser control...........116 What you can do with Web Typical applications of SD card browser control ......................... 116 / network functions ...............88 Settings of Web browser control.... 116 Examples of use of SD card........... 88 Settings of projector..................... 116 Example of use of network Settings of personal computer..... 116 functions .................................
Inhaltszusammenfassung zur Seite Nr. 6
Precautions with regard to safety WARNING If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet. BDo not continue to use the projector in such cases, otherwise fire or electric shocks could result. BCheck that no more smoke is coming out, and then contact an Authorised Service Center for repairs. BDo not attempt to repair the projector yourself, as this can be d
Inhaltszusammenfassung zur Seite Nr. 7
Do not do anything that might damage the power cord or the power cord plug. BDo not damage the power cord, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle. BIf the power cord is used while damaged, electric shocks, short-circuits or fire may result. BAsk an Authorised Service Center to carry out any repairs to the power cord that might be necessary. Do not handle the power cord plug wit
Inhaltszusammenfassung zur Seite Nr. 8
Do not look into the lens while the projector is being used. BStrong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes. Do not bring your hands or other objects close to the air outlet port. BHeated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result. When replacing the lamp, allow it to cool for at least one hour be
Inhaltszusammenfassung zur Seite Nr. 9
Use only the specified batteries. BIf incorrect batteries are used, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Do not mix old and new batteries. BIf the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Do not put your weight on this projector. BYou could fall or the projector could break, and injury may result. BBe
Inhaltszusammenfassung zur Seite Nr. 10
WARNING Keep the SD memory card out of the reach of infants. • If the memory card is swallowed, death by suffocation may result. If you believe that the memory card may have been swallowed, seek medical advice immediately. Caution Do not insert any foreign objects into the card slot. • Inserting foreign objects may damage the projector. If the wireless card is inserted while some foreign object is inside the slot, it may damage the wireless card. Notes with regard to the wireless card and the pr
Inhaltszusammenfassung zur Seite Nr. 11
Accessories Check that all of the accessories shown below have been included with your projector. Remote control unit AAA batteries for RGB signal cable [3.0 m (N2QAEA000011 x1) remote control unit (x2) (9´10˝), K1HB15FA0001 x1] Video/Audio cable [3.0 Power coed m (9´10˝), (K2CG3FZ00008 x 1) K2KA2FA00001 x 1] Cable cover USB cable (TXFKR01VJN1 x1) (3.0 m, K1HB04FD0002 x 1) CD-ROM (TQBH9003x1) SD memory card (8 MB, (PT-L780NTU only) RP-SD008BEZ0 x1) (PT-L780NTU only) Protective case for SD memo
Inhaltszusammenfassung zur Seite Nr. 12
Precautions on handling Cautions when moving the projector Be sure to attach the lens cover before moving the projector. The projection lens is extremely susceptible to vibration and shocks. Be careful not to subject it to excessive vibration and shock when moving the projector. Cautions regarding setting-up Observe the following at all times when setting up the projector. Avoid setting up in places which are subject to vibration or shocks. If the projector is set up in locations with strong vib
Inhaltszusammenfassung zur Seite Nr. 13
About the screen If the screen you are using is dirty, damaged or discolored, attractive projections cannot be obtained. Do not apply any volatile substances to the screen, and do not let it become dirty or damaged. About the lamp The lamp may need to be replaced earlier due to variables such as a particular lamp’s characteristics, usage conditions and the installation environment, especially when it is subjected to a continuous use for more than 10 hours. About the SD memory card (PT-L780NTU on
Inhaltszusammenfassung zur Seite Nr. 14
Location and function of each part Projector # $ 0 % % & ' ( / . ) - , ' & * + #Projector control panel ,Air filter (page 16) (page 64) $Focus ring -Connector panel (pages 31 and 50) (page 18) %Air inlet ports .Power input socket (AC IN) Do not cover these ports. (page 30) The accessory power cord is &Leg adjuster buttons(L/R) connected here. (page 30) Do not use any power cord other These buttons are used to unlock than the accessory power cord. the front adjustable legs
Inhaltszusammenfassung zur Seite Nr. 15
Projector # ' & % $ #Remote control signal receptor WARNING (page 22) Do not bring your hands or other $Security lock objects close to the air outlet This can be used to connect a port. commercially-available theft- BHeated air comes out of the air prevention cable (manufactured outlet port. Do not bring your by Kensington). This security lock hands or face, or objects which is compatible with the Microsaver cannot withstand heat close to Security System from this port, otherwi
Inhaltszusammenfassung zur Seite Nr. 16
Remote control unit 4 AUTO POWER SETUP ( ) RGB LASER & 5 VIDEO MENU + PAGE 3 012 Projector control panel , $ & ' # % R-CLICK ENTER - TEMP RGB INPUT LAMP INPUT FREEZE SHUTTER POWER AUTO SETUP VIDEO RGB SHUTTER 6 * ( * 7 STANDBY(R) 8 ON(G) FUNC1 ) – FOCUS + : 9 Computer Pro jector . MENU ENTER – ZOOM + ; / +, - around it. If the temperature rises #Power indicator above a certain level, the power (pages 30, 31 and 47) supply will be turned off This indicator illuminates red when automatically
Inhaltszusammenfassung zur Seite Nr. 17
properly when using a lens that is operating mode select switch is sold separately. Refer to page 42 moved to the left (Computer). for details on correcting keystone 4Operation indicator (page 20) distortion manually. This indicator illuminates while a *SHUTTER button (page 46) laser beam is being emitted (while the LASER button is being This button is used to pressed). It flashes when any momentarily turn off the picture other buttons are being pressed. and sound. However, keystone distortion m
Inhaltszusammenfassung zur Seite Nr. 18
# $ % & ' ( ) S-VIDEO IN L DVI-D IN AUDIO OUT * USB SERIAL RGB1 IN RGB2 IN/RGB OUT R RGB AUDIO IN VIDEO IN AUDIO IN R/R-Y/PR G/Y B/B-Y/PB SYNC/HD VD REMOTE RGB3 IN + , - . (pages 26 and 27) #USB port This jack is used to output the (page 21) audio signals which are input to The remote control unit can be the projector. If audio equipment used as a personal computer is connected to this jack, no mouse by connecting the sound will be output from the projector to a personal comput
Inhaltszusammenfassung zur Seite Nr. 19
RGB signals and YPBPR signals. RGB2 or RGB3. -RGB AUDIO IN jack .VIDEO IN jack (pages 26 and 27) (page 26) Only one system is provided, so This jack is used to input video connect the appropriate signals from a video equipment connector when using RGB1, such as a video deck. (PT-L780NTU only) # Front Back ( $ ) %' & #Slot cover 'SD memory card slot Covers the card slots. When Insert the SD memory card into using an optional projector LAN here. card, replace the slot
Inhaltszusammenfassung zur Seite Nr. 20
PUSH Using the remote control unit Laser beam pointer The laser beam emitted from the remote control can be used as a pointer by pointing forward to the screen. While the LASER button is being pressed, the laser beam is being emitted and the operating indicator illuminates. Do not look into the laser emitter of the remote control unit or point the laser beam towards other people, otherwise damage to eyes may occur. N2QAEA000011 Caution BUse of controls or adjustments or performance of procedures
