Bedienungsanleitung La Crosse Technology WS-7090U

Inhaltszusammenfassung zur Seite Nr. 1

Wireless Weather Station



Instruction Manual


Congratulations on purchasing this state-of-the-art Weather Station as an example of fine design and quality piece of engineering. The operation of this product is simple and
straightforward. By reading this instruction manual, users will receive a better understanding of the Weather Station together with the optimum benefit of all its features.

The Weather Station


Hanging Hole




LCD

Display



Holder

Inhaltszusammenfassung zur Seite Nr. 2

Set key 1. Slide open the battery cover of the transmiter as indicated above. 2. Checking the correct polarization, insert the 2 x AAA, IEC LR3, 1.5V batteries into the battery compartment. 3. Replace the cover while ensure the batteries do not spring free from the contacts as this may cause transmission start up problems. 4. Within 2 minutes of step 3, flip open the front cover of the Weather Station from slot at the base of the unit. 5. Carefully lift off the front cover using

Inhaltszusammenfassung zur Seite Nr. 3

Note: The hPa setting feature can be used in area where there may be constant changes in air pressure which do not necessarily reflect the changes in the weather. In such areas for example, the hPa might be set to every 3hPa (millibars meaning that there will be no change of weather icons if the air pressure does not drop or increase by at least 3hPa. For areas where the weather is stagnant, the hPa can be set lower. 1. Temperature in degree Fahrenheit S

Inhaltszusammenfassung zur Seite Nr. 4

Note: After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow sufficient time for the Weather Station to collect air pressure data at a constant altitude and therefore result in an more accurate forecast. Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather Station has been designed for us

Inhaltszusammenfassung zur Seite Nr. 5

Note: When the 433MHz signal is received correctly, do not re-open the battery cover of either the transmitter or Temperature station, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see Resetting below) otherwise transmission problems may occur. The transmission range is around 25 m from the transmitter to the Temperature station (in open space). However, this depends on the surrounding environment and in

Inhaltszusammenfassung zur Seite Nr. 6

• Extreme temperatures, vibration and shock should be avoided as these may cause damage to the unit and give inaccurate forecasts and readings. • When cleaning the display and casing, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casing. • Do not submerge the unit in water. • Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended size. • Do make any repairs to the unit.

Inhaltszusammenfassung zur Seite Nr. 7

This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetech