Inhaltszusammenfassung zur Seite Nr. 1
Digital Projector EP755/753
User’s Guide
Inhaltszusammenfassung zur Seite Nr. 2
FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installation. Trademarks Trademarks are the rights of their respective owners.
Inhaltszusammenfassung zur Seite Nr. 3
English Table of Contents -- Usage Notice ------- Precautions ........................................................................................... 2 Introduction ------- Product Features ................................................................................... 3 ------- Package Overview ................................................................................. 4 ------- Product Overview ................................................................................... 5
Inhaltszusammenfassung zur Seite Nr. 4
English Usage Notice Warning- Do not look into the lens. The bright light may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. Warning- When changing the lamp, please allow unit to cool down, and follow all changing instructions. Warning- This product will detect the life of the lamp itself. Please be sure to change the lamp when it show
Inhaltszusammenfassung zur Seite Nr. 5
English Introduction Product Features TM This product is an XGA single chip 0.7” DLP projector. The outstanding features of it are listed as follows: True XGA, 1024 x 768 addressable pixels 6.4 lbs (2.9 kgs) compact design TM Single chip DLP technology SXGA compression and VGA, SVGA re-sizing 200 Watts user replaceable UHP lamp Mac/NEC PC-98/FM Towns compatible NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and HDTV compatible Full function remote with mouse control and laser pointer High
Inhaltszusammenfassung zur Seite Nr. 6
English Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. 2 1 Projector with lens cap Power Cord VGA Cable 3 4 5 S-Video Cable Audio Cable Jack/RCA Composite Video Cable 6 7 Remote Control with Mouse DVI to D-Sub Cable Function and Laser Pointer Remote Mouse Y Cable User’s Guide Quick Start Card Warranty Card Carrying Case Battery x 2 4
Inhaltszusammenfassung zur Seite Nr. 7
English Introduction Product Overview Main Unit 7 1 2 6 3 5 4 8 9 10 1. Panel Control 2. Power Connector & Power Switch 3. Connection Ports 4. Focus Ring 5. Zoom Lens 6. Zoom Ring 7. Speaker 8. Remote Control Receiver 9. Elevator Button 10. Elevator Foot 5
Inhaltszusammenfassung zur Seite Nr. 8
English Introduction Panel Control 2 6 1 8 3 9 4 10 11 5 7 1. Lamp Warning LED 2. Temperature Warning LED 3. Volume 4. Mute 5. Menu (On/Off) 6. Four Directional Select Keys 7. Enter 8. Zoom 9. Re-sync 10. Source 11. Power /Standby Connection Ports 5 7 9 12 1 2 3 4 6 10 11 13 8 1 RS232 Input Connector (RS232 is for after service purpose only) 2. Audio Input for Video 3. Composite Video Input Connector 4. S-Video Input Connector 5. Audio Input for DVI 6. DVI Input Connecter 7. Audio Input for
Inhaltszusammenfassung zur Seite Nr. 9
English Introduction Remote Control with Mouse Function & Laser Pointer LED Multi-Directional Selector Power / Standby Re-sync Page Down Source Laser Pointer Page Up Keystone Correction Volume ( + / - ) Zoom In / Zoom Out Mute Menu Freeze Laser Pointer Caution Enter Key Caution : To reduce the risk of injury to the eyes, do not look directly into the laser light on the remote control and do not point the laser light into anyone’s eyes. This remote control is equipped with a Class II laser that
Inhaltszusammenfassung zur Seite Nr. 10
English Installation Connecting the Projector Digital Tuner Output Video Output INPUT OUTPUT 4 1 5 MOUSE 3 RS232 6 7 RGB S-Video Output USB 1. Power Cord 2 2. VGA Cable 3. S-Video Cable 4. Audio Cable Jack/RCA 5. Composite Video Cable 6. DVI to D-Sub Cable 7. Remote Mouse Y Cable 8 8. D-Sub to RCA Cable for HDTV/Component (optional) Antenna Digital Tuner Output To ensure the projector works well with your computer, please configure the display mode
Inhaltszusammenfassung zur Seite Nr. 11
English Installation Power On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. 3. Turn on the main power switch on the side of the projector and allow the projector to warm up for 1-2 minutes. 4. Turn on the lamp by pressing “Power/Standby” button on the panel control. The startup screen will display and count down for 20 seconds and the Power/Standby indicator will light solid amber. The “LAMP” LED i
Inhaltszusammenfassung zur Seite Nr. 12
English Installation Powering Off the Projector 1. Press the “Power/Standby” button to turn off the projector lamp. 2. After pressing the “Power/Standby” button, you will see a message “Power off the lamp?” on the on-screen display. Press the “Power/ Standby” button again to confirm. Otherwise the message will disappear after 5 seconds. 3. “Power/Standby” LED indicator will light solid amber for about 30 seconds. After the “Power/Standby” indicator starts flashing, you can turn off the main powe
Inhaltszusammenfassung zur Seite Nr. 13
English Installation Adjusting the Projected Image Adjusting the Projector Height The projector is equipped with an elevator foot for adjusting the projector height. To raise the projector: 1. Press the elevator button . 2. Raise the projector to the desired display angle , then release the button to lock the elevator foot into position. 3. Use to fine-tune height adjustment. To lower the projector: 1. Press the elevator button. 2. Lower down the projector, then release the button to lock th
Inhaltszusammenfassung zur Seite Nr. 14
English Installation Adjusting the Projector Zoom / Focus You may adjust zoom ring to zoom in / out. Rotate the zoom ring counter- clockwise to zoom in and clockwise to zoom out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.7 feet to 40.7 feet (1.1m to 12.4m). Zoom Ring Focus Ring Adjusting Projection Image Size Screen Max. 28" 98" 123" 197" 246" 305" (Diagonal)M" in. 2" 2 7" 8 9" 8 1" 57 1" 97 244 Max.(WxH) 22.4" x 16.8" 78.4
Inhaltszusammenfassung zur Seite Nr. 15
English User Controls Panel Control & Remote Control There are two ways for you to control the functions: Remote Control and Panel Control. Panel Control Remote Control Power / Standby Refer to the “Power On/Off the Projector” section on page 9~10. Source Press “Source” to choose RGB, DVI-Digital, DVI-Analog, S-Video, Composite, Component and HDTV sources. Zoom Use the Panel Control When you press “Zoom” button, the zoom icon appears in the screen. Press or button to zoom in or zoom out
Inhaltszusammenfassung zur Seite Nr. 16
English User Controls Four Directional Select Keys When you close the cover of remote control, this key can be used as a mouse to control direction. The above function is only enabled with the connection between computer Page Up / Page Down : Under and projector by remote mouse Y cable. remote mouse connected status only. When the cover of remote control is opened, this key can be used for the operation for OSD display. Page Up (Computer mode only) Use this button to page up. Pag
Inhaltszusammenfassung zur Seite Nr. 17
English User Controls On-Screen Display Menus How to operate The Projector has a multilingual On-Screen Display(OSD) menus that allow you to make image adjustments and change a variety of settings. In computer source, the OSD will be the “Computer OSD”. In video source, the OSD will be the “ Video OSD”. The projector will detect the source automatically. To open the OSD menu, press the “Menu” button on the Remote Control or Panel Control. When OSD is displayed, press key to select main m
Inhaltszusammenfassung zur Seite Nr. 18
English User Controls Computer mode Language Management Image-I Image-II Audio Brightness Zoom Contrast Keystone Color Temp. Image-I (Computer mode) Brightness Adjusting the brightness of the image. Press the to darken the image. Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press the to decrease the contrast.
Inhaltszusammenfassung zur Seite Nr. 19
English User Controls Video mode Language Management Image-I Image-II Audio Brightness Tint Contrast Sharpness Color Image-I (Video mode) Brightness Adjusting the brightness of the image. Press the to darken the image. Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press the to decrease the contrast. Press the
Inhaltszusammenfassung zur Seite Nr. 20
English User Controls Computer mode Language Management Image-I Image-II Audio Frequency H. Position Tracking V. Position 16:9 / 4:3 Reset Image-II (Computer mode) Yes No Frequency “Frequency” is for changing the display data frequency to match the frequency of your computer’s graphic card. When you experience a vertical flickering bar, use this function to make an adjustment. Tracking Choose “Tracking” item to synchronize the signal timing of the display with that of the graphic card. When you
