Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
01COV.book Page 2 Tuesday, April 2, 2002 12:22 PM Note on Caption Vision WARNING This television receiver provides display of television To prevent fire or shock hazard, do not closed captioning in accordance with §15.119 of the FCC expose the projection TV to rain or rules. moisture. Note on convergence adjustment Before you use your projection TV, make sure to adjust CAUTION convergence. For details, see “Adjusting the Convergence RISK OF ELECTRIC SHOCK DO NOT OPEN Automatically – FLA
Inhaltszusammenfassung zur Seite Nr. 3
01COV.book Page 4 Tuesday, April 2, 2002 12:22 PM Overloading IMPORTANT SAFEGUARDS Do not overload wall outlets, extension cords or convenience receptacles For your protection, please read these instructions beyond their capacity, since this can completely, and keep this manual for future reference. result in fire or electric shock. Carefully observe and comply with all warnings, cautions Always turn the set off when it is not and instructions placed on the set or described in the bein
Inhaltszusammenfassung zur Seite Nr. 4
01COV.book Page 14 Tuesday, April 2, 2002 12:22 PM Installing and Connecting the Projection TV Projection TV Rear and Front Panel Rear of projection TV Connectors 0 Front of projection TV Model name1[KP-51WS500] Model name2[KP-57WS500] Model name3[KP-65WS500] [4-088-847-11 (1)]
Inhaltszusammenfassung zur Seite Nr. 5
Installing and Connecting the Projection TV 01COV.book Page 15 Tuesday, April 2, 2002 12:22 PM Installing and Connecting the Projection TV Connection Description 1 DVI-HDTV Can accommodate a copy-protected digital connection * VIDEO (HDCP ) to other devices (such as digital set-top boxes) that AUDIO R/L have compatible interfaces. The DVI-HDTV input terminal is (VIDEO 7 IN) compliant with the EIA-861 standard, and is not intended for use with personal computers. See the instruction manual
Inhaltszusammenfassung zur Seite Nr. 6
Installing and Connecting the Projection TV 01COV.book Page 19 Tuesday, April 2, 2002 12:22 PM Installing and Connecting the Projection TV Connecting a VCR and Cable Use this hookup if: ❑ You have cable TV that does not require a cable box. Disconnect all power sources before making any connections. 1 Connect the cable TV cable to the VCR’s IN jack. 2 Using a coaxial cable, connect the VCR’s OUT jack to the projection TV’s VHF/UHF jack. 3 Using AUDIO and S VIDEO cables, connect the VCR’s Aud
Inhaltszusammenfassung zur Seite Nr. 7
01COV.book Page 20 Tuesday, April 2, 2002 12:22 PM Installing and Connecting the Projection TV Connecting a VCR and Cable Box Use this hookup if: ❑ Your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box, and ❑ You want to enjoy the Twin View feature. With this setup you can: ❑ Use the projection TV remote control to change channels on your cable box when the signal is scrambled. To program your Sony remot
Inhaltszusammenfassung zur Seite Nr. 8
Installing and Connecting the Projection TV 01COV.book Page 21 Tuesday, April 2, 2002 12:22 PM Installing and Connecting the Projection TV VCR YC-15V/30V (not supplied) Coaxial cable VMC-810S/820S (not supplied) VIDEO (yellow) AUDIO-L (white) Cable box S VIDEO AUDIO-R (red) Coaxial cable Rear of projection TV ✍ If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. ✍ You will not be able to change channeles on the VCR. Set your projection TV and
Inhaltszusammenfassung zur Seite Nr. 9
Installing and Connecting the Projection TV 01COV.book Page 23 Tuesday, April 2, 2002 12:22 PM Installing and Connecting the Projection TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the projection TV’s AUDIO and S VIDEO IN jacks. 3 Connect a coaxial cable from y
Inhaltszusammenfassung zur Seite Nr. 10
01COV.book Page 24 Tuesday, April 2, 2002 12:22 PM Installing and Connecting the Projection TV Connecting a Satellite Receiver with a VCR Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Connect the CATV cable to the VCR’s VHF/UHF IN jack. 3 Using a coaxial cable, connect the VCR’s OUT jack to the projection TV’s VHF/UHF jack. 4 Using AUDIO and S VIDEO cables, connect the satellite receiver’s
Inhaltszusammenfassung zur Seite Nr. 11
Installing and Connecting the Projection TV 01COV.book Page 25 Tuesday, April 2, 2002 12:22 PM Installing and Connecting the Projection TV Connecting an Audio Receiver Disconnect all power sources before making any connections. Using audio cables, connect the projection TV’s AUDIO OUT (VAR/FIX) jacks to the audio receiver’s audio LINE IN jacks. Rear of projection TV AUDIO-R AUDIO-L (red) (white) RK-74A (not supplied) Line input Model name1[KP-51WS500] Model name2[KP-57WS500] Model name3[
Inhaltszusammenfassung zur Seite Nr. 12
Installing and Connecting the Projection TV 01COV.book Page 27 Tuesday, April 2, 2002 12:22 PM Installing and Connecting the Projection TV Connecting a DVD Player with A/V Connectors Use this hookup if: ❑ Your DVD player does not have component (Y, PB, PR) jacks. ✍ If your DVD player has video component output connectors: for best picture quality use the connection described on page 26. Disconnect all power sources before making any connections. 1 Using audio cables, connect the DVD player’
Inhaltszusammenfassung zur Seite Nr. 13
01COV.book Page 34 Tuesday, April 2, 2002 12:22 PM Using the Features Using the Remote Control The following table describes the buttons on the remote control that are for more advanced functions. Button Descriptions Outside Panel Button Description 1 MUTING Press to mute the sound. Press again or press VOL + to restore the sound. 2 SLEEP Press repeatedly until the projection TV displays the time in minutes (15, 30, 45, 60, or 90) that you want the projection TV to remain on before shutt
Inhaltszusammenfassung zur Seite Nr. 14
Using the Features 01COV.book Page 35 Tuesday, April 2, 2002 12:22 PM Using the Features Button Description qd POWER Turn on and off the projection TV and other audio/video buttons equipment you have programmed into the remote control. (GREEN) For instructions, see “Programming the Remote Control” on page 68. qf FUNCTION Select the equipment (TV, SAT/CABLE) that you want to buttons operate. The indicator lights up momentarily when pushed to show which device the remote control is operati
Inhaltszusammenfassung zur Seite Nr. 15
01COV.book Page 36 Tuesday, April 2, 2002 12:22 PM Using the Features Inside Panel Button Description 1 SYSTEM OFF Press to turn off the projection TV and all equipment connected with S-Link. 2 N Play 3 m Rewind 4 REC Record 5 x Stop 6 DVD MENU Displays the DVD menu. 7 MTS/SAP Press to scroll through the Multi-channel TV Sound (MTS) options: Stereo, Auto SAP, and Mono. 8 CODE SET Used for programming the remote control to operate non- Sony video equipment. For details, see “Programming the
Inhaltszusammenfassung zur Seite Nr. 16
Using the Features 01COV.book Page 37 Tuesday, April 2, 2002 12:22 PM Using the Features Watching the TV Many TV features can be accessed directly through the remote control. The following will explain the function of some of the buttons found on your remote control. Buttons for 1 TV (FUNCTION) Activates the remote control for use with the projection TV. Projection TV Operations 2 ANT— (AUX input) Press to change between the VHF/UHF input and the AUX input. 3 TV (POWER) Turns the projectio
Inhaltszusammenfassung zur Seite Nr. 17
01COV.book Page 38 Tuesday, April 2, 2002 12:22 PM Using the Features qa DISPLAY Press to display the channel number, current time and channel label (if set). To turn the display off, press DISPLAY again. qs TV/VIDEO Press repeatedly to scroll through available video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, VIDEO 5 VIDEO 6, and VIDEO 7. If you select Skip as a Video Label in the Setup menu, your projection TV will skip the video input you selected (see “Video Label” on page 59). qd M
