Inhaltszusammenfassung zur Seite Nr. 1
ImagePro 8758/8772
USER'S GUIDE
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Declaration of Conformity Canada Manufacturer: InFocus Corporation, 27700B SW Parkway Ave. Wilsonville, Oregon This Class A digital apparatus complies with Canadian ICES-003. 97070 USA Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands Agency Approvals We declare under our sole responsibility that this projector conforms to the following UL, CUL, TUV, GOST directives and norms: Other specific C
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents If you are experienced in setting up presentation systems, use the included Quick Set Up card. For complete details on connecting and operating the projector, refer to this User’s Guide. Electronic versions of this User’s Guide Introduction 5 in multiple languages are available on the included CD and on our website. Connecting a computer 7 Required computer connections 7 The website also has technical specifications (an interactive image size cal- Displaying a computer image
Inhaltszusammenfassung zur Seite Nr. 5
R S-video 1 audio out computer 1 computer 2 network serial control audio in L video 2 audio in monitor out computer in video in Important Operating Considerations for Safety Place the projector in a horizontal position no greater than 15 degrees Do not place objects or people in the 2 foot (.6m) area along the side of the projector. off axis. For ceiling mount applications, this area should be 5 feet (1.5m). Locate the projector in a well-ventilated area without any obstructions to intake
Inhaltszusammenfassung zur Seite Nr. 6
R S-video 1 computer 1 audio out computer 2 serial control network audio in L video 2 audio in monitor out computer in video in Projector components and features Introduction keypad Your new digital projector provides computer and video inputs and has XGA 1024x768 resolution. The projector is easy to connect, easy to use, easy to maintain. An Interactive Display on the top of the projector gives you speakers constant feedback on the status of the projector. Online Registration Register your
Inhaltszusammenfassung zur Seite Nr. 7
Connector Panel Connector panel of 8772 The 8758 provides one computer and two video connectors: external one M1-D/A (HD, DVI, and computer) speaker M1-D/A (audio out) s-video one S-video computer monitor audio RS232 serial control one composite RCA R S-video 1 computer 1 audio out monitor out serial control It also has an RS-232 serial connector for serial control. The Command Line audio in L video 2 Interface (CLI) specifications and commands are on our website. audio in computer in vid
Inhaltszusammenfassung zur Seite Nr. 8
Connecting a computer connect computer cable R S-video 1 audio out computer 1 Required computer connections computer 2 network serial control audio in L video 2 audio in monitor out computer in video in Connect the black end of the computer cable to the to the Computer 1 con- nector on the projector. Connect the blue end to the video port on your com- puter. If you are using a desktop computer, you first need to disconnect the monitor cable from the computer’s video port. Connect the black pow
Inhaltszusammenfassung zur Seite Nr. 9
If you prefer connecting your LP640 to your computer with an optional VESA cable, connect one end of the cable to the VESA port on your com- connect VESA cable R S-video 1 puter, and connect the other end of the cable to the blue Computer 2 con- computer 1 computer 2 audio out network serial control audio in L video 2 audio in nector on the projector. monitor out computer in video in You can control the projector from an LCD control panel or computer by connect RS-232 cable R S-video 1 connect
Inhaltszusammenfassung zur Seite Nr. 10
Displaying a computer image remove lens cap Remove the lens cap. Press the Power button on the top of the projector or the remote. press Power button The LED flashes green and the fans start to run. When the lamp comes on, the startup screen is displayed and the LED is steady green. It can take a minute for the image to achieve full brightness. The Interactive Display on the projector indicates the startup status. ? No startup screen? Get help on page 17. turn on computer Turn on your compu
Inhaltszusammenfassung zur Seite Nr. 11
a First-time projector use with Windows 98 The first time you connect a computer running Windows 98 to the projector, the computer recognizes the projector as “new hardware” and the Add New Hardware Wizard appears. Follow these instructions to use the Wiz- ard to load the correct driver (which was installed with your Windows operating system). If you are running Windows 2000, Windows ME, or Window XP, skip these steps and go to “Adjusting the image” on page 12. b a Click Next to begin search
Inhaltszusammenfassung zur Seite Nr. 12
Skip this page if you did not connect the USB portion of the M1 com- puter cable For Windows 98: If you connected the USB cable, the Add New Hardware Wizard appears again. Drivers must be installed to use the USB functionality. The Wizard launches two times. The first time it detects a USB Human Interface Device (for the key- board). The second time it detects a USB Human Interface Device (for the mouse). For Windows 2000, Windows ME, and Windows XP: The USB drivers are automatically
Inhaltszusammenfassung zur Seite Nr. 13
R S-video 1 computer 1 computer 2 audio out network serial control L video 2 monitor out audio in audio in computer in video in R S-video 1 computer 1 computer 2 audio out network serial control audio in audL io in video 2 monitor out computer in video in R S-video 1 audio out computer 1 computer 2 network serial control audio in L video 2 monitor out audio in computer in video in Adjusting the image release button adjust height Adjust the height of the projector, if necessary, by pressing the r
Inhaltszusammenfassung zur Seite Nr. 14
Connecting a video device R S-video 1 connect A/V cable computer 1 computer 2 audio out network serial control Standard video connections audio in L video 2 audio in monitor out computer in video in Plug the audio/video (A/V) cable’s yellow connector into the video-out connector on the video device. Plug the other yellow connector into the yel- low Video 2 connector on the projector. Plug a white connector into the left audio out connector on the video device and plug a red connector into th
Inhaltszusammenfassung zur Seite Nr. 15
R S-video 1 computer 2 aud o ou computer 1 se a cont o i t network ri l r l aud o n L video 2 monitor out i i co pute n audio in deo n m r i vi i R S-video 1 compute 2 audio out computer 1 r network serial control audio in L audio in video 2 monitor out computer in video in Displaying a video image remove lens cap Remove the lens cap. press Power button Press the Power button on the top of the projector or the remote. The LED flashes green and the fans start to run. When the lamp comes on, the
Inhaltszusammenfassung zur Seite Nr. 16
i R S-v deo 1 computer 2 audio out computer 1 network serial control audio in L i i video 2 monitor out i aud o n computer n video in R S-video 1 audio out computer 1 computer 2 serial control network audio in L video 2 audio in monitor out computer in video in Adjust the zoom or focus rings by rotating them until the desired image size adjust zoom and focus and focus are produced. zoom focus If the image is not square, adjust the vertical keystone using the buttons on adjust keystone the keyp
Inhaltszusammenfassung zur Seite Nr. 17
Shutting down the projector Troubleshooting your setup The projector automatically blanks the screen after no active source is If your image appears correctly on the screen, skip to the next section detected for 30 minutes. This blank screen helps preserve the life of the pro- (page 25). If it does not, troubleshoot the setup. The Interactive Display and jector. The image returns when an active source is detected or a remote or LED on top of the projector indicate the state of the projector a
Inhaltszusammenfassung zur Seite Nr. 18
A A R S-video 1 audio out computer 1 computer 2 network serial control audio in audL io in video 2 monitor out computer in video in R S-video 1 computer 1 computer 2 audio out network serial control audio in L video 2 audio in monitor out computer in video in R S-video 1 computer 1 computer 2 audio out serial control network audio in L video 2 audio in monitor out computer in video in R S-video 1 o r 2 audio out computer 1 c mpute network serial control audio in L video 2 audio in monitor out co
Inhaltszusammenfassung zur Seite Nr. 19
A A A B R S-video 1 computer 2 audio out computer 1 serial control network audio in L video 2 monitor out audio in computer in video in R S-video 1 computer 2 audio out computer 1 serial control network audio in L video 2 monitor out audio in computer in video in S-video 1 R compute 1 computer 2 audio out r netwo k serial control r audio in L video 2 monitor out audio in computer in video in R S-video 1 audio out computer 1 computer 2 network serial control audio in audL io in video 2 monitor ou
Inhaltszusammenfassung zur Seite Nr. 20
Set your computer’s display resolution to Image clear and not cropped Image fuzzy or cropped the native resolution of the projector (Start>Settings>Control A Panel>Display>Settings tab, select A A A 1024x768) For a laptop, disable laptop monitor or turn-on dual- display mode Connect USB cable (page 7) then load USB Remote advances slides Remote control not advancing PowerPoint slides drivers, if needed (page 10). See page 25 for information on the remote R S-video 1 audio out computer 1 co
