Inhaltszusammenfassung zur Seite Nr. 1
Table of Contents
Users Manual
Kyocera Laser Printer
FS-6700
Inhaltszusammenfassung zur Seite Nr. 2
Introduction Caution NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION. Notice on Software SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER’S NATIVE MODE OR ONE OF ITS EMULATION MODES. The printer is factory set to emulate the HP LaserJet 5M. The emulation mode can be changed by following the procedures described in Chapter 2. Notice The information in this manual is subject to change without notification. Additional pages may be inserted in future editions. The user
Inhaltszusammenfassung zur Seite Nr. 3
Introduction IBM PROGRAM LICENSE AGREEMENT THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS (“PROGRAMS”) WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION (“IBM”). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND. IF YOU DO NOT SO RETURN THE DEVI
Inhaltszusammenfassung zur Seite Nr. 4
Introduction 3. Limitation of Remedies IBM’s entire liability under this license is the following; 1) For any claim (including fundamental breach), in any form, related in any way to this license, IBM’s liability will be for actual damages only and will be limited to the greater of: a) the equivalent of U.S.$25,000 in your local currency; or b) IBM’s then generally available license fee for the Program This limitation will not apply to claims for bodily injury or damages to real or tangible pers
Inhaltszusammenfassung zur Seite Nr. 5
Introduction Typeface Trademark Acknowledgement All resident fonts in this printer are licensed from Bitstream Inc., Cambridge, Massachusetts, U.S.A. Dutch801, Swiss742, Incised901, ZapfCalligraphic801, ZapfHumanist601, OriginalGaramond, and Chianti are trademarks of Bitstream Inc. Century Schoolbook, Stymie, and Cooper-Black are trademarks of Kingsley-ATF Type Corporation. ITC Avant Garde, ITC Benguiat, ITC Bookman, ITC Souvenir, ITC Zapf Chancery, and ITC ZapfDingbats are registered trademarks
Inhaltszusammenfassung zur Seite Nr. 6
Introduction FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection aga
Inhaltszusammenfassung zur Seite Nr. 7
Introduction To use equipment which does not comply with FCC rules is prohibited. The printer may be optionally installed with the following units: Conforming to the Class B limits DU-25 Duplexer HD-1 Hard Disk Unit PF-25 Paper Feeder (B5 to Ledger) vi l l l
Inhaltszusammenfassung zur Seite Nr. 8
Introduction Interface connectors Important note on the interface connectors Be sure to turn off printer power before connecting or disconnecting an interface cable* to the printer. For protection against static discharge which may be applied to the printer’s internal electronics through the interface connector(s), keep any interface connector which is not in use capped using the protective cap supplied. * Use shielded interface cable. Safety information Laser safety This printer is certified as
Inhaltszusammenfassung zur Seite Nr. 9
Introduction CAUTION Laser Radiation when remove the Laser Scanner Unit Cover in the printer. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. * Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. (Philippines) (U.S.A./Canada) (Europe/Asia) Label on the Printer’s Rear Panel Label Inside the Rear Cover viii
Inhaltszusammenfassung zur Seite Nr. 10
Introduction Ozone concentration The printer generates ozone gas (O ) which may concentrate in the place of installation and cause 3 an unpleasant smell. To minimize concentration of ozone gas to less than 0.1 ppm, we recommend you not to install the printer in a confined area where ventilation is blocked. ix
Inhaltszusammenfassung zur Seite Nr. 11
Introduction IMPORTANT SAFEGUARDS 1. Read all of these instructions and save these instructions for later use. 2. Unplug this product from the wall outlet before cleaning. 3. Do not use this product near water. 4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 5. Slots and openings in the cabinet and the back are provided for ventilation to ensure reliable operation of the product and to protect it from overheating, th
Inhaltszusammenfassung zur Seite Nr. 12
Introduction 11. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A - When the power cord or plug is damaged or frayed. B - If liquid has been spilled into the product. C -If the product has been exposed to rain or water. D -If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other cont
Inhaltszusammenfassung zur Seite Nr. 13
e 89/336/EEC and 73/23/EEC Introduction CE Marking Directive according to Council Directive 89/336/EEC and 73/23/EEC Manufacturer’s name: Kyocera Corporation, Printer Division Manufacturer’s address: 2-14-9 Tamagawadai, Setagaya Ward, Tokyo 158-8610, Japan declares that the product Product name: Page Printer Model number: FS-6700 (as tested with enhancement optional units: PF-25, DU-25, and HD-1) conforms to the following product specifications. EN 55 022:1994 Class B EN 61 000-3-2:1995 EN 50 08
Inhaltszusammenfassung zur Seite Nr. 14
Introduction Declaration of Conformity (Australia) Manufacturer’s name: Kyocera Corporation, Printer Division Manufacturer’s address: 2-14-9 Tamagawadai, Setagaya Ward, Tokyo 158-8610, Japan declares that the product Product name: Page Printer Model number: FS-6700 (as tested with enhancement optional units: as PF-25, DU-25, and HD-1) Conforms to the following product specifications. AS/NZS 3548: 1995 (EN 55 022:1994 Class B) IEC 60 950-1 (EN 60 950-1:1992+A1+A2+A3+A4) IEC 60 825-1 (EN 60 825-1:
Inhaltszusammenfassung zur Seite Nr. 15
Introduction Canadian Department of Communications compliance statement This Class B digital apparatus complies with Canadian ICES-003. Avis de conformité aux normes du ministère des Communications du Canada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. ISO 7779 Maschinenlärminformationsverordnung 3. GSGV, 18.01.1991: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß ISO 7779. Safety & EMI Requirements IEC IEC950:1991 (+A1+A2+A3+A4) / (IEC825-1
Inhaltszusammenfassung zur Seite Nr. 16
Introduction Disclaimer We shall have no liability or responsibility to customers or any other person or entity with respect to any liability, loss or damage caused or alleged to be caused directly or indirectly by equipment sold or furnished by us, including but not limited to, any interruption of service, loss of business or anticipatory profits, or consequential damages resulting from the use or operation of the equipment or software. Prolonged Non-Use and Moving the Printer Prolonged Non-use
Inhaltszusammenfassung zur Seite Nr. 17
Introduction Note The magnet roller of the developer unit includes a powerful magnet. Do not allow wrist watches, floppy disks, credit cards or magnetic cards near the roller. 1. Remove the developer unit. 1 Remove the connector. 3 Remove the developer unit. 2 Press here. 2. Place the developer unit in the protective package for transportation. Plastic Bag Protective Package for Transportation Note Place the toner container and waste toner bottle in the plastic bag included in the toner kit. xv
Inhaltszusammenfassung zur Seite Nr. 18
Introduction SM ENERGY STAR As an ENERGY STAR Partner, Kyocera Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The basic objective of the ENERGY STAR Program is to reduce environmental pollution by encouraging the manufacture and sale of equipment that uses energy more efficiently. This printer is equipped with a sleep timer function that conforms with the standards of the ENERGY STAR Program. This function makes it possible to reduce the amou
Inhaltszusammenfassung zur Seite Nr. 19
Introduction Kyocera ECO-PRODUCT This product has been developed and manufactured with the express interest of reducing the impact on the environment. Using Kyocera's innovative cartridge free technology, Kyocera has created an advanced printing system that does not require the wasteful replacement and disposal of a cartridge. xviii
Inhaltszusammenfassung zur Seite Nr. 20
Introduction Introduction The Kyocera laser printer has many extremely desirable features. It was designed to make a contribution to a cleaner environment as well as to represent the latest generation of page printer technology. Superb print quality With an amorphous silicon drum, microfine ceramic toner, and the latest technology from Kyocera such as KIR (Kyocera Image Refinement) function*, this laser printer delivers superb print quality and clarity. (*See page 2-31.) Ultra long life modules
