Inhaltszusammenfassung zur Seite Nr. 1
Operator Manual
LP222cn LP222cn LP222cn LP222cn
Printer Operator Guide
your document management partner
Inhaltszusammenfassung zur Seite Nr. 2
Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. Power Source 120 V, 60 Hz, 11 A or more Please be sure to connect the power cable to a power source as above. Laser Safety: This machine is considered class I laser device, safe for office/ EDP use. The machine contains 5 mil- liwatt, 770 - 795 nanometer
Inhaltszusammenfassung zur Seite Nr. 3
Safety Information When using your printer, the following safety precautions should always be fol- lowed. In this manual, the following important symbols are used: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. R WARNING: • Confirm the wall outlet is near the machine a
Inhaltszusammenfassung zur Seite Nr. 4
R CAUTION: • Place no objects on the right cover. Do not pull out the paper tray forcefully. If you do, the tray might fall and cause an injury. The inside of this printer becomes very hot. Do not touch parts labelled “v” (indicating a hot surface). Touching these parts will result in burns. Do not handle the plug with wet hands. Doing so might cause an electrical shock. Keep the machine in an area that is within optimum environmental condi- tions. Operating the machine in an enviro
Inhaltszusammenfassung zur Seite Nr. 5
R CAUTION: When removing misfed paper, do not touch the fusing unit because it could be very hot. The printer weights approximately 32 kg (70.5 lb.). When moving the print- er, use the inset grips on both sides, and lift slowly. The printer will break or cause injury if dropped. Before installing options, the machine should be turned off and unplugged for at least half an hour. Components inside the machine become very hot, and can cause a burn if touched. Lifting the paper feed un
Inhaltszusammenfassung zur Seite Nr. 6
Positions of RWARNING and RCAUTION labels This machine has labels for RWARNING and RCAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated. AJT086S High temperature parts. Turn off the main power and be careful when replac- ing fusing unit / removing misfed paper. The inside of this printer becomes very hot. Do not touch parts labelled “v” (indicating a hot surface). Touching these parts will result in burns. The inside of this pr
Inhaltszusammenfassung zur Seite Nr. 7
In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. b means POWER OFF. Note to users in the United States of America Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu- ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio freq
Inhaltszusammenfassung zur Seite Nr. 8
Note to users in Canada Note: This Class B digital apparatus complies with Canadian ICES- 003. IEEE 802.11b Interface Unit Type H (R-WL11B): This device complies with RSS 210 of Industry Canada. To prevent radio interference to the licensed service, this device must be operated indoors only and should be kept away from windows to provide maximum shielding. Remarque concernant les utilisateurs au Canada Avertissement: Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
Inhaltszusammenfassung zur Seite Nr. 9
Note to Administrator This manual is intended to provide administrators with additional information about the security functions of this printer. Read this manual as well as Setup Guide and Software Guide. This manual and its contents should be kept by, and restricted to, administra- tors. Password When you log into this printer, you will be prompted to enter the user name and password for your account. We strongly recommend you change the factory de- fault user name and create a password immedi
Inhaltszusammenfassung zur Seite Nr. 10
This printer comes with the following administrator menus: ❖ Administrator menus under [Maintenance]: Menu Protect List Print Lock File Locking Unlock Files Note ❒ The ”File Locking” and “Unlock Files” menus are displayed when the op- tional hard disk is installed. ❖ Administrator menus under [Host Interface]: USB Setting Bluetooth Note ❒ [Bluetooth] is displayed when the optional Bluetooth interface unit is installed. Displaying administrator menus You can display the administrator me
Inhaltszusammenfassung zur Seite Nr. 11
D Press the {U} or {T} key to check the administrator menus including [Menu Protect] and [List Print Lock] are displayed. You can now display the administrator menus and make any necessary changes to the settings. E Press the {Online} key after completing all the required settings. The initial screen appears, preventing you from displaying the administrator menus. To display the administrator menus again, repeat the procedures from the start. Maintenance menu parameters (administrator menu) ❖ Me
Inhaltszusammenfassung zur Seite Nr. 12
❖ Unlock Files You can unlock a file that was locked due to a user entering a wrong pass- word 10 times. Host Interface menu parameters (administrator menu) ❖ USB Setting You can specify the USB communication speed. Full Speed You can set the communication speed of USB to USB1.1. Auto Note ❒ Default: Auto ❖ Bluetooth You can set the operating mode of Bluetooth. Public Private Note ❒ Default: Public ❒ This menu item is displayed if the optional Bluetooth interface unit is in- stalled. ❒ If
Inhaltszusammenfassung zur Seite Nr. 13
Setup Guide Read This First Trademarks.............................................................................................................3 Safety Information .................................................................................................4 Positions of RWARNING and RCAUTION labels ..............................................8 ENERGY STAR Program .......................................................................................9 How to Read This Manual ..........
Inhaltszusammenfassung zur Seite Nr. 14
Adjusting the Image Density...............................................................................42 Installing Options Available Options.................................................................................................44 Option Installation Flow Chart..................................................................................44 Installing Options......................................................................................................45 Attaching Paper F
Inhaltszusammenfassung zur Seite Nr. 15
Read This First Trademarks Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. IPS-PRINT Printer Language Emulation Copyright© 1999-2000 Oak Technolo- gy, Inc., All rights reserved. ® Bluetooth is a registered trademark of the Bluetooth SIG, Inc. worldwide. Other product names used herein are for identification purposes only and might be trademarks of their respective companies. We disclaim any and all rights to those
Inhaltszusammenfassung zur Seite Nr. 16
Read This First Safety Information When using your printer, the following safety precautions should always be fol- lowed. In this manual, the following important symbols are used: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. 4
Inhaltszusammenfassung zur Seite Nr. 17
Read This First • Confirm the wall outlet is near the machine and freely accessible, so that in the event of emergency, it can be unplugged easily. Plug and unplug the power cable with dry hands, or an electric shock could occur. Only connect the machine to the power source described in the man- ual. Avoid multi-wiring. Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more than nec- essary. These actions coul
Inhaltszusammenfassung zur Seite Nr. 18
Read This First Place no objects on the right cover. Do not pull out the paper tray forcefully. If you do, the tray might fall and cause an injury. The inside of this printer becomes very hot. Do not touch parts labelled “v” (indicating a hot surface). Touching these parts will result in burns. Do not handle the plug with wet hands. Doing so might cause an electrical shock. Keep the machine in an area that is within optimum environmental condi- tions. Operating the machine in an e
Inhaltszusammenfassung zur Seite Nr. 19
Read This First When removing misfed paper, do not touch the fusing unit because it could be very hot. The printer weights approximately 32 kg (70.5 lb.). When moving the print- er, use the inset grips on both sides, and lift slowly. The printer will break or cause injury if dropped. Before installing options, the machine should be turned off and unplugged for at least half an hour. Components inside the machine become very hot, and can cause a burn if touched. Lifting the paper fe
Inhaltszusammenfassung zur Seite Nr. 20
Read This First Positions of RWARNING and RCAUTION labels This machine has labels for RWARNING and RCAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated. High temperature parts. Turn off the main power and be careful when replac- ing fusing unit / removing misfed paper. The inside of this printer becomes very hot. Do not touch parts labelled “v” (indicating a hot surface). Touching these parts will result in burns. The inside of
