Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
AX1X.book Page 1 Wednesday, June 30, 2004 9:21 AM Owner’s Record How to Reduce the Risk of "Image Retention" The model and serial numbers are located at the rear of the on the Screen projection TV, below the Sony logo, on the sticker, and also on the TV box (white label). Record these numbers in the spaces provided Please take the following steps to reduce the risk of causing below. Refer to them whenever you call upon your Sony dealer image retention: regarding this product. · When usin
Inhaltszusammenfassung zur Seite Nr. 3
AX1X.book Page 2 Wednesday, June 30, 2004 9:21 AM ❑ To obtain the best picture, do not expose the screen to direct Note on Caption Vision illumination or direct sunlight. It is recommended to use spot This television receiver provides display of television closed lighting directed down from the ceiling or to cover the captioning in accordance with §15.119 of the FCC rules. windows that face the screen with opaque drapery. It is desirable to install the projection TV in a room where the
Inhaltszusammenfassung zur Seite Nr. 4
AX1X.book Page 3 Wednesday, June 30, 2004 9:21 AM Important Safety Instructions 1 Read these instructions. Additional Cleaning Instructions Clean the cabinet of the projection TV with a dry, soft cloth. To 2 Keep these instructions. clean the screen of your projection TV, please use only a clean, soft cloth lightly dampened with water. Stubborn stains such as 3 Heed all warnings. fingerprints can be removed with a clean, soft cloth lightly 4 Follow all instructions. dampened with a soluti
Inhaltszusammenfassung zur Seite Nr. 5
AX1X.book Page 4 Wednesday, June 30, 2004 9:21 AM
Inhaltszusammenfassung zur Seite Nr. 6
AX1X.book Page 5 Wednesday, June 30, 2004 9:21 AM Contents Introducing the Projection TV Welcome ........................................................................................................7 Package Contents..............................................................................7 Features ............................................................................................7 Setting Up the Projection TV Overview .........................................................
Inhaltszusammenfassung zur Seite Nr. 7
AX1X.book Page 6 Wednesday, June 30, 2004 9:21 AM Using the Remote Control Overview .....................................................................................................43 Inserting Batteries.......................................................................................43 Button Descriptions ....................................................................................44 Programming the Remote Control ............................................................46
Inhaltszusammenfassung zur Seite Nr. 8
AX1X.book Page 7 Wednesday, June 30, 2004 9:21 AM Introducing the Projection TV Welcome This chapter describes the contents of the package in which the TV is shipped and provides an overview of the features of your projection TV. Package Contents Along with your new projection TV, the package contains a remote control and two AA batteries. No additional cables are included. These items are all you need to set up and operate the projection TV in its basic configuration. Most components (
Inhaltszusammenfassung zur Seite Nr. 9
AX1X.book Page 8 Wednesday, June 30, 2004 9:21 AM ❑ Component Video Inputs: Offers high quality video for DVD (480p, 480i), and digital set-top box (HD1080i, 720p) connections. ™ ❑ HD Detailer : Wideband video amplifier has a high bandwidth frequency rating, which allows it to send more video information to the screen, resulting in finer picture quality, especially for HD sources. ™ ❑ CineMotion : Reverse 3-2 pulldown processing provides optimal picture quality for film-based sources (me
Inhaltszusammenfassung zur Seite Nr. 10
AX1X.book Page 9 Wednesday, June 30, 2004 9:21 AM Setting Up the Projection TV Overview This chapter includes illustrated instructions for setting up your TV. Topic Page(s) Carrying Your Projection TV/Positioning the TV 10 TV Controls and Connectors 11-13 Basic Connections: Connecting a Cable or Antenna 14-20 Connecting Optional Equipment 24 VCR and Cable VCR and Cable Box 26 Satellite Receiver 28 Satellite Receiver and VCR 30 DVD Player with Component Video Connectors 32 DVD Player with S V
Inhaltszusammenfassung zur Seite Nr. 11
min. 2.4m (approx. 8 ft.) 57" min. 2.1m (approx. 7 ft.) 51" min. 1.8m (approx. 6 ft.) 46" min. 2.4m (approx. 8 ft.) 57" min. 2.1m (approx. 7 ft.) 51" min. 1.8m (approx. 6 ft.) 46" AX1X.book Page 10 Wednesday, June 30, 2004 9:21 AM Carrying Your Projection TV Carrying the TV requires four or more people. Models KP-51/57WS520 provide casters. Be sure to move your projection TV using these casters. Positioning the TV 60˚ 20˚ 20˚ 60 60˚ Recommended Vertical Viewing Angle Recommended
Inhaltszusammenfassung zur Seite Nr. 12
SETUP Setup SETUP SETUP SETUP SETUP AX1X.book Page 11 Wednesday, June 30, 2004 9:21 AM TV Controls and Connectors Model KP-46WT520 provides video inputs (Video 2) on the side. To access, push in and release as shown. Models KP-51/57WS520 provide video inputs (Video 2) on the front. To access, push up and release as shown. KP-51/57WS520 KP-46WT520 Front Video Inputs VIDEO 2 IN S VIDEO 1 1 2 VIDEO L (MONO) 2 AUDIO R S VIDEO VIDEO L (MONO) R AUDIO VIDEO 2 IN KP-46WT520 KP-51/57WS520 1 S VIDE
Inhaltszusammenfassung zur Seite Nr. 13
AX1X.book Page 12 Wednesday, June 30, 2004 9:21 AM Front Panel 1 2 3 4 5 6 7 8 FLASH FOCUS TV/VIDEO — VOLUME + — CHANNEL + TIMER STAND BY POWER Item Description 1 FLASH FOCUS Press to adjust the convergence (see page 40). 2 TV/VIDEO Press repeatedly to cycle through the video equipment connected to the TV’s video inputs. 3 -VOLUME + Press to adjust the volume. 4 -CHANNEL+ Press to scan through channels. To scan quickly through channels, press and hold down either CHANNEL butto
Inhaltszusammenfassung zur Seite Nr. 14
SETUP Setup SETUP SETUP SETUP SETUP AX1X.book Page 13 Wednesday, June 30, 2004 9:21 AM Jack Description 1 AUX Auxiliary RF input that connects to your antenna, CATV cable, or cable box output jack. This is convenient if you are using two VHF/UHF sources (antenna, CATV cable, or cable box). For details, see pages 16 to 19. 2 TO CONVERTER Connects to your cable box input jack. This VHF/UHF output jack lets you set up your TV to switch between scrambled channels (coming through a cable box) a
Inhaltszusammenfassung zur Seite Nr. 15
AX1X.book Page 14 Wednesday, June 30, 2004 9:21 AM Basic Connections: Connecting a Cable or Antenna The way in which you will connect your TV varies, depending on how your home receives a signal (cable, cable box, antenna) and whether or not you plan to connect a VCR. If You Are Connecting See Page Cable or Antenna Only 15 ❏ No cable box or VCR Cable and Antenna Only 16 ❏ No cable box or VCR Cable Box and Cable Only 18 ❏ Cable box unscrambles only some channels (usually premium channels)
Inhaltszusammenfassung zur Seite Nr. 16
SETUP Setup SETUP SETUP SETUP SETUP AX1X.book Page 15 Wednesday, June 30, 2004 9:21 AM Cable or Antenna For best results, use one of the following connections if you are connecting a cable or an antenna and you: Only ❑ Do not need a cable box to unscramble channels. (If you have a cable box, see pages 18-20.) ❑ Do not intend to connect a VCR. (If you have a VCR, see pages 24 and 26.) The connection you choose depends on the cable type you have in your home, as described below. 75-ohm coa
Inhaltszusammenfassung zur Seite Nr. 17
AX1X.book Page 16 Wednesday, June 30, 2004 9:21 AM Cable and Antenna For best results, use this connection if you: ❑ Have a cable and an antenna. Only (This is convenient if you are using a separate rooftop antenna to receive additional channels, such as HDTV channels, that are not provided by your cable company.) ❑ Do not have a cable box or VCR. (if you have a cable box, see pages 18 to 20. If you have a VCR, see pages 24 and 26.) Cable Type Connect As Shown Cable TV (CATV) CATV cable
Inhaltszusammenfassung zur Seite Nr. 18
SETUP Setup SETUP SETUP SETUP SETUP AX1X.book Page 17 Wednesday, June 30, 2004 9:21 AM Notes on Using This Connection To Do This ... Do This ... Switch the TV’s input Press ANT to switch back and forth between the TV’s VHF/UHF and AUX between the cable and inputs. antenna 17
Inhaltszusammenfassung zur Seite Nr. 19
AX1X.book Page 18 Wednesday, June 30, 2004 9:21 AM Cable Box and Cable Only ✍ DIGITAL CABLE BOX USERS: Do not use this connection. The TO CONVERTER jack is not compatible with digital cable boxes. For best results, use this connection if: ❑ Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels. ❑ You do not have a VCR. (If you have a VCR, see pages 24 and 26.) With this connection you can: ❑ Use the
Inhaltszusammenfassung zur Seite Nr. 20
SETUP Setup SETUP SETUP SETUP SETUP AX1X.book Page 19 Wednesday, June 30, 2004 9:21 AM To connect the cable box and cable 1 Connect the cable from your cable company to the TV’s VHF/UHF jack. 2 Use a coaxial cable to connect the TV’s TO CONVERTER jack to the cable box’s input jack. (The TV’s internal converter lets you switch between unscrambled signals coming straight into the TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.) 3 Us
