Inhaltszusammenfassung zur Seite Nr. 1
Before use
CONTENTS
1
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP-B2U
Inhaltszusammenfassung zur Seite Nr. 2
Before use CONTENTS SAFETY PRECAUTIONS 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte
Inhaltszusammenfassung zur Seite Nr. 3
Before use CONTENTS IMPORTANT PRECAUTIONS 3 In the spaces provided below, record the Model and Serial No. Save Original Packing Materials located at the rear of your LCD projector. The original shipping carton and packing materials will come in handy if you ever have to ship your LCD projector. For maximum protection, repack the set as it was originally packed at the factory. Model No. Serial No. Avoid Volatile Liquid Retain this information for future reference. Do not use volatile liquids,
Inhaltszusammenfassung zur Seite Nr. 4
Before use CONTENTS IMPORTANT SAFETY INSTRUCTIONS 4 CAUTION: PLEASE READ AND 1. Read Owner’s Manual 3. Source of Light OBSERVE ALL WARNINGS Do not look into the lens while the lamp After unpacking this product, read the AND INSTRUCTIONS GIVEN owner’s manual carefully, and follow all is on. The strong light from the lamp may IN THIS OWNER’S MANUAL cause damage to your eyes or sight. the operating and other instructions. AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This
Inhaltszusammenfassung zur Seite Nr. 5
Before use CONTENTS IMPORTANT SAFETY INSTRUCTIONS (Continued) 5 5. Heat 7. Cleaning 9. Overloading The product should be situated away Unplug this product from the wall outlet Do not overload wall outlets; extension from heat sources such as radiators, before cleaning. Do not use liquid cords, or integral convenience heat registers, stoves, or other products cleaners or aerosol cleaners. Use a receptacles as this can result in a risk of (including amplifiers) that produce heat. damp cloth for cl
Inhaltszusammenfassung zur Seite Nr. 6
Before use CONTENTS IMPORTANT SAFETY INSTRUCTIONS (Continued) 6 11. Object and Liquid Entry 13. Stack Inhibited 15. Accessories Never push objects of any kind into this Do not stack other equipment on this Do not place this product on an unstable product through openings as they may product or do not place this product on cart, stand, tripod, bracket, or table. The touch dangerous voltage points or short- the other equipment. product may fall, causing serious injury to out parts that could resu
Inhaltszusammenfassung zur Seite Nr. 7
Before use CONTENTS 7 IMPORTANT SAFETY INSTRUCTIONS (Continued) 16. If glass components, including lens 17. Coin-shaped Battery 18. Keeping of Coin-shaped Batteries and lamp, should break, contact your a) Keep coin-shaped batteries out of After unpacking coin-shaped batteries, dealer for repair service. children’s reach. Be careful not to be keep them in poly bags, etc. separately This product incorporates glass taken internally, especially by one by one when unused. If you leave components, inc
Inhaltszusammenfassung zur Seite Nr. 8
Before use CONTENTS IMPORTANT SAFETY INSTRUCTIONS (Continued) 8 19. Damage Requiring Service 20. Servicing 22. Safety Check Unplug this product from the wall outlet Do not attempt to service this product Upon completion of any service or and refer servicing to qualified service yourself as opening or removing covers repairs to this product, ask the service personnel under the following conditions: may expose you to dangerous voltage or technician to perform safety checks to other hazards. Refer
Inhaltszusammenfassung zur Seite Nr. 9
Before use CONTENTS Power supply cord selection 9 If your line voltage is 220 to 240V, use one of the following types of cable. Plug configuration Plug type Line voltage EURO 220 – 240V 240V 10 – 15A UK 200 – 240V 240V 6A Australian 200 – 240V 240V 10A North American 200 – 240V 240V 15A Switzerland 200 – 240V 240V 6A
Inhaltszusammenfassung zur Seite Nr. 10
Before use CONTENTS Contents 10 Before use Adjustments SAFETY PRECAUTIONS ...................................................... 2 Menu screen structure ....................................................... 33 IMPORTANT PRECAUTIONS ............................................... 3 Quick menu setting ............................................................ 34 IMPORTANT SAFETY INSTRUCTIONS ............................... 4 Adjusting picture (Picture adjustment) ............................ 3
Inhaltszusammenfassung zur Seite Nr. 11
Before use CONTENTS Names of each part on the main unit 11 VOL (–) SELECT/ADJUST button 34 ( / / / ) Decrease the volume. ENTER button 34 MENU button 33 26 INPUT button VOL (+) Increase the volume. ON/STANDBY button 25 TEMP indicator 54 ON indicator 25 54 LAMP indicator 25 54 Intake holes Infrared remote sensor 15 Anti-theft lock Air filter 55 Foot adjuster release button 19 Zooming ring 27 Lens cover 18 Focusing ring 27 Foot adjuster 19 Continued
Inhaltszusammenfassung zur Seite Nr. 12
Before use CONTENTS Names of each part on the main unit (Continued) 12 S-VIDEO jack 23 To enter S video signal from a video equipment, etc. RGB connector 21 To enter RGB signal from a computer, etc. Infrared remote sensor 15 VIDEO jack 23 To enter video signal from a video equipment, etc. RGB S-VIDEO VIDEO CONTROL AUDIO RS-232C Speaker CONTROL connector (RS-232C AUDIO jack (ø3.5mm stereo mini-jack) Connector) 24 62 21 23 Exhaust holes To connect a computer to control To enter audio signal from
Inhaltszusammenfassung zur Seite Nr. 13
Before use CONTENTS Names of each part on the remote control 13 29 KEYSTONE button KEY ON/ STONE STANDBY FREEZE ON/STANDBY button 25 RGB button 26 31 FREEZE button RGB VIDEO 26 VIDEO button RESET MENU MENU button 33 RESET button 35 ENTER SELECT/ADJUST buttons 34 ( / / / ) — VOL VOL + VOL (–) Decrease the volume. VOL (+) Increase the volume. 34 ENTER button ZOOM MUTE + — MUTE button 30 32 ZOOM buttons CT-90038 (– / +)
Inhaltszusammenfassung zur Seite Nr. 14
Before use 5 5 2 2 0 0 3V CR2025 3V 3V 2 2 R R C C CONTENTS 14 Loading a battery The remote control already contains battery. Remove the sheet before using. Follow the steps below when loading the battery. While pushing the holder in the direction 1, slide it out in 1 the direction 2. 1 2 Set a coin-shaped battery (CR2025) with the + side up on the holder. 2 Keep the holder horizontally so that the battery will not fall through. Push back the holder. 3 Notes on coin-shaped batteries • If the rem
Inhaltszusammenfassung zur Seite Nr. 15
Before use KEY ON/ STO E STANDBY FREEZE RGB V EO ESET ME ENTER — VOL VOL + ZOOM MUTE — + N ID R NU STK OE NY E STANDBY ON/ FREEZE RGB VIDEO RESET MENU ENTER —VOL VOL + ZOOM MUTE — + CONTENTS Remote control operation 15 Point the remote control at the infrared remote sensor and press a button. About 15° About 15° Within about 5m Rear side Front side About 15° About 15° Within about 5m Notes • The remote control may not operate when there is sunlight or other strong light such as a fluorescent lam
Inhaltszusammenfassung zur Seite Nr. 16
Installation and connection CONTENTS Floor-mounted projector placement 16 There are two ways of floor-mounted projector placement. Perform the “Projection mode” setting on the menu screen for the projection method. 49 For the ceiling-mounted projector placement, refer to the page 20 . Floor-mounted front projection Floor-mounted rear projection Viewing a picture projected on the front of Viewing a picture projected through the back of the screen from a floor. the screen from a floor installatio
Inhaltszusammenfassung zur Seite Nr. 17
Installation and connection CONTENTS Floor-mounted projector placement (Continued) 17 Place the projector on a steady, level surface such as a table. 1 To obtain proper screen projected, place the projector so that the projecting light hits the screen squarely. Top view Side view Screen Screen 90° 90° Point the lens straight at the center of the screen as above. Place the projector horizontally so that the projecting light hits the screen squarely. Determine the screen size projected on the scre
Inhaltszusammenfassung zur Seite Nr. 18
Installation and connection CONTENTS 18 Floor-mounted projector placement (Continued) Connect the power cord. 3 • Insert one end in the AC IN socket on the projector. Control panel on the main unit • Insert the other end in a wall outlet. Light Light (Orange) The ON indicator lights in orange and the projector turns to standby mode. The mark of ON/STANDBY on the main unit will also light. Take off the lens cover. 4 Push both sides of the lens cover to take off. Notes • Select a room that can be
Inhaltszusammenfassung zur Seite Nr. 19
Installation and connection CONTENTS Projector placement angle adjustment 19 The tilt of the projector can be adjusted using the foot adjuster. Lift the front of the projector until a tilt angle desired is 1 obtained and hold down the foot adjuster release button. PUSH The foot adjuster will stretch. Release the button to lock in position. Foot adjuster Foot adjuster release button Turn the foot adjuster to make fine adjustment of the 2 height. PUSH Turn clockwise to lift up. Lift up Lower Turn
Inhaltszusammenfassung zur Seite Nr. 20
Installation and connection CONTENTS Ceiling-mounted projector placement 20 CAUTION When a ceiling mount is required, please consult with the dealer. Ceiling-mounted front projection Ceiling-mounted rear projection Viewing a picture projected through the back of the screen Viewing a picture projected on the front of the screen from a ceiling installation. from a ceiling installation. Translucent screen Viewer Viewer Perform the “Projection mode” setting on the menu screen for the projection meth
