Inhaltszusammenfassung zur Seite Nr. 1
P3PC-1362-01EN
fi-553PR Imprinter
Operator's Guide
This manual uses recycled paper.
Ce manuel est imprimé sur papier recyclé.
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
Questo manuale è stampato su carta riciclata.
Este manual se ha impreso con papel reciclado.
c
PFU LIMITED 2005.9 PRINTED IN SINGAPORE
Inhaltszusammenfassung zur Seite Nr. 2
Contents Introduction................................................................................................................................................. 1 1. Preparations............................................................................................................................................ 4 1.1. Checking the Package Contents........................................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Introduction Thank you for purchasing the fi-553PR Imprinter option for Regulatory Information fi-5530C Color Image Scanner. It helps you to organize your documents by printing a name, date, time or a serial number on the back side of the scanned FCC declaration document. This equipment has been tested and found to comply This guide explains how to install and use the Imprinter. with the limits for a Class B digital device, pursuant This guide also contains important information su
Inhaltszusammenfassung zur Seite Nr. 4
Bescheinigung des Herstellers / Symbols Used In This Manual Importeurs This manual uses the following symbols in explanations in addition to warning indications Für den fi-553PR wid folgendes bescheinigt: This symbol alerts operators to particularly ATTENTION important information. Be sure to read this • In Übereinsstimmung mit den Bestimmungen information. der EN45014(CE) funkentstört This symbol alerts operators to helpful advice • Maschinenlärminformationsverordnung 3. HINT re
Inhaltszusammenfassung zur Seite Nr. 5
CAUTION Safety Precautions The following describes important cautions. FOLLOW THESE INSTRUCTIONS AND BE SURE TO HEED ALL WARNINGS AND CAUTIONS DESCRIBED Install the scanner on a desk so that none of its parts BELOW. protrude outside of the desktop. Also, make sure that the scanner is installed on a flat, level surface WARNING Do not install the scanner on unstable surfaces. Install the scanner on a level surface that is free of Do not touch the power plug with wet hands.
Inhaltszusammenfassung zur Seite Nr. 6
1. Preparations 1.1. Checking the Package Contents Front Side When you unpack the Imprinter package, make sure that all ADF（Automatic Document Feeder） parts are included. Cover Refer to the package contents list included in the Imprinter ADF Paper Chute package box. If any components are missing, please contact the store where you purchased the Imprinter. Operator panel ・ Function No. display 1.2. Names and Functions of Parts ・ [Functi
Inhaltszusammenfassung zur Seite Nr. 7
2. Installation ATTENTION ● Be careful not to put the Scanner on the 2.1. Installing the Imprinter Fix Tabs or hitting it hard against them. You may damage the Fix Tabs. Install the Imprinter as follows: ● Be careful not to pinch your finger. 1. Turn off the Scanner power and disconnect the power cable. 2. Remove the Stacker from the scanner. Raise the Stacker upright as shown below while placing your After installation fingers under the arms. Push the left arm gently towards th
Inhaltszusammenfassung zur Seite Nr. 8
7. Connect the power cable to the scanner. ATTENTION Do not touch the metal part of the Print Cartridge nor put the tape back again. 7. Put the Print Cartridge into the holder as below. 2.2. Mounting the Print Cartridge Mount the print cartridge as follows: ATTENTION When installing or replacing the Print Cartridge, be careful not to insert it out of place. 1. Confirm that the scanner is turned off. 2. Grab both ends of the Print Section Cover, pull and turn it towards you to o
Inhaltszusammenfassung zur Seite Nr. 9
Feeding direction 2.3. Operation Test HINT There are following print test patterns: After installing the Imprinter, check if the printing operation Test pattern 1( ) (Horizontal): can be done in the Offline Print Test mode of the scanner. ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`0000 0000 1. While pressing [Function] button on the operator Test pattern 2 ( 2) (Horizontal): panel, press button. abcdefghijklmnopqrstuvwxyz{|}~ 00000000 Keep pressing [Function］ button. Test pattern 3
Inhaltszusammenfassung zur Seite Nr. 10
3. Basic Operation Available items are: HINT 3.1. Setting Printing Position • Position to start printing (Y offset) • Font orientation (Horizontal or vertical) 1. Open the Print Section Cover. • String to print （Max. 40 characters） • Counter Setup （column, add/subtract, step, 2. Move the Print Cartridge Holder to an appropriate etc.） printing position. For the details, please refer to “FUJITSU TWAIN 32 Scanner Driver User’s Guide” or “TWAIN Grab the Print Cartridge Holder as belo
Inhaltszusammenfassung zur Seite Nr. 11
3. Pinch the Arm with your fingers as shown below 8. Move the Print Cartridge Holder to an appropriate and release the Arm. printing position. The holder should be positioned where the printing area of document (Section 6) will pass under it. 4. Remove the old Print Cartridge. When printing close to document edge, be ATTENTION careful about the position so that characters may not be printed off of the document. 9. Close the Print Section Cover. 5. Remove the protect
Inhaltszusammenfassung zur Seite Nr. 12
Click the [OK] button. A confirmation screen appears. 3. Open the ADF cover. Then click the [OK] button. The Ink remain counter is reset to 100%. ADF Cover For Windows 95, Windows NT 4.0 Right-click the icon in task bar and select [Option]. Imprinter Cover Click the [Device Setting] tab. Click the [Clear] button on [Remaining Ink]. 3. Remove the jammed documents. 4. Close the ADF cover. ADF Cover Imprinter Cover Click the [OK] button. A confirmation screen appears. Then
Inhaltszusammenfassung zur Seite Nr. 13
4. Daily Care 4.1. Cleaning the Print Cartridge 4.2. Cleaning the Imprinter Ink or stains stuck to the nozzle surface of the Print While you use the Imprinter frequently, ink sticks to the Cartridge or leaving the Imprinter unused for a while may Imprinter base and that makes the paper dirty. cause poor print quality due to blocked ink emission holes As a part of daily maintenance, clean the Imprinter base by in the nozzle. If your Imprinter has these types of trouble, following the proc
Inhaltszusammenfassung zur Seite Nr. 14
4. Confirm that the dirt or dust is removed from the 4.3. Cleaning the Rollers rollers, then close the Imprinter Cover. When ink or paper dust is stuck on the Imprinter feed roller surfaces, documents may not feed smoothly. To prevent feed problems, clean the roller surfaces regularly. Recommended cleaning cycle is every 5,000 sheets. HINT Actual cleaning cycle may be shorter depending on usage and documents. 1. Open the Imprinter Cover while the scanner is turned on.
Inhaltszusammenfassung zur Seite Nr. 15
5. Error Messages If the Function Number Display shows the following alternately, the Imprinter requires some intervention by customer.. Function Function Description: The Print Cartridge is not installed. How to solve: Open the Print Section Cover and confirm that the Print Cartridge is installed correctly. Function Function Description: A problem occurred to the Imprinter. How to solve: Open the Print Section Cover and confirm that the Print Cartridge is installed c
Inhaltszusammenfassung zur Seite Nr. 16
Feed direction 6. Specifications Item Specification Printing Method Thermal inkjet printing Print Timing Post printing Printing Characters Alphabet : A to Z, a to z Numeric Characters : 0, 1 to 9 Symbols : ! ” $ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }¯ Maximum number of 40 characters (When using 8 digits counter: 43 characters) characters per line Font orientation Normal: 0º, 180º (horizontal), 90º, 270º (vertical) Narrow: 0º
