Inhaltszusammenfassung zur Seite Nr. 1
SecureStack C2
Redundant Power System
C2RPS-SYS
Installation Guide
Caution: Do not use this product with SecureStack C2 PoE devices. Any SecureStack
C2 device with a “P” suffix in the model number (C2xxxx-xxP) indicates a SecureStack
C2 PoE-compliant device and is not compatible with this power system.
Precaución: El RPS no es compatible con switches SecureStack C2 con PoE. No
intente conectar el cable de corriente del RPS a ningún switch SecureStack C2 que
tenga el sufijo “P” e
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Electrical Hazard: Only qualified personnel should perform installation procedures. Advertencia eléctrica: Solamente personal calificado debe realizar procedimientos de instalacion. Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes Personal vorgenommen werden. Notice EnterasysNetworks reserves the right to make changes in specifications and other information contained in this document and its web site without prior notice. The reader should in all
Inhaltszusammenfassung zur Seite Nr. 4
Regulatory Compliance Information Federal Communications Commission (FCC) Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules.
Inhaltszusammenfassung zur Seite Nr. 5
Electromagnetic Compatibility (EMC) This product complies with the following: 47 CFR Parts 2 and 15, CSA C108.8, 89/336/EEC, EN 55022, EN 61000‐3‐2, EN61000‐3‐3, EN 55024, AS/NZS CISPR 22, VCCI V‐3. Compatibilidad Electromágnetica (EMC) Este producto de Enterasys cumple con lo siguiente: 47 CFR Partes 2 y 15, CSA C108.8, 89/336/EEC, EN 55022, EN55024, EN 61000‐3‐2, EN 61000‐3‐3, AS/NZS CISPR 22, VCCI V‐3. Elektro- magnetische Kompatibilität ( EMC ) Dieses Produkt entspricht den folgenden Ric
Inhaltszusammenfassung zur Seite Nr. 6
Declaration of Conformity Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer’s Name: EnterasysNetworks,Inc. Manufacturer’s Address: 50 Minuteman Road Andover, MA 01810 USA European Representative Address: EnterasysNetworks, Ltd. Nexus House, Newbury Business Park London Road, Newbury Berkshire RG14 2PZ, England Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC EN 55022 EN 61000‐3‐2 EN 61000‐3‐3 EN 55024 EC Directive 73/23/EEC EN 60950 Equipment Type/Envir
Inhaltszusammenfassung zur Seite Nr. 7
Enterasys Networks, Inc. Firmware License Agreement BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“Agreement”) between the end user (“You”) and EnterasysNetworks,Inc. on behalf of itself and its Affiliates (as hereinafter defined) (“Enterasys”) that sets forth Your rights and obligations with respect to the Enterasys software program/firmware installed on the Enterasys product (including any accompanying documentation,
Inhaltszusammenfassung zur Seite Nr. 8
3. APPLICABLE LAW. This Agreement shall be interpreted and governed under the laws and in the state and federal courts of the Commonwealth of Massachusetts without regard to its conflicts of laws provisions. You accept the personal jurisdiction and venue of the Commonwealth of Massachusetts courts. None of the 1980 United Nations Convention on Contracts for the International Sale of Goods, the United Nations Convention on the Limitation Period in the International Sale of Goods, and the Unif
Inhaltszusammenfassung zur Seite Nr. 9
8. AUDIT RIGHTS. You hereby acknowledge that the intellectual property rights associated with the Program are of critical value to Enterasys and, accordingly, You hereby agree tomaintain complete books, records and accounts showing (i) license fees due and paid, and (ii) the use, copying and deployment of the Program. You also grant to Enterasys and its authorized representatives, upon reasonable notice, the right toaudit and examine during Your normal business hours, Your books, records, ac
Inhaltszusammenfassung zur Seite Nr. 10
viii
Inhaltszusammenfassung zur Seite Nr. 11
Contents About this Guide Using This Guide ................................................................................................................................. xi Structure of This Guide ........................................................................................................................ xi Using the SecureStack C2 Manual Set ............................................................................................... xii Conventions Used in This Guide .........
Inhaltszusammenfassung zur Seite Nr. 12
Figures 1-1 SecureStack C2RPS-CHAS8 (front view without PSMs).......................................................1-2 1-2 SecureStack C2RPS-CHAS8 (rear view with eight PSMs)....................................................1-2 1-3 C2RPS-PSM (front view) .......................................................................................................1-3 1-4 C2RPS-PSM (rear view) ........................................................................................................1-3 1
Inhaltszusammenfassung zur Seite Nr. 13
About this Guide This guide provides an overview, installation and troubleshooting instructions, and specifications for the Enterasys SecureStack C2RPS‐SYS redundant power system components: chassis (C2RPS‐CHAS8), power supply module (C2RPS‐PSM), DC power cables (C2RPS‐PSM Cable), and AC power cords. Note: In this document, the following terms are used: • RPS refers to the complete SecureStack C2RPS-SYS redundant power system. • Chassis refers to the C2RPS-CHAS8 chassis. • PSM refers to the C
Inhaltszusammenfassung zur Seite Nr. 14
Using the SecureStack C2 Manual Set Using the SecureStack C2 Manual Set Other manuals have been developed for the SecureStack C2 non‐PoE switch devices that can be connected to the RPS for power redundancy. Caution: The RPS does not support PoE-compliant SecureStack switches. Do not try to connect the power cable from this RPS to any SecureStack switch with a “P” suffix in the model name, such as C2xxxxx-xxP. Otherwise, damage to the device may result. Precaución: El RPS no es compatible con
Inhaltszusammenfassung zur Seite Nr. 15
Conventions Used in This Guide Conventions Used in This Guide The following conventions are used in this guide: Note: Calls the reader’s attention to any item of information that may be of special importance. Caution: Contains information essential to avoid damage to the equipment. Precaución: Contiene información esencial para prevenir dañar el equipo. Achtung: Verweißt auf wichtige Informationen zum Schutz gegen Beschädigungen. Electrical Hazard: Warns against an action that could result in p
Inhaltszusammenfassung zur Seite Nr. 16
Conventions Used in This Guide xiv About this Guide
Inhaltszusammenfassung zur Seite Nr. 17
1 Introduction This chapter provides a functional overview of the Redundant Power System (RPS), which includes the following: For information about... Refer to page... RPS Overview 1-1 C2RPS-CHAS8 Chassis 1-2 C2RPS-PSM Power Supply Module 1-3 RPS Deployment Strategies 1-4 Getting Help 1-5 RPS Overview The RPS provides a simple and economical solution for providing a backup power source for up to eight SecureStack Ethernet switch devices. When a PSM is connected to a switch device, the PSM con
Inhaltszusammenfassung zur Seite Nr. 18
!!"#
!!"#
!!"#
!!"#
!!"#
!!"#
!!"#
!!"#
RPS Overview C2RPS-CHAS8 Cha
Inhaltszusammenfassung zur Seite Nr. 19
RPS Overview C2RPS-PSM Power Supply Module The PSM provides the following: •Hot swap capability. •One 12 Vdc, 150 Watts of maximum‐continuous power output to a connected SecureStack C2 switch device. • Front panel Status LED that indicates if the PSM is operating correctly. Figures 1‐3 and 1‐4 show the front and rear view of the C2RPS‐PSM. Figure 1-3 C2RPS-PSM (front view) 1 Intake cooling fans 3 Captive screws (2) 2 AC power LED Figure 1-4 C2RPS-PSM (rear view)
Inhaltszusammenfassung zur Seite Nr. 20
RPS Deployment Strategies RPS Deployment Strategies The RPS can be deployed in a variety of situations with mission‐critical applications. Forexample: •For use in a voice and data network where switches are connected to IP phones and PCs. Connecting an RPS to the switches can prevent voice network failures caused by switch failures. •For use in traditional data 10/100/1000 Ethernet switches carrying mission‐critical data. These applications would typically use one RPS to support up to eigh
