Inhaltszusammenfassung zur Seite Nr. 1
Infoprint Color 1454 & 1464
Setup Guide
S510-4059-00
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Infoprint Color 1454 & 1464 Setup Guide S510-4059-00
Inhaltszusammenfassung zur Seite Nr. 4
Edition: June 2004 Federal Communications Commission (FCC) compliance information statement Lexmark and MarkNet are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. This printer complies with the limits for a Class B digital device (without a network ImageQuick is a trademark of Lexmark International, Inc. cable or high-capacity output finisher installed) and for a Class A digital device (with a network cable or high-capacity output finishe
Inhaltszusammenfassung zur Seite Nr. 5
Contents Step 1: Choose your setup (local or network printer) . . . . . . . . . . . . . . . . . . . . . . . . 7 Local printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Network printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Step 2: Install drivers for local printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Windows . . . .
Inhaltszusammenfassung zur Seite Nr. 6
Step 12: Other sources of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Viewing and using the publications CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Contents 6
Inhaltszusammenfassung zur Seite Nr. 7
Step 1: Choose your setup (local or network printer) Local printer A local printer is a printer attached to your computer using a USB or parallel cable. The local printer is intended to be used by the computer to which it is attached. If you are attaching a local printer, you must install the printer driver on your computer before setting up your printer. Continue with Step 2: “Install drivers for local printing” on page 7. Network printer A network printer is a printer attached to a network
Inhaltszusammenfassung zur Seite Nr. 8
Note: Some Windows operating 3 Click Printer and Software. systems require that you have 4 Click Agree to accept the license agreement. administrative access to install printer 5 Select Suggested, and then click Next. drivers on your computer. The Suggested option is the default installation for local and network-attached setup. If you need to install utilities, change settings, or customize device drivers, select Custom, and follow the instructions on your screen. 6 Select Local Attached, a
Inhaltszusammenfassung zur Seite Nr. 9
UNIX/Linux Local printing is supported on many UNIX and Linux platforms, such as Sun Solaris and Red Hat. Note: If your drivers CD does not Some printer driver packages are available on the drivers CD. The User’s Guide in each contain any UNIX/Linux printer driver package gives detailed instructions for installing and using printers in UNIX and Linux packages, contact the place you environments. purchased your printer to see if your All the printer driver packages support local printing usin
Inhaltszusammenfassung zur Seite Nr. 10
Note: Leave the printer in the box until 2 Remove all items except the printer from the box. you are ready to install it, then have Make sure you have the following items: someone help you lift it using the handholds (see “Positioning the printer” on page 13). (1) Printer with one 500-sheet tray (2) Four print cartridges (preinstalled) 1 (3) Setup Guide with a publications CD (4) Drivers CD (5) Power cord 2 If any items are missing or damaged, contact the place you purchased your printer for
Inhaltszusammenfassung zur Seite Nr. 11
Printer setup If you only purchased a base printer with no options, follow the directions under “Positioning the printer” on page 13. Note: Be sure to set up the items in the Use the following table to locate the instructions you need to set up your printer and any order listed in the table. paper handling options you may have purchased. Topic Go to page... Installing a 2000-sheet drawer 11 Installing a 500-sheet drawer 12 Installing a duplex unit 13 Positioning the printer 13 Installing an ou
Inhaltszusammenfassung zur Seite Nr. 12
Installing a 500-sheet Your printer supports up to three additional 500-sheet drawers. However, if you install a 2000-sheet drawer, you can only add one additional 500-sheet drawer. drawer Warning: If you have an optional 1 Unpack the 500-sheet drawer and remove any packing material. duplex unit and a 2000-sheet drawer, you must install a 500-sheet drawer between the duplex unit and the 2000-sheet drawer. 2 Place the drawer in the location you have chosen for your printer or install it on a
Inhaltszusammenfassung zur Seite Nr. 13
Installing a duplex unit Your printer supports an optional duplex unit that lets you print on both sides of a sheet of paper. Warning: If you have an optional 1 Unpack the duplex unit and remove any packing material. duplex unit and a 2000-sheet drawer, you must install a 500-sheet drawer between the duplex unit and the 2000-sheet drawer. 2 Place the duplex unit in the location you have chosen for your printer or install it on a 500-sheet drawer: a Align the positioning posts on the drawer
Inhaltszusammenfassung zur Seite Nr. 14
2 Have someone help you place the printer in the location you have chosen. If you are installing the printer on an optional drawer or a duplex unit, align the positioning posts on the option with the holes in the printer. Make sure the printer is seated securely on the option. 3 Remove any tape or packing material from the outside of the printer. 4 If you purchased an output expander or mailbox, continue with this chapter. Otherwise, skip to Step 5: “Set up the print supplies” on page 16. Inst
Inhaltszusammenfassung zur Seite Nr. 15
5 Attach the printer top cover to the output expander. 6 Attach the output expander paper bail to the top cover. 7 Go to Step 5: “Set up the print supplies” on page 16. Installing a 5-bin mailbox Your printer supports a 5-bin mailbox that lets you collate and stack up to 500 sheets of paper. Note: After you unpack the mailbox, 1 Unpack the mailbox and remove any packing material. install it immediately. Otherwise, the 2 Remove the printer top cover. edges of the mounting brackets could damage
Inhaltszusammenfassung zur Seite Nr. 16
5 Attach the printer top cover to the mailbox. 6 Attach the mailbox paper bail to the top cover. Step 5: Set up the print supplies Warning: Be sure to remove all This step describes how to prepare the print cartridges and remove the packing packing materials or the printer may be materials inside the printer. damaged. Setting up the print 1 Open the printer front cover. cartridges 2 Remove the packing material on top of the cartridges. Set up the print supplies 16
Inhaltszusammenfassung zur Seite Nr. 17
3 Remove the print cartridges. For each cartridge: a Pull up on the handhold. b Pull the cartridge straight out and use the handle to lift it off the guides. c Set the cartridge on a firm, flat, clean surface in the upright position. b a c Warning: Do not touch the image 4 Remove the packing material from the image transfer unit belt: transfer unit belt with your fingers. a Grasp the detensioner located on the right side on the inside of the machine. b Gently but firmly pull up on the detensione
Inhaltszusammenfassung zur Seite Nr. 18
Warning: Failure to remove the c Turn the cartridge so the handle is on the top. packing material from the print cartridges d Rotate the cartridge in all directions to distribute the toner. damages the printer. Warning: Do not touch the e Holding the cartridge by the handle, rest the spokes on the cartridge as photoconductor drum on the bottom of shown. the print cartridge. Be sure to match the cartridge color with the colored label in the printer. c e d f Slide the cartridge in as far as
Inhaltszusammenfassung zur Seite Nr. 19
Attaching an operator If English is not your preferred language and your printer shipped with an adhesive operator panel overlay, attach the overlay that has the appropriately translated button panel overlay names: 1 Locate the overlay packaged with your printer. 2 Peel the protective backing off the overlay. 3 Align the holes in the overlay with the buttons on the operator panel, and then press it into place. 4 Peel the protective covering away from the overlay. Refer to the User’s Guide on
Inhaltszusammenfassung zur Seite Nr. 20
Removing the system 1 Locate the access cover on the back of the printer. board access cover 2 Remove the four access cover screws (two at top, two at bottom). 3 Remove the access cover. 4 Use the illustration to locate the connector for the card you want to install. Option card connector Memory card connector Firmware and flash memory card connectors Hard disk connector 5 Use the following table to locate the instructions you need. To install a... Go to page... Memory card 21 Firmware card
