Inhaltszusammenfassung zur Seite Nr. 1
DLP Projector
XD500U/XD500U-G/XD500U-ST/XD510U/SD510U/XD510U-G
XD520U/XD520U-G/EX51U/EX52U
Controlling the projector using a personal computer
This projector can be controlled by connecting a personal computer with RS-232C terminal.
PC-controllable functions :
•Turning the power ON or OFF
• Changing input signals
• Inputting commands by pressing the buttons on the control panel and remote control
• Menu setting
Connection
Important:
• Make sure that your computer and projector are turned off bef
Inhaltszusammenfassung zur Seite Nr. 2
3) Control sequence (1) Send the command from the personal computer to the projector. (2) The projector will send a return command after it receives an end code. If the command is not received cor- rectly, the projector will not send the return command. (3) The personal computer checks the command and confirms if the sent command has been executed or not. (4) This projector sends various codes other than the return code. When having a control sequence by RS-232C, reject other codes from the pers
Inhaltszusammenfassung zur Seite Nr. 3
6) Keystone commands (Not executable in stand-by mode. Possible only to read during muting.) The keystone commands are used for the keystone setting of this projector with the value. The value will vary depending on the installation conditions, etc.) ITEM ASCII HEX VALUE KEYSTONE(vertical) KS 4Bh 53h ±20 How to set the value Use the ASCII or HEX code as shown below to set the value. ASCII '+' '–' '0' '1' '2' '3' '4' '5' '6' '7' '8' '9' HEX 2Bh 2Dh 30h 31h 32h 33h 34h 35h 36h 37h 38h 39h 7) Mut
Inhaltszusammenfassung zur Seite Nr. 4
[Example] When enabling the password lock of DISPLAY INPUT (in the case that the password is 123412): Sending commands Status code from Description from the PC, etc. the projector 30 30 50 53 4C 4F 43 4B 31 31 32 33 34 31 32 0D Command for enabling the '0' '0' 'P' 'S' 'L' 'O' 'C' 'K' '1' '1' '2' '3' '4' '1' '2' ' ' password lock of DISPLAY INPUT 30 30 50 53 4C 4F 43 4B 31 31 32 33 34 31 32 31 0D Response informing that the '0' '0' 'P' 'S' 'L' 'O' 'C' 'K' '1' '1' '2' '3' '4' '1' '2' '1' ' ' proje
Inhaltszusammenfassung zur Seite Nr. 5
ITEM ASCII HEX VALUE WALL SCREEN WS 57h 53h 0 (OFF), 1 (BEIGE), 2 (LIGHT BLUE), 3 (LIGHT GREEN), 4 (PINK), 5 (BLACK BOARD), 6 (WHITE BOARD) WALL SCREEN (BEIGE) WSY 57h 53h 59h 1 - 5 WALL SCREEN (LIGHT BLUE) WSB 57h 53h 42h 1 - 5 WALL SCREEN (LIGHT GREEN) WSG 57h 53h 47h 1 - 5 WALL SCREEN (PINK) WSP 57h 53h 50h 1 - 5 LAMP MODE LM 4Ch 4Dh 0 (STANDARD), 1 (LOW) AUTO POWERON APON 41h 50h 4Fh 4Eh 0 (OFF), 1 (ON) AUTO POWER OFF APOF 41h 50h 4Fh 46h 00 (OFF), 05, 10, 15, 30, 60 SPLASH SCREEN SS 53h 53h
Inhaltszusammenfassung zur Seite Nr. 6
[Example 2] When setting the CONTRAST R of the COLOR TEMP.-USER to +10, the CONTRAST G to 0, and the CONTRAST B to -5. (Figures and symbols enclosed in quotation marks are ASCII codes.): Sending commands Status code from Description from the PC, etc. the projector 30 30 50 2B 31 30 2B 30 30 2D 30 35 0D Command for setting the '0' '0' 'P' '+' '1' '0' '+' '0' '0' '-' '0' '5' ' ' picture control 30 30 50 2B 31 30 2B 30 30 2D 30 35 0D Command receipt confirmation '0' '0' 'P' '+' '1' '0' '+' '0' '0'
