Inhaltszusammenfassung zur Seite Nr. 1
Multi-Protocol Print Server
Network User's Guide
Please read this manual thoroughly before using the printer. You can print or view
this manual from the CD-ROM at any time, please keep the CD-ROM in a
convenient place for quick and easy reference at all times.
The Brother Solutions Center (http://solutions.brother.com) is your one stop
resource for all your printer needs. Download the latest drivers and utilities for
your printers, read the FAQs and troubleshooting tips or learn about spec
Inhaltszusammenfassung zur Seite Nr. 2
Trademarks Brother is a registered trademark of Brother Industries, Ltd. HP, HP/UX,JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. DEC, DEC server, VMS, LAT, and ULTRIX are trademarks of Digital Equipment Corporation. UNIX is a trademarks of UNIX Systems Laboratories. Ethernet is trademark of Xerox Corporation. Postscript is trademark of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple, Macintosh, LaserWriter, and AppleTalk are trademarks of Apple Compu
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT NOTE:For technical and operational assistance, you must call. Calls must be made from within that country. In USA 1-800-276-7746 In Canada 1-877-BROTHER (514) 685-6464 (In Montreal) If you have any comments or suggestions, please write to us at: In Europe European Technical Services 1 Tame Street Audenshaw Manchester, M34 5JE UK In USA Printer Customer Support Brother International Corporation 15 Musick Irvine CA 92618 In Canada Brother International Corporation (Canada), Ltd. - Ma
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT INFORMATION: REGULATIONS Federal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulevard Bridgewater, NJ 08807-0911, USA TEL: (908) 704-1700 declares, that the products Product Name: Brother Network Card (BR-net) Model Number: NC-4100h complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
Inhaltszusammenfassung zur Seite Nr. 5
Declaration of Conformity (Europe) We, Brother Industries, Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan declare that this product is in conformity with the following normative documents. Safety: EN 60950, EMC: EN 55022 Class B, EN 55024 following the provisions of the Low Voltage Directive 73/23/EEC and the Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/ 263/EEC and 92/31/EEC). Issued by: Brother Industries, Ltd. Information & Document Company Intel Copyr
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents IMPORTANT INFORMATION: REGULATIONS ........1-iii Federal Communications Commission (FCC) Declara- tion of Conformity (For U.S.A. only) .......................1-iii Industry Canada Compliance Statement (For Canada only)........................................................................1-iii Declaration of Conformity (Europe)....................... 1-iv Intel Copyright and License Information................ 1-iv Table of Contents ...........................................
Inhaltszusammenfassung zur Seite Nr. 7
Installing the Brother Peer to Peer Software ..............2-6 ® Windows NT 4.0 Printing Associating to the Printer............................................2-7 ® Windows NT 4.0 Printing Adding a Second Brother LPR Port............................2-8 ® Windows NT 3.5x Printing.........................................2-9 ® Windows NT 3.5x Printing (Printer Driver not yet installed) ................................2-10 LAN Server, OS/2 Warp Server Configuration .........2-11 Server Configuratio
Inhaltszusammenfassung zur Seite Nr. 8
® ...............................................5-1 5 Configuring Internet Printing for Windows Internet Printing Installation .............................................. 5-1 Overview..................................................................... 5-1 Brother Internet Print General Information ................. 5-2 Brother Internet Print Configuring the Brother Print Server .......................... 5-3 Print Server Configuration Checklist ...................... 5-3 Brother Internet P
Inhaltszusammenfassung zur Seite Nr. 9
(Queue Server Mode in Bindery emulation mode) using PCONSOLE and BRCONFIG...................................6-14 Configuring the Brother Print Server (Queue Server Mode in NDS mode) using PCONSOLE and BRCONFIG........................................................6-16 Configuring the Brother Print Server (Remote Printer Mode) using PCONSOLE and BRCON- FIG............................................................................6-19 Other Sources of Information.............................
Inhaltszusammenfassung zur Seite Nr. 10
Installation on Other Host Computers ...................... 9-10 10 BANYAN VINES Network Configuration10-1 Printing from Banyan Vines Systems ............................. 10-1 Overview................................................................... 10-1 Necessary items to use a Brother print server on a VINES network ...................................... 10-1 File Server User Console ......................................... 10-2 File Server Queue Configuration............................
Inhaltszusammenfassung zur Seite Nr. 11
13 Troubleshooting..................................................................13-1 Overview...................................................................13-1 Installation problems.................................................13-1 Intermittent Problems................................................13-4 TCP/IP Troubleshooting ...........................................13-5 UNIX Troubleshooting ..............................................13-6 ® Windows NT/LAN Server (TCP/IP) Troubl
Inhaltszusammenfassung zur Seite Nr. 12
1Unix Printing 1 Printing from Unix/Linux using TCP/IP Overview Brother print servers are supplied with the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. Since virtually all UNIX host computers support TCP/IP, this capability allows a printer to be shared on a UNIX Ethernet network. As with all protocols, TCP/ IP communications can proceed concurrently while other protocols are active, this means that UNIX, NetWare, Apple, and other computers can share the same Br
Inhaltszusammenfassung zur Seite Nr. 13
TCP/IP Brother print servers appear to the network as a UNIX host computer with a unique IP address running the lpd (line printer daemon) protocol. As a result, any host computer that supports the Berkeley remote LPR command can spool jobs to Brother print servers without the need for any special software on the host computer. For special applications, raw TCP ports are also available. Brother print servers also support the FTP protocol. This protocol can be used to send print jobs from Un
Inhaltszusammenfassung zur Seite Nr. 14
General TCP/IP UNIX Host Configuration The configuration process for most UNIX systems is described in the following steps. As this process varies, we recommend that you refer to your system documentation for additional information. 1 Configure the /etc/hosts file on each UNIX host that needs to communicate with the print server. Use your favorite editor to add an entry to the /etc/hosts file containing the IP address and node name of the device. For example: 192.189.207.3 BRN_310107 The ac
Inhaltszusammenfassung zur Seite Nr. 15
Choose one of the available services (a service name will be used in step 3): BINARY_P1 Binary data TEXT_P1 Text data (CR added) You may set up multiple print queues on your UNIX host computer for the same print server, each one with a different service name (for example, one queue for binary graphics jobs and one for text jobs). 3 Configure the /etc/printcap file on each host computer to specify the local print queue, the print server name (also called remote machine or rm), and the prin
Inhaltszusammenfassung zur Seite Nr. 16
Make sure this information is added to the end of the printcap file. Also make sure that the last character in the printcap file is a colon ":". This will create a queue named laser1 on the host computer that communicates to a Brother print server with a node name (rm) of BRN_310107 and a service name (rp) of TEXT_P1 printing text files to a Brother printer through spool directory /usr/spool/lpd/laser1. If you are printing binary graphics files, you would use the service BINARY_P1 instea
Inhaltszusammenfassung zur Seite Nr. 17
If you have an HP/UX system, IBM RS/6000 AIX computer, or Sun Solaris 2.xx, there is no printcap file. This is also true for some other AT&T-based UNIX systems, as well as many VMS-based TCP/IP software packages (for example, UCX, TGV Multinet, etc.). On SCO systems, there is a printcap file, but it is automatically configured by the rlpconf command. Most of these systems generally use a printer setup program to define the service name (remote printer), the print server name (remote machi
Inhaltszusammenfassung zur Seite Nr. 18
HP/UX Configuration In the case of HP/UX10.xx, the sam program is used to set up the remote printer. The steps are as follows: 1 Execute the sam program. From the list of options, select Printers and Plotters. 2 Select LP Spooler. 3 Select Printers and Plotters. 4 Select Actions and then Add Remote Printer/Plotter. 5 Enter any name as the Printer Name (this will be the name of the print queue). 6 Enter the IP address of the print server as the Remote System Name. 7 Enter the desired print se
Inhaltszusammenfassung zur Seite Nr. 19
Earlier versions of HP/UX use similar procedures to 10.xx users: 1 Enter sam and select Peripheral Devices and then Add Remote Printer (not Networked printer). 2 Enter the following remote printer settings (the other settings do not matter): n Line printer name (user-selectable). n Remote system name (the print server name; must match what is in hosts file or use print server IP address). n Remote printer queue (Printserver binary or text service name, e.g. BINARY_P1 or TEXT_P1). n Remote P
Inhaltszusammenfassung zur Seite Nr. 20
The procedure for pre-V4.0 systems is as follows. 1 Enter smit and select devices. 2 Select printer/plotter. 3 Select manage remote printer subsystem. 4 Select client services. 5 Select remote printer queues. 6 Select add a remote queue. 7 Enter the following remote queue settings: n Name of queue to add (user selectable). n Activate the queue (Yes). n Destination host (print server name; must match name in / etc/hosts file or use the print server IP address) n Name of queue on remote printer (p
