Inhaltszusammenfassung zur Seite Nr. 1
MULTIMEDIA PROJECTOR
MODEL LC-XT9
✽ Projection lens is optional.
OWNER'S INSTRUCTION MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
TO THE OWNER Safety Precaution Before operating this projector, read this manual thoroughly and operate the projector properly. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC This projector provides many convenient features and SHOCK, DO NOT EXPOSE THIS APPLIANCE functions. Operating the projector properly enables you to TO RAIN OR MOISTURE. manage those features and maintain it in better condition for a – This projector produces intense light from the projection considerable time. lens. Do
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or Read all of the instructions given here and retain them for later local power company. use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp
Inhaltszusammenfassung zur Seite Nr. 4
COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful inter
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENTS FEATURES AND DESIGN 6 COMPUTER INPUT 26 SELECTING INPUT SOURCE 26 SELECTING COMPUTER SYSTEM 26 PREPARATION 7 PC ADJUSTMENT 28 AUTO PC ADJUSTMENT 28 MANUAL PC ADJUSTMENT 29 NAME OF EACH PART OF PROJECTOR 7 PICTURE IMAGE ADJUSTMENT 31 SETTING-UP PROJECTOR 8 IMAGE LEVEL SELECT 31 CONNECTING AC POWER CORD 8 IMAGE LEVEL ADJUSTMENT 32 LENS INSTALLATION 9 POSITIONING PROJECTOR 9 PICTURE SCREEN ADJUSTMENT 33 LENS SHIFT ADJUSTMENT 9 PICTURE LEVEL AND TILT ADJUSTMENT 10 INSTALLING PROJEC
Inhaltszusammenfassung zur Seite Nr. 6
FEATURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Motor-driven Lens Shift ◆ Compatibility This projector widely accepts various video and Projection lens can be moved up, down left and right with computer input signals including; motor-driven lens shift function. This fun
Inhaltszusammenfassung zur Seite Nr. 7
PREPARATION NAME OF EACH PART OF PROJECTOR FRONT OF CABINET INFRARED POWER CORD REMOTE RECEIVER CONNECTOR PROJECTION LENS (Option) MAIN ON / OFF LENS CAP SWITCH (Option) CARRYING HANDLE CAUTION Do not turn on a projector with lens cap LEVEL AND TILT ADJUST HANDLE attached. High temperature from light beam may damage lens cap and result in fire hazard. BACK OF CABINET INFRARED EXHAUST VENT REMOTE RECEIVER HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a proje
Inhaltszusammenfassung zur Seite Nr. 8
PREPARATION SETTING-UP PROJECTOR CONNECTING AC POWER CORD This projector uses nominal input voltages of 120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector wit
Inhaltszusammenfassung zur Seite Nr. 9
PREPARATION LENS INSTALLATION Before setting up a projector, install Projection Lens on a Projector. 1. Before installation, check where a projector is used and prepare suitable lens. For specifications of Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a projector. 2. For installation, refer to installation manual supplied to a Projector. When moving or setting up a projector, be sure to replace a Lens Cap to protect a surface. And be careful no
Inhaltszusammenfassung zur Seite Nr. 10
PREPARATION PICTURE LEVEL AND TILT ADJUSTMENT REAR ADJUSTABLE Picture tilt and projection angle can be adjusted with FEET. (Refer to P7). handles on both sides of a projector. Projection angle can be adjusted to 5.7 degrees upper way. LEVEL AND TILT ADJUST HANDLE Press knob on handle. Handle pop out. KNOB 1 Turn handles (right and left) until picture is projected on 2 proper position. Adjust height of rear adjustable feet by rotating them until projector properly stabled on table. Press knob
Inhaltszusammenfassung zur Seite Nr. 11
PREPARATION MOVING PROJECTOR For safety, be sure to hold Carrying Handles CARRYING on both sides by 2 or more people when HANDLE moving a projector. Moving it unproperly may result in damage of cabinet or person's injury. Replace lens cap and retract feet to prevent damage to lens and cabinet. Pull up lock buttons on each side of carrying handles 1 and release locks. LOCK BUTTONS Pull carrying handles out fully until it's locked (with a 2 click). Move a projector by holding two handles by 2 or
Inhaltszusammenfassung zur Seite Nr. 12
CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal Boards. For Terminal Boards, contact sales dealer where you purchased a projector. 4 TERMINAL SLOTS (Factory set) AUDIO CONTROL PORT SERIAL PORT IN DVI R L DVI Terminal (MONO) SERIAL POR
Inhaltszusammenfassung zur Seite Nr. 13
CONNECTING PROJECTOR INPUT/OUTPUT TERMINALS AND JACKS INPUT 2 INPUT 1 INPUT 1, 2, 3 DVI INPUT TERMINAL AUDIO INPUT JACKS 5 BNC INPUT JACKS Connect component video output (Cr, Y, Connect computer output Connect audio output Cb or Pr, Y, Pb) from video equipment to (Digital/Analog DVI-I type) to from computer or video R/Pr, G/Y and B/Pb jacks or connect this terminal. equipment to these jacks. computer output [5 BNC Type (Red, (Refer to P15.) (Refer to P15, 16.) Green, Blue, Horiz. Sync and Vert.
Inhaltszusammenfassung zur Seite Nr. 14
CONNECTING PROJECTOR USB PORT (Series B) SERIAL PORT IN TERMINAL This port is used to service this projector. If you control a projector by computer, Connect USB port of computer to this you must connect a cable (not provided) port. from your computer to this terminal. SERIAL PORT OUT TERMINAL This terminal outputs signal AUDIO CONTROL PORT SERIAL PORT IN DVI R L from SERIAL PORT IN. More than two projectors can be controlled with one computer (MONO) by connecting SERIAL PORT AUDIO CONTROL
Inhaltszusammenfassung zur Seite Nr. 15
CONNECTING PROJECTOR CONNECTING TO COMPUTER Cables used for connection (✽ = Cables are not supplied with this projector.) • VGA Cable (HDB 15 pin) NOTE : • DVI Cable ✽ When connecting cable, power cords of both a • BNC Cable (BNC x 5) ✽ projector and external equipment should be disconnected from AC outlet. Turn a projector • Audio Cables (RCA x 2) ✽ and peripheral equipment on before computer is switched on. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA/WXGA/UXGA) De
Inhaltszusammenfassung zur Seite Nr. 16
CONNECTING PROJECTOR CONNECTING TO VIDEO EQUIPMENT Cables used for connection • Video Cable (BNC x 3) ✽ • DVI Cable ✽ • HDB 15 pin-Scart 21 pin Cable ✽ • DVI-VGA Adapter ✽ • Audio Cable (RCA x 2) ✽ (✽ = Cables are not supplied with this projector.) Component video output equipment. Video Source (example) (such as DVD player or Video Cassette Recorder Video Disc Player high-definition TV source.) Component Video Output Digital Output RGB Scart Audio Output (HDCP compatible) 21-pin Output Pr/Cr Y
Inhaltszusammenfassung zur Seite Nr. 17
BEFORE OPERATION SIDE CONTROLS AND INDICATORS REAR INDICATORS SIDE CONTROLS FRONT INDICATORS SIDE CONTROLS POWER ON–OFF BUTTON ZOOM BUTTONS FOCUS BUTTONS Used to adjust focus. (P24) Used to turn a projector on Used to adjust zoom. or off. (P23) (P24) ZOOM FOCUS ON-OFF MENU BUTTON LENS SHIFT BUTTON Used to open or close MENU Used to select LENS operation. (P21, 22) SHIFT function. (P24) SELECT BUTTON LENS SHIFT INPUT 1/2 MENU INPUT 1/2 BUTTON Used to execute item selected. It is also used to U
Inhaltszusammenfassung zur Seite Nr. 18
LAMP READY WARNING TEMP. LAMP REPLACE BEFORE OPERATION INDICATORS FRONT INDICATORS LAMP READY WARNING TEMP. LAMP REPLACE LAMP REPLACE INDICATOR LAMP INDICATOR WARNING TEMP. INDICATOR READY INDICATOR This indicator flashes red This indicator is dim when a This indicator lights green This LAMP REPLACE when internal projector projector is turned on. And when a projector is ready to indicator lights yellow when temperature is too high. bright when a projector is in be turned on. And it any of Proj
Inhaltszusammenfassung zur Seite Nr. 19
BEFORE OPERATION OPERATION OF REMOTE CONTROL AUTO PC ADJ. BUTTON POWER ON-OFF BUTTON LIGHT BUTTON Used to operate AUTO PC Adjustment function. (P28) Used to turn projector on or Lights the buttons on the remote off. (P23) control for about 10 seconds. NO SHOW BUTTON Used to turn picture into MENU BUTTON black image. (P25) Used to select MENU operation. (P21, 22) SELECT BUTTON POINT (UP / DOWN / LEFT / RIGHT) Used to execute item BUTTONS selected. It is also used to Used to select an item or
Inhaltszusammenfassung zur Seite Nr. 20
BEFORE OPERATION REMOTE CONTROL BATTERIES INSTALLATION Remove battery Slide batteries into Replace compartment lid. 1 2 3 compartment lid. compartment. Two AA size batteries Pull up lid and For correct polarity (+ and remove it. –), be sure battery terminals are in contact with pins in compartment. To insure safe operation, please observe following precautions : ● Use (2) AA or LR6 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● A
