Bedienungsanleitung Radio Shack 120-0243

Inhaltszusammenfassung zur Seite Nr. 1

PLL Synthesized Weather Radio
(120-0243) Features Faxback Doc. # 18408

Your Radio Shack Weatheradio is designed to receive National Weather
Service broadcasts. These broadcasts provide information about weather
conditions and forecasts 24 hours a day.

Other features include the following:

One-Touch On/Off Weather Button - gives you instant weather information at
the touch of a button.

Seven Ch

Inhaltszusammenfassung zur Seite Nr. 2

PLL Synthesized Weather Radio (120-0243) Power Sources Faxback Doc. # 18410 You can power the radio from a 9-volt battery or a standard AC outlet. USING BATTERY POWER To use battery power, you need a 9-volt battery, such as Radio Shack Cat. No. 23-553 (not supplied). Follow these steps to install the battery. 1. Remove the battery compartment cover by pressing down on the cover and sliding it in the direction of the arrow. 2. Snap the bat

Inhaltszusammenfassung zur Seite Nr. 3

PLL Synthesized Weather Radio (120-0243) Operation Faxback Doc. # 18409 Follow these steps to use the radio. 1. Extend the antenna to its full length. 2. Set VOLUME halfway between MIN and MAX. 3. Press WEATHER to turn on the radio. The power indicator lights. NOTE: If the indicator does not light, replace the battery. 4. Set CHANNEL to the frequency that provides the clearest reception. Then swivel the antenna to the position

Inhaltszusammenfassung zur Seite Nr. 4

PLL Synthesized Weather Radio (120-0243) Care and Maintenance Faxback Doc. # 18941 Your Realistic Weatheradio is an example of superior design and craftsmanship. The following suggestions will help you care for the radio so you can enjoy it for years. Keep the radio dry. If it gets wet, wipe it dry immediately. Some liquids might contain minerals that can corrode the electronic circuits. Use and store the radio only in normal temperature

Inhaltszusammenfassung zur Seite Nr. 5

PLL Synthesized Weather Radio (120-0243) Specifications Faxback Doc. # 7497 Standard Test Conditions Frequency Channels 1:..........................................162.400 MHz 2:..........................................162.425 MHz 3:..........................................162.450 MHz 4:..........................................162.475 MHz 5:.....................................