Bedienungsanleitung Fujitsu FTP-622MCL301

Inhaltszusammenfassung zur Seite Nr. 1

NOT FOR NEW
DESIGN
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
2” MECHANISM, WITH CUTTER
FTP-622MCL301/302
n OVERVIEW
FTP-622MCL/FTP-622DCL/DSL Series is an ultra high speed line
thermal printer driven by 24 VDC, printing on 2-inch wide paper
(58 mm/60 mm).
This printer is compact and light weight, and the design allows
easy head maintenance, easy head cleaning and easy head
replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon

Inhaltszusammenfassung zur Seite Nr. 2

NOT FOR NEW DESIGN FTP-622MCL301/302 n DESIGNATION Item Part number *1 Printer mechanism With Auto cutter FTP-622MCL301/302 *2 Centronics Standard with Auto cutter FTP-622DCL011/111 Interface board *3 Serial (RS-232C) standard with auto cutter FTP-622DSL011/012 *4 LSI(MCU) FTP-622CU101 *1: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear paper insertion (straight path). *2: 011 supports ANK and 101 supports ANK+Kanji. *3: 012

Inhaltszusammenfassung zur Seite Nr. 3

NOT FOR NEW DESIGN FTP-622MCL301/302 (Continued) Item Specifications Part number FTP-622MCL301/302 TM Interface Centronics (ESC/POS ), RS232C 24VDC ± 5%, Voltage 2 * Current : average ( ): Peak For head 0.87 (1.16) A (at 80 mm/s printing speed, 25% printing ratio) 0.63 (1.16) A (at 50 mm/s printing speed, 25% printing ratio) 0.58 (0.58) A (at 30 mm/s printing speed, 25% printing ratio) Power supply For motor 24VDC ± 5%, 1.0 A maximum For cutter 24VDC ± 5%, 1.0 A maximum For logic 5VDC ± 5%, 0

Inhaltszusammenfassung zur Seite Nr. 4

2-M 3 burring (FIXING HOLE FROM BOTTOM SIDE) NOT FOR NEW DESIGN FTP-622MCL301/302 Mechanism with cutter MCL301 (47.2) 3-M3 FIXING HOLE FROM UPPER SIDE PAPER INSERTION MCL302 – PAPER INSERTION – – 45.0 58.4(POSITIONING HOLE) (97.3) – 1 (49.5) 47.8 (78.6) Note: all dimensions are nominal value. Unit: mm 4 300 15 3—2.0 or less 42 14.2 13.3 1 67.7 38.5 2 or less (2 or less) (70.8) 235 15

Inhaltszusammenfassung zur Seite Nr. 5

NOT FOR NEW DESIGN FTP-622MCL301/302 Interface board 130.8 120.7 116.8 87.6 19.1 5.1 5.1 CN2** CN5 CN3 4—ø3.6 CN10 CN11* CN13 5.1 5.1 43.2 86.4 105.4 120.7 *CN11 on FTP-622DCL011/111 & 622DSL011/012/112 only **CN2 on FTP-622DSL only Unit: mm n FUNCTION ITEM ITEM 1. Test printing 8. Cutter trouble detection 2. Paper-out detection 9. Motor power save 3. Paper near end detection 10. Mark detection 4. Head-up detection 11. MCU trouble detection 5. Abnormal temp. of thermal head detection 12. Power

Inhaltszusammenfassung zur Seite Nr. 6

NOT FOR NEW DESIGN FTP-622MCL301/302 Europe Japan Fujitsu Component Limited Fujitsu Components Europe B.V. Gotanda-Chuo Building Diamantlaan 25 2132 WV Hoofddorp 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Netherlands Fujitsu Components Tel: (31-23) 5560910 Tel: (81-3) 5449-7010 International Fax: (81-3) 5449-2626 Fax: (31-23) 5560950 Email: promothq@ft.ed.fujitsu.com Email: info.marketing@fceu.fujitsu.com Headquarter Web: www.fceu.fujitsu.com Web: www.fcl.fujitsu.com Offices Asia