Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
© 2006 Muratec America, Inc. All rights reserved. This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this manual. • MFX-3050 is a model name of Muratec America, Inc.. • Muratec and the Muratec logo are trademarks of Muratec America, Inc. • Centronics is a trademark of Centronics Data Computer Corporation. • PCL and
Inhaltszusammenfassung zur Seite Nr. 3
CONTENTS 1. Introduction Special features ...................................................................................................................................................... 1.1 Printer overview ...................................................................................................................................................... 1.2 Understanding the Status LED ......................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
7. Basic printing Printing a document ................................................................................................................................................ 7.1 Canceling a print job ............................................................................................................................................... 7.1 8. Scanning Scanning basics ...................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 5
13. Maintenance Printing reports ...................................................................................................................................................... 13.1 Cleaning your machine ......................................................................................................................................... 13.2 Maintaining the toner cartridge ..................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 6
17 The Power cord supplied with your machine should be used for safe operation. If Important Precautions and Safety Information you are using a cord which is longer than 2 m with 110 V machine, then it should When using this machine, these basic safety precautions should always be followed to 1 be 16 AWG or bigger. reduce risk of fire, electric shock and injury to people: * 18 Use only No.26 AWG or larger telephone line cord. 1 Read and understand all instructions. 19 SAVE THESE INSTRUCTIONS.
Inhaltszusammenfassung zur Seite Nr. 7
television reception, which can be determined by turning the equipment off and on, the Mercury Safety user is encouraged to try to correct the interference by one or more of the following LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE measures: RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR • Reorient or relocate the receiving antenna. FEDERAL LAWS. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from
Inhaltszusammenfassung zur Seite Nr. 8
WARNING: FCC Regulations state that changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. In the event that terminal equipment causes harm to the telephone network, the telephone company should notify the customer that service may be stopped. However, where prior notice is impractical, the company may temporarily cease service, providing that they: a) promptly notify the customer. b) give the custom
Inhaltszusammenfassung zur Seite Nr. 9
Limited warranty 1 This warranty is made by Muratec America, Inc. (hereafter referred to as “Muratec”). This warranty is valid only on Muratec products purchased and used in the United States of America. This warranty applies to the product only while owned and used by the original purchaser (“Customer”). If ownership of the product is transferred, this 2 warranty terminates. This warranty does not apply to any product in use for rental purposes. This Muratec product is warranted against de
Inhaltszusammenfassung zur Seite Nr. 10
4. Muratec will not be required to make adjustments, repairs or replacements if the prod- uct is installed or used at a location deemed by Muratec to be hazardous to health or safety, or if Muratec is not provided with free and reasonable access to the product and a telephone during service availability hours, or if the product location is not acces- sible by an authorized Muratec service vehicle. EXCEPT AS EXPRESSLY SET FORTH ABOVE, AND EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, MURA
Inhaltszusammenfassung zur Seite Nr. 11
Expand your machine’s capacity • TheMFX-3050 has 96 MB of memory which can be 1 Introduction expanded to 320 MB. Thank you for purchasing this Muratec multifunctional product. Your machine provides printing, copying, scanning, and faxing • You can add a 250-sheet optional tray 2 to your functions. machine. This tray lets you add paper to the machine less often. This chapter includes: • Zoran IPS Emulation* compatible with PostScript 3 • Special features (PS) enables PS printing. • Printe
Inhaltszusammenfassung zur Seite Nr. 12
Printer overview These are the main components of your machine: Front view Rear view * The figure above shows an SCX-5530FN with all available accessories. * The figure above shows an SCX-5530FN with all available accessories. 1 7 control board cover extension telephone socket (EXT) 1 10 ADF (automatic tray 1 1 a document feeder) 2 8 network port duplex unit 2 11 document width guides optional tray 2 3 9 USB port power receptacle 3 12 document input tray multi-purpose tray 4 10 parallel po
Inhaltszusammenfassung zur Seite Nr. 13
Control panel overview MFX-3050 1 13 Speed buttons: Allows you to store frequently-dialed fax numbers Back: Sends you back to the upper menu level. and email addresses and enter them with the touch of a few buttons. 2 14 Shift: Allows you to shift the speed buttons to access numbers 16 Status: Shows the status of your machine. See page 1.5. through 30. 3 15 Address Book: Allows you to store frequently used fax numbers in Darkness: Adjusts the document brightness for the current copy memory or
Inhaltszusammenfassung zur Seite Nr. 14
Understanding the Status LED Finding more information The Status LED on the control panel shows the status of your machine. You can find information for setting up and using your machine from the See the table below to know your machine’s status. following resources, either printed or onscreen. Status Description Quick Install Provides information on setting up your Guide machine and, therefore, be sure to follow Off • The machine is off-line. the instructions in the guide to get the • The
Inhaltszusammenfassung zur Seite Nr. 15
Selecting a location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table. Clearance space • Front: 482,6 mm (enough space so that the paper tray can be removed) • Back: 100 mm (enough space for ventilation) • Right: 100 mm (enough space for ventilation) • Left
Inhaltszusammenfassung zur Seite Nr. 16
2 System setup This chapter gives you an overview of menus available on your machine and step-by-step instructions for setting up the machine’s systems. This chapter includes: • Menu overview • Changing the display language • Setting the date and time • Changing the default mode Menu overview • Setting sounds The control panel provides access to various menus to set up the • Entering characters using the number keypad machine or use the machine’s functions. These menus can be accessed by pre
Inhaltszusammenfassung zur Seite Nr. 17
6 Press OK to save the time and date. Changing the display language When you enter a wrong number, Out of Range appears and the machine does not proceed to the next step. If this happens, simply To change the language that appears on the control panel, follow these reenter the correct number. steps: 7 Press Stop/Clear to return to Standby mode. 1 Press Menu until System Setup appears on the bottom line of the display and press OK. Changing the clock mode 2 Press OK when Machine Setup appear
Inhaltszusammenfassung zur Seite Nr. 18
Setting sounds Entering characters using the number keypad You can control the following sounds: As you perform various tasks, you may need to enter names and numbers. For example, when you set up your machine, you enter your • Key Sound: Turns the key sound on or off. With this option set to On, name or your company’s name, and the fax number. When you store fax a tone sounds each time a key is pressed. numbers or email addresses in memory, you may also enter the • Alarm Sound: Turns the a
Inhaltszusammenfassung zur Seite Nr. 19
Correcting numbers or names Scan Power Save mode If you make a mistake while entering a number or name, press the left Scan Power Save mode allows you to save power by turning off the scan Scroll button to delete the last digit or character. Then enter the correct lamp. The scan lamp under the scanner glass automatically turns off number or character. when it is not in actual use to reduce power consumption and extend the life of the lamp. The lamp automatically wakes up after some warm-up t
Inhaltszusammenfassung zur Seite Nr. 20
CD Contents 3 Software overview PostScript Windows • Postscript Printer Description This chapter gives you an overview of the software that comes with your printer driver (PPD) file: Use the PostScript driver machine. Further details about installing and using the software are CD to print documents with complex explained in the Software Section. fonts and graphics in the PS language. This chapter includes: • User’s Guide in PDF • Supplied software • Printer driver features Macintosh • Pos
