Inhaltszusammenfassung zur Seite Nr. 1
LCD
Projector
User Manual
SA51
MODEL LVP-SA51U
EN – 1
ESPAÑOL ITALIANO DEUTSCH FRANÇAIS ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equi
Inhaltszusammenfassung zur Seite Nr. 3
Contents Important safeguards ...........................................................................4 Overview ............................................................................................... 6 Using the remote control ......................................................................8 Battery installation ......................................................................................................... 8 Installation ...............................................
Inhaltszusammenfassung zur Seite Nr. 4
Important safeguards Please read all these instructions regarding your LCD 10. Power sources This projector should be operated only from the projector and retain them for future reference. Follow type of power source indicated on the marking all warnings and instructions marked on the LCD pro- label. If you are not sure of the type of power, jector. please consult your appliance dealer or local power company. 1. Read instructions All the safety and operating instructions should 11. Power-cord pr
Inhaltszusammenfassung zur Seite Nr. 5
WARNING: Do not touch Air outlet grill and Unplug immediately if there is Bottom plate which become hot. something wrong with your projector. Do not touch them or put other equipment in front of Do not operate if smoke, strange noise or odor comes Air outlet grill. The heated Air outlet grill and Bot- out of your projector. It might cause fire or electric tom plate may cause injury or damage to other equip- shock. In this case, unplug immediately and contact ment. Also, do not set the projector
Inhaltszusammenfassung zur Seite Nr. 6
Overview 10 9 7 6 5 8 1 Air inlet grill (Front) 2 Front height adjuster button 3 Air inlet grill (Side) 4 Terminal board 5 Speaker 6 Remote control sensor (Front) 7 Zoom ring 8 Focus ring 9 Control panel 10 Lens 11 Kensington Security Lock Standard connec- tor 14 2 3 12 Remote control sensor (Rear) 13 Air outlet grill 12 13 11 Control panel 1 LAMP indicator 2 TEMP (temperature) indicator 3 + , – (VOLUME) button 12 11 10 9 8 4 VIDEO button 5 MENU button AUTO POSITION 6 ENTER button POWER MUTE 7 D
Inhaltszusammenfassung zur Seite Nr. 7
Bottom side 3 1 Adjustment foot (right and left) 2 Lamp cover 3 Adjustment foot (up and down) Caution: Do not replace the lamp right after using the projector. The lamp will be very hot. 2 1 1 COMPUTER button Remote control 2 MENU button 11 3 AUTO POSITION button 4 STILL button POWER V 5 + , – (VOLUME) buttons 10 VIDEO 1 C 6 MUTE (Audio/Video) button COMPUTER 9 7 EXPAND button 2 MENU 8 ENTER button ENTER 8 9 Direction buttons 10 POWER button 7 AUTO EXPAND MUTE POSITION 11 VIDEO button 3 6 STILL
Inhaltszusammenfassung zur Seite Nr. 8
Using the remote control Battery installation Use two AAA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from - spring side, and make sure to set them tightly. 3. Replace the back cover. 12 3 Important: • Do not combine a new battery with an old one. • Load batteries in the correct position. • Do not
Inhaltszusammenfassung zur Seite Nr. 9
H Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance be- tween the projector and screen: Width Multiply the width of the screen screen A B X 1.8 (min.) , Multiply the width of the screen X 3.1 (max.). • Refer to the chart for recommended Screen distances in maximum zoom and minimum zoom. A=B (between the screen and L the head of the projector) Distance from scre
Inhaltszusammenfassung zur Seite Nr. 10
Basic connections This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the AC power cord. • If connected units are set too close to one another, the image may be affected. • Refer to the user manual of each component for details of connections. Projector + AV equipment Important: • Match the color of video and audio p
Inhaltszusammenfassung zur Seite Nr. 11
Projector + Personal computer RGB cable for PC to COMPUTER IN (Mini D-SUB 15P) computer MAIN S-VIDEO COMPUTER OUT COMPUTER IN RS-232C VIDEO IN VIDEO AUDIO L (MONO) AUDIO R AC IN to monitor port to COMPUTER OUT to AUDIO IN AUDIO OUT to PC audio MONITOR OUTPUT output PC audio cable (option) RGB cable for PC (option) When outputting to both a PC monitor and the projector. Important: • Connectors or analog RGB output adapters may be necessary depending on the PC connected to this projector. Ple
Inhaltszusammenfassung zur Seite Nr. 12
Preparing the projector for operation Getting ready for projection Adjusting the angle of projection 1. Connect the power cord provided to the projector. For the best result, project onto a flat screen with a 90 2. Connect the power cord to the wall power outlet. degree angle to the floor. If necessary, tilt the projector 3. Remove the lens cap. by adjusting two foot adjustments on the bottom of the projector. Warning: • Do not look directly into the lens when projector is “ON”. • The lens cap i
Inhaltszusammenfassung zur Seite Nr. 13
To operate projector power ON 2 • 9 MAIN S-VIDEO COMPUTER OUT COMPUTER IN RS-232C VIDEO IN VIDEO 4 AUDIO L (MONO) POWER V AUDIO R VIDEO C AC IN 3 • 7 • 8 4 COMPUTER MENU ENTER AUTO POSITION button 3 • 7 • 8 4 MUTE button AUTO AUTO POSITION EXPAND MUTE POSITION AUTO POSITION MUTE button POWER MUTE STILL button COMPUTER VOLUME LAMP SOURCE VIDEO VOLUME STILL button TEMP MENU ENTER 1. Turn on the equipment connected to the projector. • When the lamp indicator is blinking red, the the lamp should
Inhaltszusammenfassung zur Seite Nr. 14
To operate projector power ON (Continue) The volume from the speaker Turning off the projector Press the volume + or – button to change the volume 7. Press the POWER button. from the speaker. The message “POWER OFF? YES : PRESS AGAIN” The volume control bar will appear on the screen. appears on the screen. • To exit from this mode, press any button except POWER, LASER, mouse pointer, R/L-click, 30 STILL and VOLUME + and - buttons. 8. Press the POWER button again. • The volume control bar will d
Inhaltszusammenfassung zur Seite Nr. 15
Menu operation IMAGE CONTRAST ± 30 BRIGHTNESS ± 30 RED ± 30 COLOR MATRIX 1 YELLOW ± 30 2 GREEN ± 30 3 CYAN ± 30 USER USER BLUE ± 30 OFF MAGENTA ± 30 COLOR TEMP. STANDARD CONTRAST R ± 30 HIGH CONTRAST B ± 30 LOW BRIGHTNESS R ± 30 USER BRIGHTNESS B ± 30 SHARPNESS ± 10 TINT ± 10 (Displays only when the source is selected to VIDEO) COLOR ± 10 (Displays only when the source is selected to VIDEO) INSTALLATION AUTO POWER ON ON, OFF AUTO POWER OFF OFF, 5, 10, 15, 30, 60 min IMAGE REVERSE OFF, MIRROR, IN
Inhaltszusammenfassung zur Seite Nr. 16
Menu operation (continued) 1 IMAGE Opt CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher XGA60 as the number increases. IMAGE BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as CONTRAST 0 the number increases. BRIGHTNESS 0 COLOR MATRIX. ...... Adjusts color balance in each color of the image. See page COLOR MATRIX USER 18. COLOR TEMP. STANDARD COLOR TEMP... . Adjusts color temperature. See page 18. SHARPNESS 0 SHARPNESS ...... Adjusts the picture sh
Inhaltszusammenfassung zur Seite Nr. 17
4 SIGNAL MEMORY CALL ........Use to select AUTO, USER 1 or USER 2. See below. Opt XGA60 HORIZ. POSITION .... Use to adjust the horizontal position of the image. SIGNAL VERT. POSITION .....Use to adjust the vertical position of the image. A MEMORY CALL AUTO U FINE SYNC. ....... Use to synchronize the projector with PC input signals so HORIZ. POSITION 0 that the image is not blurred. VERT. POSITION 0 TRACKING ......... Use to avoid image noise such as wide stripes. FINE SYNC. 0 COMPUTER INPUT ....
Inhaltszusammenfassung zur Seite Nr. 18
Picture adjustment Adjusting the image 6. Repeat steps 4 and 5 for more adjusting. You can adjust the picture by using the IMAGE menu. 7. Exit the menu system by pressing the MENU but- ton several times. Opt XGA60 • When using the setting which has been already IMAGE prepared, select 1 (for VIDEO input), 2 (for images CONTRAST 0 with high color temperature) or 3 (for COMPUTER BRIGHTNESS 0 input) in step 3. COLOR MATRIX USER • When not using Color matrix adjustment, select COLOR TEMP. STANDARD OF
Inhaltszusammenfassung zur Seite Nr. 19
Noise etc. appears on top or bottom part of image : Adjustment from personal computer Adjust SHUTTER (U), SHUTTER (L) or VERT. Although this projector sets proper signal systems LINES of the menu in SIGNAL - USER menu. automatically for the image signal from personal computers, it cannot be applied to some of personal Noise etc. appears on left or right side of image : computers. In this case, press the AUTO POSITION Adjust SHUTTER (LS) or SHUTTER (RS) of the button. If the images are still no
Inhaltszusammenfassung zur Seite Nr. 20
Picture adjustment (continued) Specification of RGB signals in each computer mode of the projector Signal mode resolution horizontal Vertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60 – 15.73 59.94 800 x 600 – TV50 – 15.63 50.00 800 x 600 – 1080i – 33.75 60.00 800 x 450 – 720p – 45.00 60.00 800 x 450 – PC98 640 x 400 24.82 56.42 800 x 500 640 x 400 CGA70 640 x 400 31.47 70.09 800 x 500 640 x 400 CGA84 640 x 400 37.86 84.14 800 x 500 640 x 400 CGA85 640 x
