Inhaltszusammenfassung zur Seite Nr. 1
VEC021/021AC
™
INDUSTRIAL SERIES 900
JUMPSTART SYSTEM & POWER SUPPLY
PORTABLE, CORDLESS, RECHARGEABLE 12-VOLT DC* POWER SUPPLY
COMPLETELY PORTABLE, SAFE & CONVENIENT
*INCLUDES INSTRUCTIONS FOR 110-VOLT AC POWER OPTION
(MODEL VEC023 INVERTER: INCLUDED WITH MODEL VEC021AC; NOT INCLUDED WITH MODEL VEC021)
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS
PRODUCT. BEFORE USE, READ AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. USING THE INDUSTRIAL 900™ AS A JUMPSTART SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Easy, Step-by-Step Jumpstarting Instructions . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 3
i ii WARNINGS CAUTIONS WARNING STATEMENTS IDENTIFY CONDITIONS OR PRACTICES THAT MAY RESULT IN CAUTION STATEMENTS ADVISE AGAINST CERTAIN CONDITIONS AND PRACTICES PERSONAL INJURY OR LOSS OF LIFE. THAT MAY RESULT IN DAMAGE TO VEHICLES, APPLIANCES, THE INDUSTRIAL SERIES 900™ JUMPSTART SYSTEM AND/OR THE POWER FORCE™ INVERTER. •WHEN WORKING WITH LEAD ACID BATTERIES, ALWAYS MAKE SURE IMMEDIATE ASSISTANCE IS AVAILABLE IN CASE OF ACCIDENT OR EMERGENCY. • IMPORTANT: ALTHOUGH THIS UNIT IS DELIVERED IN A P
Inhaltszusammenfassung zur Seite Nr. 4
iii 1 VEC021/VEC021AC INDUSTRIAL SERIES™ 900 JUMPSTART SYSTEM & POWER SUPPLY Congratulations on selecting the Vector™ INDUSTRIAL SERIES™ 900 JUMPSTART SYSTEM & POWER SUP- PLY. Figure 1. Please read this guide carefully before use to ensure optimum performance and avoid damage to the unit or items that you are using it with. 1. 12 VOLT DC CHARGER/ 10. 2. 1. OUTPUT SOCKET, WITH 11. In addition to a built-in 12-volt power supply, the INDUSTRIAL 900™ JUMPSTART SYSTEM has several exclusive OVERLOAD
Inhaltszusammenfassung zur Seite Nr. 5
2 3 Figure 4. Figure 3. IMPORTANT INFORMATION: CAUTION: READ INSTRUCTION MANUAL AND PRODUCT LABELING CAREFULLY, FOR COMPLETE INSTRUCTIONS, BEFORE USING THIS PRODUCT. FOLLOW RECOMMENDED WARNINGS, CAUTIONS, AND 1. SAFETY PROCEDURES, AND MANUFACTURER GUIDELINES FOR YOUR VEHICLE BATTERY. 1. IMPORTANT: ALTHOUGH THIS UNIT IS DELIVERED IN A PARTIALLY-CHARGED STATE—YOU MUST FULLY • CHARGE IT WITH THE SUPPLIED 110-VOLT AC CHARGER FOR A FULL 24 HOURS, BEFORE USING IT FOR THE 4 FIRST TIME. • IMPORTANT
Inhaltszusammenfassung zur Seite Nr. 6
5 4 1. INTRODUCTION 2. USING THE INDUSTRIAL 900™ AS A JUMPSTART SYSTEM The Vector™ INDUSTRIAL SERIES™ 900 JUMPSTART SYSTEM & POWER SUPPLY is a compact, durable and CAUTIONS: portable jump start system for vehicles and boats that have a standard 12-volt DC battery system. This self-con- • Before using this system to jump start any vehicle or boat, read and understand all instructions, safety tips, tained, rechargeable system will start most vehicles and boats without the need for a host vehicle
Inhaltszusammenfassung zur Seite Nr. 7
6 7 NOTE: In the rare event that the vehicle to be started has a Positive Grounded System 3. EMERGENCY/WORK LIGHT (positive battery terminal is connected to chassis): Replace steps I and 2 above with the following steps, and then proceed to steps 4-6 above. Bulb Replacement 1. Connect negative (-) black clamp to vehicle battery ‘s negative terminal. To turn work light on or off, simply toggle the switch on the front control panel. 2. Connect positive (+) red clamp to vehicle chassis or a solid
Inhaltszusammenfassung zur Seite Nr. 8
8 9 WARNING: DO NOT RECHARGE FOR MORE THAN 3-4 HOURS MAXIMUM USING 12-VOLT DC METHOD. 5.1 To Use The Industrial 900™ System As A 12-Volt DC Portable 1.NOTE: If unit is fully discharged, it is recommended that the vehicle being used for recharging be left running Power Supply while the unit is being charged via the 12-volt DC method. 2.Insert one end of the DC/DC charging cord into the 12-volt DC cigarette lighter receptacle on the vehicle 1.NOTE: Make sure that the unit ‘s safety ON/OFF switc
Inhaltszusammenfassung zur Seite Nr. 9
10 11 CAUTION: RECHARGEABLE APPLIANCES 8. OPTIONAL VEC023 POWER FORCE 150™ WATT INVERTER FOR Certain rechargeable devices are designed to be recharged by plugging them directly into an AC receptacle. These USE WITH THE INDUSTRIAL SERIES™ 900 JUMPSTART SYSTEM & devices may damage the Power Force 150™. When first using a rechargeable device, monitor its temperature for the initial ten minutes of use to determine whether it emits excessive heat. If excessive heat is detected, it is a good POWER S
Inhaltszusammenfassung zur Seite Nr. 10
12 13 To ensure years of reliable service, the power inverter must be installed and used properly. Please read the Example: If a load is rated at 100 watts, the power source must be able to deliver: installation and operating instructions thoroughly prior to installation and use. Pay particular attention to the 100 ÷ 10 = 10 amperes CAUTION and WARNING statements in this manual. The CAUTION statements advise against certain conditions and practices that may result in damage to the INDUSTRIAL 90
Inhaltszusammenfassung zur Seite Nr. 11
14 15 8.3.5 Placement Of The Power Force 150™ 8.5 TROUBLESHOOTING For best operating results, the inverter should be properly installed (as directed in this manual) in the INDUSTRIAL 900™. The combined unit should only be used in locations that meet the following criteria: 8.5.1 Protective Features of the Power Force 150™ The Power Force 150™ monitors the following potentially hazardous conditions: DRY—Do not allow water or other liquids to come into contact with unit. Low Battery Voltage - Th
Inhaltszusammenfassung zur Seite Nr. 12
17 16 8.5.3 Troubleshooting Guide: TROUBLESHOOTING TIPS POSSIBLE CAUSES RECOMMENDATIONS PROBLEM 1. Inverter not adequately warmed up. Turn inverter switch OFF, then ON again. LACK OF Repeat if necessary. POWER OUTPUT ™ 2. Source battery voltage below 10-volts. Recharge/replace source battery. VECTORPower Force 150 POWER INVERTER 3. Equipment being operated draws too Reduce load to appropriate maximum for the PRODUCT SPECIFICATIONS much power. inverter. 4. Inverter in thermal shutdown. Allow inv
Inhaltszusammenfassung zur Seite Nr. 13
18 19 1 YEAR LIMITED WARRANTY REGISTRATION FORM This Vector Manufacturing, Ltd. product is warranted to the original purchaser only, for one year from the date of purchase, to be free of defects in materials and workmanship. In no event will Vector Manufacturing, Ltd. be responsible for any amount of damages beyond the retail purchase price of the product. All Vector Manufacturing, Ltd. products must be registered within (10) days of purchase. To activate this warranty, mail the completed regis
