Inhaltszusammenfassung zur Seite Nr. 1
TABLE OF CONTENTS
Safety Summary iii
Introduction 1
Image Resolution 1
Compatibility 2
Unpacking the Projector 2
Usage Guidelines 5
If You Need Assistance 5
Warranty 5
Setting up the Projector 7
Connecting the CableWizard™ to the Projector 8
Selecting Connectors on the CableWizard 8
Preparing to Connect Your Equipment to the Projector 10
Connecting an IBM-Compatible Laptop Computer 11
Connecting an IBM-Compatible Desktop Computer 13
Connecting an Apple PowerBook Computer 15
Connecting a Macintos
Inhaltszusammenfassung zur Seite Nr. 2
Ta b l e o f C o n t e n t s Maintenance & Troubleshooting 39 Cleaning the Lens 39 Cleaning the Fan Intake Filter 39 Replacing the Projection Lamp 41 Replacing the Batteries in the Remote Control 43 Using the Kensington Lock 43 Troubleshooting 44 Solutions to Common Problems 45 Appendix 49 Specifications 49 Accessories 51 Portable and Laptop Activation Chart 53 Using Video Mirroring with a PowerBook Computer 57 Projected Image Size 58 Index 61 ii
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY SUMMARY Please read these instructions carefully before using your projec- tor. Failure to comply with them could result in fire, electrical shock, personal injury or damage to equipment. These graphics are used throughout this manual to draw your attention to important information about the projectors. NOTE: Additional useful details or tips. CAUTION: Steps to take to avoid damage to your equipment. WARNING: Steps to take to avoid personal injury. These graphics are used on the proj
Inhaltszusammenfassung zur Seite Nr. 4
Sa fet y Su mmar y Grounding The projector is grounded through the grounding conductor on the power cord. To avoid electric shock, plug the power cord into a properly wired receptacle. Do not defeat the purpose of the grounding-type plug. Lamp To avoid overheating and unacceptable image quality, replace the projection lamp with a lamp of the specified type. Refer to page 49 for lamp specifications and to page 41 for instructions on replacing the lamp. Lamp Compartment To avoid burns, do no
Inhaltszusammenfassung zur Seite Nr. 5
INTRODUCTION ® The In Focus LP™ 725 and 735 lightweight multimedia projec- tors combine powerful and sophisticated features with easy-to- use, intuitive controls. Built-in multimedia features include audio, a palette of 16.7 million colors and active matrix liquid crystal display (LCD) technology. The 700 series projectors are ideal for high-performance business, training and imaging appli- cations that demand exceptional color quality. The 725 has SVGA 800x600 graphics, the 735 has XGA 1024
Inhaltszusammenfassung zur Seite Nr. 6
In tr o d uc ti on Compatibility The projector is compatible with a wide variety of computers and video devices, including: • IBM-compatible computers, including laptops, up to 1024x768 resolution (LP 725) or 1280x1024 resolution (LP 735) at 75 Hz. NOTE: Selected workstations are also supported. Contact your In • Apple Macintosh and PowerBook computers up to 1024x768 resolution (LP 725) or 1280x1024 resolution (LP 735). Focus dealer for details. • Most standard VCRs, camcorders and laser disc
Inhaltszusammenfassung zur Seite Nr. 7
2 3 1 4 6 5 8 7 9 FIGURE 1 Shipping box contents 1. LP 725 or 735 projector 6. CableWizard 2. LP 725/735 User’s Guide 7. CableWizard computer cable 3. power cord 8. CableWizard mouse cable 4. remote and batteries 9. CableWizard audio cable 5. RCA audio/video (A/V) cable Not shown: Quick Start card, online user guide CD-ROM, lens cap 3
Inhaltszusammenfassung zur Seite Nr. 8
In tr o d uc ti on speaker connector panel elevator button FIGURE 2 Side view of projector remote control power receiver switch power cord focus ring connector zoom ring FIGURE 3 Front view of projector 4
Inhaltszusammenfassung zur Seite Nr. 9
Usage Guidelines • Do not look directly into the projection lens when the projector is turned on. The bright light may harm your eyes. • Do not block the grills on the projector. Do not place the projec- tor on cloth table coverings, as they may get sucked up to the NOTE: If the projector overheats vents. Restricting the air flow can cause it to overheat and turn and turns off, you must wait about off. 30 seconds before you attempt to • Handle the projector as you would any product with gl
Inhaltszusammenfassung zur Seite Nr. 10
25 ft. 5 ft. 2.5 ft. SETTING UP THE PROJECTOR 1 Place the projector on a flat surface. • The projector must be within 10 feet (3 m) of your power source and within 10 feet of your computer. • If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” NOTE: An optional extension on page 38 to reverse the image. cable, sold separately, lets you • If you are installing the projector on the ceiling, refer to the increase the distance
Inhaltszusammenfassung zur Seite Nr. 11
S e tti ng up t h e Pr oj ec to r Connecting the CableWizard™II to the Projector The CableWizard II (referred to as “CableWizard” in this manual for brevity) simplifies the connection process by providing a cen- CAUTION: Turn off the tral hub for all the connections between the projector and your computer, monitor and projector computer. The connectors on the CableWizard are labeled with whenever you connect or icons. disconnect cables. Connect the end of the CableWizard cable to the conne
Inhaltszusammenfassung zur Seite Nr. 12
• If you’re connecting an IBM-compatible desktop or laptop com- puter, turn the selector until the window displays “PC.” computer monitor NOTE: The serial connector is mouse provided for use with a command center for a fixed installation. serial audio FIGURE 7 Selecting the IBM-compatible connectors on the CableWizard • If you’re connecting a Macintosh desktop or an Apple PowerBook computer, turn the selector until the window displays “Mac™.” monitor computer mouse audio FIGURE 8 Selecting th
Inhaltszusammenfassung zur Seite Nr. 13
S e tti ng up t h e Pr oj ec to r Preparing to Connect Your Equipment to the Projector Now you’re ready to connect your equipment. Computers are connected to the CableWizard. Video players and other equip- NOTE: Before you continue, ment, such as external speakers, are connected directly to the pro- make sure the projector and your jector. equipment are turned off. If you’re Steps for connecting the different types of equipment are given connecting a computer, make sure on the pages listed bel
Inhaltszusammenfassung zur Seite Nr. 14
Connecting an IBM-Compatible Laptop Computer 1 Plug the end of the CableWizard computer cable into the video connector on your computer. 2 Plug the end of the CableWizard computer cable into the NOTE: Many laptop computers connector on the CableWizard. do not automatically turn on their external video port when a sec- ondary display device such as a projector is connected. Refer to your computer manual for the command that activates the exter- nal video port. Activation com- mands for
Inhaltszusammenfassung zur Seite Nr. 15
S e tti ng up t h e Pr oj ec to r Do you want to control the computer’s mouse from the projector’s remote or keypad? 1 Locate the mouse cable and unplug it from your computer. Plug the end of the CableWizard mouse cable into the 2 mouse connector on your computer. NOTE: Most laptop computers do not allow you to use the 3 Plug the end of the CableWizard mouse cable into the computer’s pointing device and the connector on the CableWizard. projector’s remote at the same time. mouse cable com
Inhaltszusammenfassung zur Seite Nr. 16
Connecting an IBM-Compatible Desktop Computer 1 Locate the cable that connects your monitor to your computer. Unplug it from the computer. 2 Plug the end of the CableWizard computer cable into the monitor connector on your computer. 3 Plug the end of the computer cable into the connector on the CableWizard. computer cable FIGURE 12 Connecting the CableWizard computer cable to an IBM-compatible desktop computer Do you want to display the image on your computer’s monitor as well as on the p
Inhaltszusammenfassung zur Seite Nr. 17
S e tti ng up t h e Pr oj ec to r Do you want to control your computer’s mouse from the projector’s remote or keypad? Unplug the mouse cable from your computer. 1 2 Plug the end of the CableWizard mouse cable into the mouse connector on your computer. NOTE: You cannot use your computer’s mouse and the 3 Plug the end of the CableWizard mouse cable into the projector’s remote at the same connector on the CableWizard. time. monitor cable mouse cable computer cable audio cable FIGURE 13 Connec
Inhaltszusammenfassung zur Seite Nr. 18
Connecting an Apple PowerBook Computer Plug the end of the CableWizard computer cable into the 1 video connector on your PowerBook. 2 Plug the end of the CableWizard computer cable into the NOTE: Some PowerBooks require connector on the CableWizard. the Apple-supplied video-out cable 3 If you want the projector display to be the same as the Power- for external video. Connect it Book’s screen display, turn on video mirroring. (See “Using Video Mirroring with a PowerBook Computer” on page
Inhaltszusammenfassung zur Seite Nr. 19
S e tti ng up t h e Pr oj ec to r Do you want to control the computer’s mouse from the projector’s remote or keypad? 1 Locate the mouse cable and unplug it from your PowerBook. Plug the end of the CableWizard mouse cable into the 2 (ADB) connector on your PowerBook. NOTE: Most laptop computers do not allow you to use the 3 Plug the end of the CableWizard mouse cable into the computer’s pointing device and the connector on the CableWizard. projector’s remote at the same time. mouse cable c
Inhaltszusammenfassung zur Seite Nr. 20
Connecting a Macintosh Desktop Computer 1 Locate the cable that connects the monitor to your computer. Unplug it from the computer. 2 Plug the end of the CableWizard computer cable into the monitor connector on your computer. 3 Plug the end of the CableWizard computer cable into the connector on the CableWizard. computer cable FIGURE 16 Connecting the CableWizard computer cable to a Macintosh desktop computer Do you want to display the image on your computer’s monitor as well as on the pr
