Inhaltszusammenfassung zur Seite Nr. 1
LP440, LP441
User’s Guide
59318201 my.okidata.com
Inhaltszusammenfassung zur Seite Nr. 2
Contents Safety, Warnings and Cautions . . . . . . . . . . . . . . . .5 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Notes on Bluetooth/Wireless Communication . . . . . . . . . . . .14 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Unpacking the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Part Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Description of Printer Parts . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 3
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . .69 3
Inhaltszusammenfassung zur Seite Nr. 4
Copyright Information Copyright © 2009 by Oki Data. All Rights Reserved LP440/LP441 Users Guide P/N 59318201, Revision 1.0 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the
Inhaltszusammenfassung zur Seite Nr. 5
Safety, Warnings and Cautions Safety Precautions As a preventive measure to ensure safe usage of this machine so as to safeguard against damage to yourself, other people or property, there are display diagrams used in this instruction manual and on this machine. The displays and their meanings are illustrated in the following pages. Please take time to read and understand the content Warning If this display and its warning is ignored, any mishandling could result in death or serious injur
Inhaltszusammenfassung zur Seite Nr. 6
Basic Hazard Icons The triangle sign means Be careful. The content within the triangle illustrates specific hazards. In this case, the sign on the below means beware of electric shock. The circular sign means prohibited. The content within the circle illustrates a specific prohibition. In this case the sign below means disassembly prohibited. The black circular sign means must do. The content within the sign illustrates specific items that must be carried out. In this case t
Inhaltszusammenfassung zur Seite Nr. 7
Hazard Warnings Liquids Do not place any liquids or small metallic objects near the printer. Should any of these fall into the printer, immediately turn off the power and contact your nearest dealer or service center. Continued use increases the risk of fire or electric shocks. Foreign Matter Do not insert or drop metallic or flammable objects into the openings of the printer (such as outlets for cables). If this happens, immediately turn off the power and contact your nearest d
Inhaltszusammenfassung zur Seite Nr. 8
Abnormal Conditions Continued use of the printer while it is emitting smoke or strange odors increases the risk of fire or electric shocks. Immediately turn off the power and contact your nearest dealer or service center. Do not try to service the printer by yourself. Disassembly Never try to take the unit apart or modify it in any way. Doing so increases the risk of fire or electric shocks. Contact your nearest dealer or service center for repairs. Battery Care Never try to ta
Inhaltszusammenfassung zur Seite Nr. 9
Power Supply Precautions Use only the specified voltage and use only the specified battery charger. Never use the battery charger with any other battery pack except for the specified type. Doing so can rupture the battery, or cause leakage, fire or electric shocks. Never cut, damage or modify the power cord. Also, never place heavy objects on the power cord or heat or pull the power cord. Doing so may damage the cord. Should the power cord ever become seriously damaged (inter
Inhaltszusammenfassung zur Seite Nr. 10
Cautions Location Do not locate the printer in the area subjected to high humidity or dew. If dew forms inside the printer, immediately turn off the printer and do not use it until all moisture has dried up. Continued use creates the danger of electric shock and can damage the printer. Power Do not use wet hands to operate the power switch, replace the battery pack or unplug the AC adapter or battery charger. Doing so increases the risk of electric shock. Hazardous Parts The entire
Inhaltszusammenfassung zur Seite Nr. 11
Replacing the Battery Pack Use only specified replacement battery packs. Make sure to install the pack in the correct direction to avoid the danger of injury or damage to surrounding areas. To replace small-size rechargeable (Lithium ion) batteries, seal the old battery pack with tape and ask our sales representative or service center about disposal methods. Do not place the battery pack together with other batteries such as dry batteries. Storing the Printer If you have no plan t
Inhaltszusammenfassung zur Seite Nr. 12
Other Precautions Avoid placement in extreme temperatures. Do not place the printer in highly humid areas or at outside the -15°C to 50°C temperature range. When the printer is being transported... The normal vibration encountered during transportation is acceptable, but avoid dropping the printer or exposing it to extreme vibrations. Do not disassemble or modify the printer The printer has high-precision components inside requiring e adjustments. Use only the specified cables. Sp
Inhaltszusammenfassung zur Seite Nr. 13
Overview This manual is intended to familiarize you with the basic features and operation of your printer in a short time. Key Features: High speed CPU and printing speed Long battery life Supports Infrared, RS-32C and Bluetooth I/O Durable and rugged design Supports media up to 2.6 inches (67mm) in width Supports MB200 emulation or SBPL command compatibility Please read this manual carefully to make full use of this product. 13
Inhaltszusammenfassung zur Seite Nr. 14
Notes on Bluetooth/Wireless Communication Compliance Statement This product has been certified for compliance with the relevant radio interference regulations of your country or region. To ensure continued compliance, do not: Disassemble or modify this product Remove the certificate label (serial number seal) affixed to this product Note: Use of this product near microwave and/or other wireless LAN equipment, or where static electricity or radio interference is present, may shorten the
Inhaltszusammenfassung zur Seite Nr. 15
Setup Unpacking the printer If anything here is missing, contact your nearest Oki dealer or service center. 1 Safety, Warranty and Regulatory Information 2 Quick Guide 3 Printer Note: Battery Pack Note: An external battery charger is available separately. 15
Inhaltszusammenfassung zur Seite Nr. 16
Part Names Top View 1 Easy Cutter 2 Label Dispenser 3 Main Cover 4 Cover Release Lever 5 Dispenser Unit Bottom View 1 Belt Clip 16
Inhaltszusammenfassung zur Seite Nr. 17
Interior View 1 Label Width Markings 2 Platen 3 Label Guides 17
Inhaltszusammenfassung zur Seite Nr. 18
Control Panel 1 LCD Display (WLAN Models only) 2 POWER button 3 PRINT button 4 FEED button 5 Battery Indicator (Charge Indictor on WLAN models) 6 Status LED 7 IrDA filter 18
Inhaltszusammenfassung zur Seite Nr. 19
Side Panel 1 RS-232c Port 2 DC Input 3 DIP Switches 4. Battery Cover 5. Label Guide Adjust Dial 19
Inhaltszusammenfassung zur Seite Nr. 20
DIP Switches ON OFF Description of Printer Parts Part Function Part Function RS-232C Allows connection to a Label Set to meet the size of the Interface computer or guide label used hand-held terminal RS-232C Protects the RS-232C Label Allows adjustment of the cover connector from dust guide label guide to fit the width and damage adjust of an installed label roll dial Cover Opens up to allow the Cover for Protects the label guide installation of labels Label adjustment dial from dust gui
