Inhaltszusammenfassung zur Seite Nr. 1
OWNER'S MANUAL
TM
DLP Projection Television
46HMX85
52HMX85 62HMX85
Owner's Record
The model number and serial number are on the back
46HMX85
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
52HMX85
Model:
Serial No.:
62HMX85
YC/N
23566642
#01E01_46/52/62HMX85 1 5/10/05, 12:39 PM
Black
(E) 46/52/62HMX85
Index Appendix Using the TV’s Setting up Using the Connecting Introduction
Feature
Inhaltszusammenfassung zur Seite Nr. 2
Dear Customer, NOTICE OF POSSIBLE TV STAND INSTABILITY Thank you for purchasing this Toshiba TV. This manual will help CAUTION: This television is for use only with you use the many exciting features of your new TV. Before Toshiba television stands specifically designed operating the TV, please read this manual completely, for this television model. and keep it nearby for future reference. Please contact your authorized Toshiba dealer or visit the Toshiba Canada web site at www.toshiba.ca to det
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions Installation, Care, and Service 1) Read these instructions. Installation 2) Keep these instructions. 3) Heed all warnings. Follow these recommendations and precautions and heed all warnings when installing your TV: 4) Follow all instructions. 5) Do not use this apparatus near water. 17) Never modify this equipment. Changes or modifications 6) Clean only with dry cloth. may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules o
Inhaltszusammenfassung zur Seite Nr. 4
Installation (cont. from previous page) Care (cont. from previous column) 33) For added protection of your TV from lightning and power 27) Always make sure the antenna system is properly surges, always unplug the power cord and disconnect the grounded to provide adequate protection against voltage antenna from the TV if you leave the TV unattended or surges and built-up static charges (see Section 810 of the unused for long periods of time. National Electric Code). Antenna lead-in wire 34) Durin
Inhaltszusammenfassung zur Seite Nr. 5
™ Important notes about your DLP projection TV 1) The light source for this TV is a projection lamp unit with a 5) Depending on the media you are viewing, it is possible, limited service life. When the lamp wears out, the picture although unlikely, that a limited number of viewers may may become dark or black, or the lamp may fail, at which see a “rainbow effect” on the screen, which can, in rare time you must replace the lamp unit. See “Lamp unit instances, result in eye fatigue. This is a rare
Inhaltszusammenfassung zur Seite Nr. 6
Important Safety Information ............................. 2-5 Double-Window aspect ratio .................................. 38 Using the programmed channel search function............. 38 Introduction................................................................ 7 Using the favorite channel search function .............. 39 Welcome to Toshiba ......................................................... 7 Automatic favorite channel search feature ............... 39 Exploring your new TV .........
Inhaltszusammenfassung zur Seite Nr. 7
O I D U R E K T A N A I E L H T E L E T T I I R T O V B A U F S See “Important notes about Introduction TM your DLP projection TV” on page 5. Welcome to Toshiba Thank you for purchasing this Toshiba TV, one of the most TM innovative DLP projection TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. This manual applies to models 46HMX85, 52HMX85, and 62HMX85. The model and serial numbers are on the back of your TV. Wr
Inhaltszusammenfassung zur Seite Nr. 8
Connecting your TV Note: Cables are not supplied with your TV. ● Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses “F” connectors. Coaxial (antenna) cable ● Standard A/V (audio/video) cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. On your TV’s back panel, the standard A/V inputs are color-coded in St
Inhaltszusammenfassung zur Seite Nr. 9
Connecting a VCR This connection allows you to watch local channels and video Note: programs, play or record on the VCR while watching TV, and record If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. from one channel while watching another channel. If you have a VCR with S-video, use an You will need: S-video cable (in the S-video jacks) instead • two coaxial cables of a standard video cable. • one set of standard A/V cables Do not connect a standard video cable
Inhaltszusammenfassung zur Seite Nr. 10
Connecting a cable converter box and VCR Note: This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. watching another channel. To watch basic cable and use the TV’s features, select ANT-1. If you have a VCR with S-video, use an S-video cable (in the S-video jacks) instead of To view premium channels or record with the VCR, select ANT-2, a s
Inhaltszusammenfassung zur Seite Nr. 11
Connecting a DVD player or satellite receiver and a VCR Note: This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another For the highest possible picture quality from a DVD player or satellite receiver without channel. component video or HDMI, use an S-video You will need: cable. (If your DVD player has component • two (or three, if satellite receiver is used) coaxial cables video, see page 12. If your DVD player or satellite receive
Inhaltszusammenfassung zur Seite Nr. 12
® Connecting a DVD player with ColorStream (component video) and a VCR Note: This connection allows you to watch DVD, VCR, and TV programs, and record TV programs. For the highest possible picture quality, use ® component video cables (or an HDMI cable) Your TV has ColorStream (component video) inputs. Connecting between the TV and DVD player. your TV to a DVD player with component video (such as a Toshiba ® You can connect component video cables to DVD player with ColorStream ) can greatly enha
Inhaltszusammenfassung zur Seite Nr. 13
Connecting a DTV receiver/set-top box with ® ColorStream (component video) and a VCR Note: This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV (composite video only) and TV For the highest possible picture quality, use component video cables (or an HDMI cable) programs. between the TV and DTV receiver/set-top Your TV has ColorStream (component video) inputs. Connecting box. your TV to a DTV receiver with component video can greatly You can connect component
Inhaltszusammenfassung zur Seite Nr. 14
Connecting two VCRs Note: This connection allows you to record (dub/edit) from one VCR to If you have a VCR (VCR1) with S-video, use another VCR while watching a videotape. You also can record from S-video cables instead of standard video one TV channel while watching another TV channel. cables for better picture performance. Do not You will need: connect both a standard video cable and an • two coaxial cables S-video cable to VIDEO 1 (or VIDEO 2) at the same time or the picture performance will
Inhaltszusammenfassung zur Seite Nr. 15
Connecting an HDMI™ or a DVI device to the HDMI inputs [1] The HDMI inputs on your TV receive digital audio [1] HDMI = High-Definition Multimedia Interface. and uncompressed digital video from an HDMI [2] DVI = Digital Video Interface. [2] device or uncompressed digital video from a DVI [3] HDCP = High-bandwidth Digital Content Protection. device. [4] EIA/CEA-861/861B compliance covers the transmission of [3] uncompressed digital video with high-bandwidth digital These inputs are designed to acc
Inhaltszusammenfassung zur Seite Nr. 16
Connecting an audio system This connection allows you to use an audio amplifier and external speakers and adjust the audio level by using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers (see “Turning off the built-in speakers” on page 58). You will need: • one pair of standard audio cables Note: To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set above 0 (zero). Fo
Inhaltszusammenfassung zur Seite Nr. 17
U R E K T A N A I E L H T E L E T T I I R T O V B A U F S Using the remote control Preparing the remote control for use Your Toshiba TV remote control has one dedicated TV mode and five universal modes: VCR, Cable/SAT, DVD, Audio1, and Audio2. The target devices and default devices being programmed for each mode are as follows: Target device/Mode mapping Mode Device POWER TV LIGHT SLEEP TV Toshiba TV CABLE/SAT VCR DVD CABLE/SAT Universal Cable, Satellite 12 3 AUDIO1 AUDIO2 VCRUniversal VCR, DVD,
Inhaltszusammenfassung zur Seite Nr. 18
Remote Control functional key chart Toshiba TV Cable Satellite VCR DVD/LD Receiver CD/MD Cassette Key Label (TV) (CBL/SAT) (CBL/SAT) (AUDIO) (AUDIO) (VCR) LIGHT Lights the remote control keys, and toggles between enabled and disabled Illumination mode. SLEEP Sleep timer --- --- --- --- --- --- --- POWER Power Power Power Power Power Power Power Power 1Digit 1 Digit 1 Digit 1 Digit 1 Digit 1 AV input 1 Digit 1 Digit 1 2Digit 2 Digit 2 Digit 2 Digit 2 Digit 2 AV input 2 Digit 2 Digit 2 3Digit 3 Di
Inhaltszusammenfassung zur Seite Nr. 19
Toshiba TV Cable Satellite VCR DVD/LD Receiver CD/MD Cassette Key Label (TV) (CBL/SAT) (CBL/SAT) (AUDIO) (AUDIO) (VCR) TV/VCR VCR --- TV/SAT TV/VCR --- --- --- Reverse AM/FM --- --- --- --- Disc shift AM/FM Disc shift Deck side DISC A/B switch STOP VCR VCR VCR Stop Stop --- Stop Stop REC** VCRVCR VCR Record** --- --- --- Record** POP CH yz POP channel TV TV TV TV TV TV TV up/down SPLIT POP Split TV
Inhaltszusammenfassung zur Seite Nr. 20
O I D U R E K T A N A I E L H T E L E T T I I R T O V B A U F S Programming the remote control for use with your audio/video devices Device code setup Note: 1. Refer to the Device code table on pages 22 – 23 to find the code for the brand of your device. • Every time you replace the batteries, you must reprogram the remote control. If more than one number is listed, try each one separately until • Some newer VCRs are capable of working you find the one that works. on either of two remote codes.
