Inhaltszusammenfassung zur Seite Nr. 1
Programmer’s Reference Manual
KSSM Emulation For The
P7000 H-Series Of Line Matrix Printers
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
KSSM Emulation For The P7000 H-Series Of Line Matrix Printers Programmer’s Reference Manual
Inhaltszusammenfassung zur Seite Nr. 4
Printronix, Inc. makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, Inc. shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in thi
Inhaltszusammenfassung zur Seite Nr. 5
Table Of Contents 1 Introduction............................................................. 9 About This Manual....................................................................................9 Warnings And Special Information.....................................................9 Related Product Information ..............................................................9 Software Features ....................................................................................9 2 Configuring
Inhaltszusammenfassung zur Seite Nr. 6
Table Of Contents Define User-Defined Chinese Character..........................................41 Delete Last Character in Buffer........................................................41 Divided Hangul Double Height .........................................................42 Enable Printing of Upper Control Codes ..........................................42 Enable Upper Control Codes ...........................................................43 Font Expansion .................................
Inhaltszusammenfassung zur Seite Nr. 7
Table Of Contents Cancel Double-width Printing in DBCS Mode (One Line) ........................................................................................61 Select DBCS Mode ..........................................................................62 Cancel DBCS Mode .........................................................................62 Select Hangul Myunjo/Gothic Style..................................................62 Select Italic Font..............................................
Inhaltszusammenfassung zur Seite Nr. 8
Table Of Contents Turn Extending Table Character On/Off ..........................................78 Turn On/Off OCRB Selection ...........................................................78 Turn Proportional Mode On/Off........................................................79 Turn Underline On/Off......................................................................79 Turn Underline On/Off (Hangul Extension) ......................................80 A Standard ASCII Character Set .............
Inhaltszusammenfassung zur Seite Nr. 9
1 Introduction About This Manual This manual is designed so you can quickly find the information you need to operate your printer with the Korean Standard (KS) emulation. This book does not explain how to operate the printer. For printer operation, see the User’s Manual. Warnings And Special Information Read and comply with all information highlighted under special headings: WARNING Conditions that could harm you. CAUTION Conditions that could damage the printer or related equipment. IMPORTAN
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 1 Software Features 10
Inhaltszusammenfassung zur Seite Nr. 11
2 Configuring With The Control Panel Introduction IMPORTANT Configuration directly affects printer operation. Do not change the configuration of your printer until you are thoroughly familiar with the procedures in this chapter. In order to print data, the printer must respond correctly to signals and commands received from the host computer. Configuration is the process of matching the printer's operating characteristics to those of the host computer and to specific tasks, such as printin
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 2 Printing The Configuration Printing The Configuration * = Factory Default CONFIG. CONTROL Load Config. Save Config. Print Config. Delete Config. Power-Up Protect Config. Configs. Current Short* Current Full Factory Power-Up All 1 2 3 4 5 6 7 8 Name Reset Cfg. Configs. Names It is recommended you print a configuration to determine what is already stored and what needs to be modified. You can print any or all of the configurations shown above. Configurations 1-8 are the customized c
Inhaltszusammenfassung zur Seite Nr. 13
Table 1. Printing Configurations Step Key Result Notes 1. Make sure the printer is on. 2. ON LINE/CLEAR OFFLINE QUICK SETUP 3. Allows you to make configuration ENTER SWITCH changes. UNLOCKED + OFFLINE QUICK SETUP 4. OFFLINE CONFIG. CONTROL 5. CONFIG. CONTROL Load Config. 6. CONFIG. CONTROL Print Config. UNTIL 7. Print Config. Current Short* 8. Press until the desired option Print Config. displays. All OR 9. The configuration listing begins ENTER OFFLINE printing. CONFIG. CONTROL 10. Carefull
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 2 Printing The Configuration Table 1. Printing Configurations (continued) Step Key Result Notes 11. Locks the ENTER key. ENTER SWITCH LOCKED + 12. ON LINE/CLEAR ONLINE 13. Store the printout in a safe place. The printer is ready for operation. NOTE: Another way to print the current configuration is to go OFFLINE, press the PRT CONFIG key, and then press ENTER. 14
Inhaltszusammenfassung zur Seite Nr. 15
The Configuration Menu OFFLINE HOST PRINTER EMULATION QUICK CONFIG. INTERFACE CONTROL SETUP CONTROL See the See the LinePrinter+ Host Interface See the User’s Manual User’s Manual Printer Protocol Graphic Spd Up User’s Manual KSSM Typeface Character Sets DBCS CPI Define CR Code Select LPI CR Bold Select DBCS ASCII Style Auto LF Ribbon End Point Define LF Code Reset Cmd CFG Ld Printer Select Load Config. 20 CPI Condensed Save Config. Alt Set 80-9F Power-Up Config. CPI/LPI Select Host Command
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 2 The Configuration Menu Moving Within The Configuration Menu The example in Table 2 explains how to change the LPI value. Table 2. Changing Configurations Step Key Result Notes 1. Make sure the printer is on. 2. ON LINE/CLEAR OFFLINE QUICK SETUP 3. Allows you to make configuration ENTER SWITCH changes. UNLOCKED + OFFLINE CONFIG. CONTROL 4. OFFLINE EMULATION UNTIL 5. EMULATION LinePrinter+ 6. LinePrinter+ Printer Protocol 7. LinePrinter+ CPI/LPI Select 8. CPI/LPI Select Select LPI 9.
Inhaltszusammenfassung zur Seite Nr. 17
Moving Within The Configuration Menu Table 2. Changing Configurations (continued) Step Key Result Notes 11. An asterisk indicates the value ENTER Select LPI selected. 8.0 LPI* 12. Use the diagrams on the following pages to navigate your way through the menu. Press or to move vertically; press or to move horizontally and to scroll through the values. Press ENTER to select a value. Press ONLINE/CLEAR, to move to the top of the menu. To SAVE CHANGES AS A CONFIGURATION that is stored in
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 2 The Configuration Menu Saving Your New Configuration * = Factory Default CONFIG. CONTROL Load Config. Save Config. Print Config. Delete Config. Power-Up Protect Config. Configs. 1 2 3 4 5 6 7 8 Name Configs. Reset Cfg. Names After changing all of the necessary parameters, it is recommended you save them as a configuration that can be stored for future use and loaded later. If you do not save your configuration before you power off the printer, all of your parameter changes will b
Inhaltszusammenfassung zur Seite Nr. 19
Saving Your New Configuration Table 3. Saving Configurations Step Key Result Notes 1. If you are already in the configuration menu, go to step 5. 2. ON LINE/CLEAR OFFLINE QUICK SETUP 3. Allows you to make configuration ENTER SWITCH changes. UNLOCKED + OFFLINE QUICK SETUP 4. OFFLINE CONFIG. CONTROL 5. CONFIG. CONTROL Load Config. 6. CONFIG. CONTROL Save Config. 7. Save Config. 1* 8. Press until the desired number Save Config. (1-8) displays. 2 OR NOTE: Do not turn off the printer while Save is
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 2 The Configuration Menu Table 3. Saving Configurations (continued) Step Key Result Notes NOTE: It is recommended you print the configuration. Go to page 13, step 5. If you decide not to print the configuration, then continue with the following steps. 10. Locks the ENTER key. ENTER SWITCH LOCKED + 11. ON LINE/CLEAR ONLINE 12. The printer is ready for operation. 20
