Bedienungsanleitung Fujitsu FTP-632MCL301

Inhaltszusammenfassung zur Seite Nr. 1

NOT FOR NEW
DESIGN
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
3” MECHANISM, WITH CUTTER
FTP-632MCL301/302
n OVERVIEW
FTP-632MCL/FTP-622DCL/DSL Series is an ultra high speed
line thermal printer driven by 24 VDC, printing on 3-inch wide
paper (80 mm/85 mm).
This printer is compact and light weight, and the design allows
easy head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, l

Inhaltszusammenfassung zur Seite Nr. 2

NOT FOR NEW DESIGN FTP-632MCL301/302 n DESIGNATION Item Part number *1 Printer mechanism With Auto cutter FTP-632MCL301/302 *2 Centronics Standard with Auto cutter FTP-622DCL011/111 Interface board *3 Serial (RS-232C) FTP-622DSL011/012 *4 LSI(MCU) FTP-622CU101 *1: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear paper insertion (straight path). *2: 011 supports ANK and 101 supports ANK + Kanji. *3: 012 supports ANK and 111 supports AN

Inhaltszusammenfassung zur Seite Nr. 3

NOT FOR NEW DESIGN FTP-632MCL301/302 (Continued) Item Specifications Part number FTP-632MCL301/302 TM Interface Centronics (ESC/POS ), RS232C 24 VDC ± 5%, Voltage 2 * Current : average ( ): Peak For head 1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio) 0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio) 0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio) Power supply For motor 24 VDC ± 5%, 1.0 A maximum For cutter 24VDC ± 5%, 1.0 A maximum For logic 5 VDC

Inhaltszusammenfassung zur Seite Nr. 4

2—M 3 burring (FIXING HOLE FROM BOTTOM SIDE) NOT FOR NEW DESIGN FTP-632MCL301/302 Mechanism with cutter 3—M 3(FIXING HOLE FROM UPPER SIDE) MCL301 MCL302 – – – 63.4 76.8(POSITIONING H0LE) 58.2 117.5 – 1 (60.5) 57 (78.6) Note: all dimensions are nominal value. Unit: mm 4 15 300 3–2.0 or less 42 14.2 1 67.7 13.3 (2 or less) 38.5 2 or less (70.8) 15 235

Inhaltszusammenfassung zur Seite Nr. 5

NOT FOR NEW DESIGN FTP-632MCL301/302 Interface board 130.8 120.7 116.8 87.6 19.1 5.1 5.1 CN2** CN5 CN3 4—ø3.6 CN10 CN11* CN13 5.1 5.1 43.2 86.4 105.4 120.7 *CN11 on FTP-622DCL011/111 & 622DSL011/012/112 only Unit: mm **CN2 on FTP- 622DSL only n FUNCTION ITEM ITEM 1. Test printing 8. Cutter trouble detection 2. Paper-out detection 9. Motor power save 3. Paper near end detection 10. Mark detection 4. Head-up detection 11. MCU trouble detection 5. Abnormal temperature detection of thermal head 1

Inhaltszusammenfassung zur Seite Nr. 6

NOT FOR NEW DESIGN FTP-632MCL301/302 Japan Europe Fujitsu Components Europe B.V. Fujitsu Component Limited Gotanda-Chuo Building Diamantlaan 25 2132 WV Hoofddorp 3-5, Higashigotanda 2-chome, Shinagawa-ku Netherlands Tokyo 141, Japan Fujitsu Components Tel: (81-3) 5449-7010 Tel: (31-23) 5560910 International Fax: (31-23) 5560950 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Email: info.marketing@fceu.fujitsu.com Headquarter Web: www.fceu.fujitsu.com Web: www.fcl.fujitsu.com Offices Nort