Inhaltszusammenfassung zur Seite Nr. 1
Projector
8793H
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
WARNING ►Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product.
NOTE • In this manu
Inhaltszusammenfassung zur Seite Nr. 2
First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage. NOTICE This entry notices of fear of causing trouble. Important safety instruction The followings are import
Inhaltszusammenfassung zur Seite Nr. 3
Regulatory notices About Electro-Magnetic Interference In CANADA This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are applicable Declaration of Conformity Trade name HITACHI / DUKANE Model Number CP-RX94 / 8793H Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. Operation is subject to the fol
Inhaltszusammenfassung zur Seite Nr. 4
Regulatory notices (continued) About Waste Electrical and Electronic Equipment The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment, display the chemical symbol Hg, Cd, or Pb,
Inhaltszusammenfassung zur Seite Nr. 5
Preparing for the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. Holding the hook part of the battery 1 2 3 1. cover, remove it. Align and insert the two AA batteries 2. (HITACHI MAXELL or HITACHI MAXELL ENERGY, Part No.LR6 or R6P) according to t
Inhaltszusammenfassung zur Seite Nr. 6
Arrangement Refer to table T-1 and figures F-1 and F-2 at the end of this manual to determine the screen size and projection distance (from the projector’s end). The values shown in the table are calculated for a full size screen. a Screen size (diagonal) b Projection distance (±10%, from the projector's end) c1 , c2 Screen height (±10%) • If the projector is used at an altitude of about 1600 m (5250 feet) or higher, set ALTITUDE of the SERVICE item in the OPTION menu to HIGH. Otherwise
Inhaltszusammenfassung zur Seite Nr. 7
Connecting with your devices Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged. After making sure that the projector and the devices are turned off, perform the connection, according to the fo
Inhaltszusammenfassung zur Seite Nr. 8
Connecting power supply Put the connector of the power cord into the 1. AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the 2. outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER AC IN ON function activated, the connection of the power supply make the projector turn on. Power cord WARNING ►Please use extra caution when connecting the power cord, as inco
Inhaltszusammenfassung zur Seite Nr. 9
Turning on the power Make sure that the power cord is fi rmly and correctly connected to the 1. projector and the outlet. STANDBY/ON button Make sure that the POWER indicator is 2. POWER indicator steady orange. Press the STANDBY/ON button on the 3. projector or the remote control. The projection lamp will light up and the POWER indicator will begin blinking in VIDEO COMPUTER MY SOURCE/ DOC.CAMERA ASPECT AUTO SEARCH BLANK green. When the power is completely on, the MAGNIFY FREEZE PAGE V
Inhaltszusammenfassung zur Seite Nr. 10
Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 12 degrees. This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is adjustable while pulling up the elevator knob on the same side as it. Holding the pro
Inhaltszusammenfassung zur Seite Nr. 11
Displaying the picture VIDEO COMPUTER MY SOURCE/ DOC.CAMERA Activate your signal source. Turn the 1. ASPECT AUTO SEARCH BLANK signal source on, and make it send the MAGNIFY FREEZE PAGE VOLUME ON UP ＋ VOLUME+ button signal to the projector. OFF DOWN ー VOLUME- button MY BUTTON KEYSTONE 1 2 MUTE Press the INPUT button on the projector. MUTE button 2. Each time you press the button, the POSITION MENU projector switches its input port in turn. ENTER You can also use the remote control to ESC R
Inhaltszusammenfassung zur Seite Nr. 12
Turning off the power STANDBY/ON button POWER indicator Press the STANDBY/ON button on the 1. projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. Press the STANDBY/ON button again 2. while the message appears. VIDEO COMPUTER MY SOURCE/ DOC.CAMERA The projector lamp will go off, and the ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP ON ＋ OFF DOWN ー POWER indicator will begin blinking in MY BUTTON KEYSTONE 1 2 MUTE POSITION MENU o
Inhaltszusammenfassung zur Seite Nr. 13
Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. Type number : 456-8793H Lamp cover Turn the projector off, and unplug the power cord. 1.
Inhaltszusammenfassung zur Seite Nr. 14
Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, if the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury and
Inhaltszusammenfassung zur Seite Nr. 15
Cleaning and replacing the air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. Replace the filters when they are damaged or too soiled. To prepare the new filters, make contact with your dealer and tell the following type number. Type number : NJ27424 2 When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replaceme
Inhaltszusammenfassung zur Seite Nr. 16
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. ® ® Windows : OS:Microsoft ® ® ® Windows XP, Windows Vista , Windows 7 or later ® ® Macintosh : OS:Mac OS 10.2 or later CD-ROM/DVD-ROM drive: ® ® Applications: Microsoft Internet Explorer 6.0 or later ®
Inhaltszusammenfassung zur Seite Nr. 17
Specifications Item Specification Product name Liquid crystal projector Liquid Crystal 786,432 pixels (1024 horizontal x 768 vertical) Panel Lamp 215 W UHP 1 W Speaker Power supply/ AC 100-120 V: 3.3 A, AC 220-240 V: 1.6 A Rated current Power AC 100-120 V: 320 W, AC 220-240 V: 310 W consumption Temperature 5 ~ 35 °C (Operating) range 306 (W) x 77 (H) x 221 (D) mm Size * Not including protruding parts. Refer to figure F-5 at the back of this manual. Weight (mass) approx. 2.3 kg COMPUTER IN1
Inhaltszusammenfassung zur Seite Nr. 18
Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to “Troubleshooting” of User’s Manual - Operating Guide, and run through the suggested checks. If this does not resolve the problem, please consult your dealer or service company. They will tell you what warranty condition is applied. Please check the following
Inhaltszusammenfassung zur Seite Nr. 19
8793H
Inhaltszusammenfassung zur Seite Nr. 20
