Inhaltszusammenfassung zur Seite Nr. 1
USER’S
GUIDE
Inhaltszusammenfassung zur Seite Nr. 2
User’s Guide
Inhaltszusammenfassung zur Seite Nr. 3
Copyright © 1996 by In Focus Systems, Inc. Wilsonville, Oregon. All rights reserved.
Inhaltszusammenfassung zur Seite Nr. 4
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installa- tion. DOC (Canada) This Class B digital apparatus meets all requirements of the Canadian Interfer- ence-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouil
Inhaltszusammenfassung zur Seite Nr. 5
Declaration of Conformity Manufacturer: In Focus Systems, Inc. 27700B SW Parkway Ave. Wilsonville, Oregon 97070 USA European Office: Plantenweg 91, 2132 HL Hoofddorp, The Netherlands We declare under our sole responsibility that the LitePro 210 and 220 LCD Projec- tors conform to the following directives and norms: Directive 89/336/EEC EMI: EN 55022 (1992) Class B EMC: EN 50082-1 (1992) IEC 801-2, IEC 801-3, IEC 801-4 Directive 73/23/EEC Safety: EN 60950: 1992 + A1 + A2 + A3: 1995 May, 1996
Inhaltszusammenfassung zur Seite Nr. 6
TABLE OF CONTENTS Safety Summary iii Introduction 1 Image Resolution 1 Compatibility 2 Unpacking the Projector 2 Usage Guidelines 4 If You Need Assistance 4 Warranty 4 Setting up the Projector 5 Connecting the CableWizard to the Projector 6 Selecting Connectors on the CableWizard 6 Preparing to Connect Your Equipment to the Projector 8 Connecting an IBM-Compatible Desktop Computer 9 Connecting an IBM-Compatible Laptop Computer 11 Connecting a Macintosh Desktop Computer 13 Connecting an Apple Pow
Inhaltszusammenfassung zur Seite Nr. 7
Ta b l e o f C o n t e n t s Maintenance 41 Cleaning the Lens 41 Removing and Replacing a Lens 41 Using the Zoom Lens 42 Replacing the Projection Lamp 43 Resetting the Lamp Monitor Light 44 Replacing the Batteries in the Remote Control 45 Replacing the Fuse 45 Using the Kensington Lock 47 Troubleshooting 49 Solutions to Common Problems 50 Appendix 55 Specifications 55 Accessories 57 Portable and Laptop Activation Chart 59 Using Video Mirroring with a PowerBook Computer 63 Projected Image Size 64
Inhaltszusammenfassung zur Seite Nr. 8
SAFETY SUMMARY Please read these instructions carefully before using your LitePro 210 or 220. Failure to comply with them could result in fire, elec- trical shock, personal injury or damage to equipment. These graphics are used throughout this manual to draw your attention to important information about the projectors. NOTE: Additional useful details or tips. CAUTION: Steps to take to avoid damage to your equipment. WARNING: Steps to take to avoid personal injury. These graphics are used on
Inhaltszusammenfassung zur Seite Nr. 9
Sa f e t y S u m m a r y Power Source Use only a three-wire grounding type power source. The power source should not exceed 250 volts rms between the supply con- ductors or between either conductor and the ground. Power Cord Use only the power cord that was shipped with the LitePro. Although other power cords might be similar in appearance, they have not been safety-tested with the 210 or 220. Do not use a power cord if it has become damaged or frayed. Contact your In Focus dealer or call I
Inhaltszusammenfassung zur Seite Nr. 10
Hot Surfaces Allow the projector to cool at least 45 minutes before replacing a lamp. When you open the lamp housing, be very careful not to touch the hot surfaces inside. Ventilation and Overheating Openings in the projector case provide ventilation to protect it from overheating. Keep loose papers and other objects well away from the bottom, top and side grills. Do not place the projector on top of or close to a computer or other heat-producing equipment. Liquid Spills Do not set drinks o
Inhaltszusammenfassung zur Seite Nr. 11
Introduction
Inhaltszusammenfassung zur Seite Nr. 12
INTRODUCTION ® The In Focus Systems LitePro 210 and 220 multimedia projec- tors combine powerful and sophisticated features with easy-to- use, intuitive controls. Built-in multimedia features include audio by JBL™, a palette of 16.7 million colors and active matrix liquid crystal display (LCD) technology. The 200 series projectors are ideal for high-performance business, training and imaging appli- cations that demand exceptional color quality. The 210 has VGA graphics, the 220 has SVGA grap
Inhaltszusammenfassung zur Seite Nr. 13
In t r o d u ct i o n Compatibility The projector is compatible with a wide variety of computers and video devices, including: • IBM-compatible computers, including laptops, up to 800x600 resolution (LitePro 210) or 1024x768 resolution (LitePro 220) at 75Hz. • IBM PS/2 in VGA and MCGA modes. • Apple Macintosh and PowerBook computers up to 800x600 resolution (LitePro 210) or 1024x768 resolution (LitePro 220). • Various VCRs, camcorders and laser disc players. The projector is not compatible w
Inhaltszusammenfassung zur Seite Nr. 14
2 1 3 7 4 9 6 5 8 10 FIGURE 1 Shipping box contents 1. LitePro 210 or 220 projector 6. RCA audio/video (A/V) cable 2. LitePro 210/220 User’s Guide 7. CableWizard 3. power cord 8. CableWizard computer cable 4. remote and batteries 9. CableWizard mouse cable 5. lens cap 10. CableWizard audio cable Not shown: Quick Start card, remote cable 3
Inhaltszusammenfassung zur Seite Nr. 15
In t r o d u ct i o n Usage Guidelines • Do not look directly into the projection lens when the projector is turned on. The bright light may harm your eyes. • The top and bottom of the projector can be very hot to the touch after use. Use extreme care or let it cool before lifting it. Do not block the grills at the front or top of the projector. • Restricting the air flow can cause it to overheat and turn off. NOTE: If the LitePro overheats • Handle the projector as you would any product with
Inhaltszusammenfassung zur Seite Nr. 16
Setting up the Projector
Inhaltszusammenfassung zur Seite Nr. 17
SETTING UP THE PROJECTOR 1 Place the projector on a flat surface. • The projector must be within 10 feet of your power source and within 10 feet of your computer. If you want to project from behind a translucent screen, set • up the projector behind your screen. See “Rear Projection” NOTE: An optional extension on page 40 to reverse the image. cable, sold separately, lets you • If you are installing the projector on the ceiling, refer to the increase the distance between the LitePro 200 S
Inhaltszusammenfassung zur Seite Nr. 18
S e tti n g u p th e P r o j e c to r Connecting the CableWizard to the Projector The CableWizard simplifies the connection process by providing a central hub for all the connections between the projector and your computer. The connectors on the CableWizard are labeled with icons. Connect the end of the CableWizard cord to the connector on the projector’s connector panel (Figure 3). CAUTION: Turn off the computer, monitor and projector whenever you connect or disconnect cables. IGURE 3 F
Inhaltszusammenfassung zur Seite Nr. 19
• If you’re connecting an IBM-compatible desktop or laptop com- puter, turn the selector until the window displays “PC.” computer monitor NOTE: You must disconnect all mouse cables before turning the selector on the CableWizard. audio IGURE 5 F Selecting the IBM-compatible connectors on the CableWizard If you’re connecting a Macintosh desktop or an Apple PowerBook • computer, turn the selector until the window displays “Mac™.” monitor computer mouse audio FIGURE 6 Selecting the Macintosh con
Inhaltszusammenfassung zur Seite Nr. 20
S e tti n g u p th e P r o j e c to r Preparing to Connect Your Equipment to the Projector Now you’re ready to connect your equipment. Computers are connected to the Cable Wizard. Video players and other equip- ment, such as external speakers, are connected directly to the projector. Steps for connecting the different types of equipment are given on the pages listed below. NOTE: Before you continue, make sure the projector and your Equipment you want to connect Page equipment are turned off.
