Inhaltszusammenfassung zur Seite Nr. 1
High Light Output Projection System • Großbildschirm Projektions-System
XT9000
User’s Manual • Bedienungshandbuch
Inhaltszusammenfassung zur Seite Nr. 2
XT9000 High Light Output Projection System User’s Manual
Inhaltszusammenfassung zur Seite Nr. 3
Precautions: Please read this manual carefully before using your CAUTION: To turn off main power, be sure to remove the plug from NEC XT9000 Projector and keep the manual handy for future refer- power outlet. The power outlet socket should be installed as near to ence. the equipment as possible, and should be easily accessible. WARNING 3. GSGV Acoustic Noise Information Ordinance: This is a Class A product. In a domestic environment this product may The sound pressure level is less than 70 dB(A)
Inhaltszusammenfassung zur Seite Nr. 4
Fire and Shock Precautions Important Safeguards 1. Ensure that there is sufficient ventilation and that vents are unob- These safety instructions are to ensure the long life of your projector structed to prevent potentially dangerous concentrations of ozone and to prevent fire and shock. Please read them carefully and heed all and the build-up of heat inside your projector. Allow at least 8 inches warnings. (20cm) of space between your projector and a wall. Allow at least 20 inches (50 cm) of sp
Inhaltszusammenfassung zur Seite Nr. 5
Précautions contre l'incendie ou la décharge Recommandations importantes 1. S'assurer qu'il y ait une ventilation suffisante et que les ouvertures Ces instructions de sécurité ont pour but d'assurer une longue vie à ne soient pas obstruées afin d'éviter des concentrations votre projecteur et d'éviter un incendie ou une décharge électrique. Prière potentiellement dangereuses d'ozone et l'accumulation de chaleur à de les lire avec attention et de tenir compte de tous les avertissements. l'intérieu
Inhaltszusammenfassung zur Seite Nr. 6
LIMITED WARRANTY (USA and Canada only) NEC Technologies, Inc.(hereafter NECTECH) warrants this product to LIMITATION OF IMPLIED WARRANTIES be free from defects in material and workmanship under the following All implied warranties, including warranties of merchantability and fit- terms. ness for a particular purpose, are limited in duration to the length of this warranty. HOW LONG IS THE WARRANTY Parts and labor are warranted for (1) One Year from the date of the first EXCLUSION OF DAMAGES cus
Inhaltszusammenfassung zur Seite Nr. 7
TABLE OF CONTENTS Video Adj ........................................................................ E-31 INTRODUCTION Noise Reduction ...................................................... E-31 Introduction to the XT9000 Projector ..................................... E-1 Color Matrix ............................................................. E-32 Getting Started ....................................................................... E-1 Y/C Delay.............................................
Inhaltszusammenfassung zur Seite Nr. 8
INTRODUCTION This section introduces you to your new XT9000 Projector, provides a Getting Started list of materials that comes with your projector and describes the fea- The fastest way to get started is to take your time and do everything tures and controls. right the first time. Taking a few minutes now to review the manual may save you hours later on. At the beginning of each section of the manual Introduction to the XT9000 Projector you'll find an overview. If the section doesn't apply, you
Inhaltszusammenfassung zur Seite Nr. 9
1. Part Names and Functions Stacking Pad (4 pcs) Ventilation (out) Remote Sensor PC Card Slot Insert a PC memory card here to upgrade the projector system software or copy data. To access the slot, loosen the screw. AC INPUT Connect the supplied power cable here (AC 200-240V). Foot Power Switch (Main power)* Input Terminal Panel Lens (Optional) Carrying Handle * To turn on the main power to the projector, press the switch to the ON position (I) and the POWER indicator on the rear panel will turn
Inhaltszusammenfassung zur Seite Nr. 10
Controls Remote sensor 11 10 9 8 7 5 4 2 LENS SHIFT FOCUS ZOOM MENU SELECT ENTER INDICATOR POWER ON ON/OFF - + OFF STATUS CANCEL 6 3 1 1. Power Button 6. Cancel Button Press to turn the projector on when the projector is in the standby con- Press this button to exit the menu. Press this button to return the adjust- dition (Main Power switch must be on and the POWER indicator lit or- ments to the last condition while you are in the adjustment or setting ange). Press and hold for 2 seconds to turn
Inhaltszusammenfassung zur Seite Nr. 11
aaaaaaaaaa aaaaaaa Terminal Panel aaaaaaaaaaaaa aaaaaaaaaaa 5 RGB DIGITAL OUTPUT INPUT9 6 INPUT3 INPUT2 INPUT1 INPUT4 7 RGB R/Cr R/Cr Cr 1 OUTPUT G/Y G/Y Y OPTION IN B/Cb B/Cb Cb SDI For the optional XT SDI board. 2 OUT H/HV H/HV INPUT0 REMOTE1 V V 8 3 S-VIDEO1 INPUT5 INPUT6 9 REMOTE2 Y VIDEO1 VIDEO2 IN C 4 OUT S-VIDEO2 10 INPUT7 INPUT8 REMOTE3 OUT IN 11 LED ON 12 OFF 13 E – 4
Inhaltszusammenfassung zur Seite Nr. 12
1. INPUT 3 RGB Connector (Mini D-Sub 15 pin) 7. INPUT 4 Y/Cb/Cr Terminal (RCA) Connect your PC or other analog RGB equipment such as a high-defi- Connect component video outputs (Y/Cb/Cr, Y/Pb/Pr) of the external nition document camera. equipment such as DVD player. This connector accepts RGB signals only. NOTE: This terminal accepts component signals only. Not compatible with component signals. 8. INPUT 5 VIDEO 1 Terminal (BNC) 2. Option Connector (Mini D-Sub 9 pin) Connect to the BNC video out
Inhaltszusammenfassung zur Seite Nr. 13
7 ADJUST PICTURE Remote Control Press to display the Picture adjustment screen. Pressing this button sequentially selects "Brightness" → "Contrast" → "Saturation" → "Color" → "Hue" → "Sharpness" → "V-Aperture" → "Gamma Correction". 27 8 IMAGE/PROJECTOR Press to display the Image Option screen. Pressing this button sequen- 2 tially selects "Pixel Adjust" → "Position" → "Aspect Ratio" → "Resolu- tion" → "Overscan" → "Video Filter" → "Blanking". POWER INPUT ON OFF 1 ABC 2 DEF 3 GHI While pressing a
Inhaltszusammenfassung zur Seite Nr. 14
19 MUTE OSD Remote Control Precautions Press to turn off the on-screen display. Press again to restore the on- • Use the remote control within a distance of about 7m (23feet) and at screen display. an angle of 30˚ above, below, to the left and to the right of the remote control sensor located at the front of the main unit. NOTE: You can also turn off the on-screen display by pressing and holding CTL and then pressing MUTE OSD; doing this again restores it. In this case any • The remote control s
Inhaltszusammenfassung zur Seite Nr. 15
2. INSTALLATION This section describes how to set up your projector and how to connect Screen Size and Projection Distance video and audio sources. Applicable lens and throw distance/ List of screen sizes Setting Up Your Projector Your Projector is simple to set up and use. But before you get started, you must first: 1. Determine the image size 2. Set up a screen or select a non-glossy white wall onto which you can Height Screen size (Diagonal) project your image. (V) 3. Install the optional len
Inhaltszusammenfassung zur Seite Nr. 16
Lens Shift Adjustable Range Lens Shift Adjustable Range for Desktop and Ceiling Mount Application The diagram below shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown using the normal projection position as a starting point. Maximum Possible Range for TL-1ZH, TL-2Z and TL-4Z Parenthesized values for the ceiling mount application Up: 0.5 V (0.32 V) Right: 0.3 H (0.23 H) Down: 0.32 V (0.5 V) Left: 0.23 H (0.3 H) (H: width of projected imag
Inhaltszusammenfassung zur Seite Nr. 17
Moving The Projector Selecting A Location Always carry your projector by the handle. Ensure that the power cable The further your projector is from the screen or wall, the larger the im- and any other cables connecting to video sources are disconnected age. The minimum size the image can be projected is 80" (2 m) mea- and the lens is removed from the projector before moving the projector. sured diagonally. The largest the image can be is 500" (12.7 m). When moving the projector or when it is not
Inhaltszusammenfassung zur Seite Nr. 18
ON POWER OFF ON POWER OFF 3. SETUP Connecting the Power Cable and Turning on the Projector Before you turn on your projector, ensure that the computer or video source is turned on and that your lens cap is removed. 1. Connect the supplied power cable to the projector. Plug the supplied power cable into the AC outlet. To the wall outlet Open the cover of the power cable to plug fully into the AC IN on the projector. 2. Turn On The Projector [POWER] switch The main power switch is on the front pan
Inhaltszusammenfassung zur Seite Nr. 19
(2) Press and hold the CTL and press the ZOOM + or - button to adjust the Set up the projector image size optically. You can also adjust the image size by using the ZOOM + or - button on the projector cabinet. 1. Turn on the projector The zoom function processes a signal digitally. For this reason, the zoom 2. Select your type of projection: buttons on the remote control and the projector cabinet are not available Desktop front, ceiling rear, desktop rear, and ceiling front. for HDTV, Video, S-
Inhaltszusammenfassung zur Seite Nr. 20
2) Hookup Keystone 2-1. Use the supplied DVI-D cable to connect the RGB DIGITAL output of the master projector to the RGB DIGITAL input (INPUT9 )of the slave projector until all the projectors are connected. Keystone distortion Normal 2-2. Next, using a commercially available, bi-directional RS-232C cable connect the OPTION OUT terminal of the master projector to the OPTION IN terminal of the slave projector until all the projectors are connected. 2-3. Turn all the projectors on and roughly make
