Inhaltszusammenfassung zur Seite Nr. 1
WS-7049U
Wireless 433 MHz
Weather Station with Forecast
Instruction Manual
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Function Keys 6 Time Setting 6 Features Weather Forecast 7-8 Indoor Temperature and Humidity 9 Outdoor Temperatures 9 Minimum & Maximum Records (Indoor, 9 Outdoor & Resetting) Additional Remote Temperature Sensor 10-11 Units (Set-Up, Viewing & Operation)
Inhaltszusammenfassung zur Seite Nr. 3
INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1). 2. One TX6U remote temperature sensor with mounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. Figure 2 Time LCD Indoor LCD Mounting Forecast LCD Bracket Outdoor LCD Figure 1 ADDITIONAL EQUIPMENT (not included) 1. Two, fresh AA 1.5V batteries for indoor weather station. 2. Two, fresh
Inhaltszusammenfassung zur Seite Nr. 4
QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature sensor 3 to 5 apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the remote temperature sensor first then into the indoor weather station. (All remote temperature sensors must be started before the indoor weather station) 4. DO NOT PRESS ANY BUTTONS FOR 10 MINUTES. In this time the indoor
Inhaltszusammenfassung zur Seite Nr. 5
DETAILED SET-UP GUIDE Battery Installation A. Remote Temperature Sensor 1. Remove the mounting bracket. The bracket snaps on and off easily. 2. Remove the battery cover, by sliding the cover down. 3. Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure they do not spring free). 4. Replace the battery cover by sliding upwards. Be sure battery cover is on securely. B. Indoor Weather Station Battery
Inhaltszusammenfassung zur Seite Nr. 6
Program Mode If 30 seconds are allowed to pass or either the IN or Programming Note: the OUT button is pressed during programming modes, the unit will set the last information entered—the display will stop flashing and return to normal time-date readings A. Function Keys There are four function buttons on the WS-7049U. The two buttons on the front are labeled “MIN/MAX/RESET” and “CH”. The two buttons on the back are labeled “SET” and “+”. B. Time Setting 1. Press and hol
Inhaltszusammenfassung zur Seite Nr. 7
FEATURES OF THE WS-7049U Time Display Indoor Humidity Indoor Temperature Forecast icon Weather Tendency Arrow Outdoor Temperature I. Weather Forecast The weather forecasting feature is estimated to be 75% accurate for the next 12 to 24 hours. The weather forecast is based solely upon the change of air pressure over time. The WS-7049U averages past air-pressure readings to provide an accurate forecast—creating a necessity to disregard all
Inhaltszusammenfassung zur Seite Nr. 8
A. Weather Icons There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny—indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds—indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Clouds with Rain—indicates that the weather is expected to get worse (not that the weather will be rainy). The weather icons change when the unit detects a change in air press
Inhaltszusammenfassung zur Seite Nr. 9
II. Indoor Temperature and Humidity The current indoor relative humidity (viewed below the time) and temperature (viewed below the relative humidity) are displayed in the INDOOR LCD. III. Outdoor Temperature The outdoor temperature is viewed in the OUTDOOR LCD. When there is more than one remote temperature sensor unit in operation, a arrow will appear above the CH 1 2 3 area at the bottom of the LCD. This indicates which remote temperature sensor unit (1, 2 or 3) is currentl
Inhaltszusammenfassung zur Seite Nr. 10
Press and hold the “MIN/MAX/RESET” button for 5 seconds to reset the minimum and maximum recorded temperatures. V. Adding Remote Sensors (optional) The WS-7049U is able to receive signals from 3 different remote temperature sensors. The remote temperature sensor model(s) that you choose will come with their own set of instructions. Follow these instructions for a complete guide to setting up. Following are some brief instructions for the basic set-up of remote temperature sensor unit
Inhaltszusammenfassung zur Seite Nr. 11
B. Viewing and Operating Multiple Remote Sensors To view the temperature of a different remote sensor unit, press and release the “CH” button. An arrow over one of the numbers at the bottom of the LCD will be seen. To view the minimum/maximum temperature: 1. Press and release the “CH” button to select which remote temperature sensor to read data from (indicated by the arrow). 2. Press and release the “MIN/MAX/RESET” button. 3. The maximum recorded temperature will be displ
Inhaltszusammenfassung zur Seite Nr. 12
MOUNTING Note: To achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the remote temperature sensor on a North-facing wall. The sending range is 80ft; obstacles such as walls, concrete, and large metal objects will reduce the range. Also, extreme and sudden changes in temperature will decrease the accuracy of the indoor weather station and changes in elevation will result with inaccurate weather forecasting for the next 12 to 24 ho
Inhaltszusammenfassung zur Seite Nr. 13
B. MOUNTING WITH ADHESIVE TAPE 1. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat. 2. Remove the protective strip from one side of the tape. Adhere the tape to the designated area on the back of the mounting bracket. 3. Remove the protective strip from the other side of the tape. Position the remote temperature sensor in the desired location, ensuring
Inhaltszusammenfassung zur Seite Nr. 14
3. Place the indoor temperature station onto the screw using the hanging hole on the backside. Gently pull the station down to lock the screw into place. TROUBLESHOOTING Problem: The LCD is faint Solution: Replace batteries Problem: No outdoor temperature is displayed. Solution: 1. Remove all batteries, reinsert into remote temperature sensor first, then into the indoor temperature station. 2. Place remote temperature sensor closer to the indoor temperature station. 3. Be sure
Inhaltszusammenfassung zur Seite Nr. 15
MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents. They may mark the displays and casings. • Do not submerge in water. • Immediately remove all low powered batteries to avoid leakage and damage. • Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs.
Inhaltszusammenfassung zur Seite Nr. 16
SPECIFICATIONS Temperature measuring range: Indoor 32°F to 139.8°F with 0.2°F resolution (0°C to 59.9°C with 0.1°C resolution) “OFL” displayed if outside this range Outdoor -21.8°F to 157.2°F with 0.2°F resolution (-29.9°C to 69.9°C resolution) “OFL” displayed if outside this range Indoor relative humidity 19% to 95% with 1% resolution measuring range (“- -” displayed if outside this range Indoor temperature checking Every 10 seconds interval Indoor humidity checking
Inhaltszusammenfassung zur Seite Nr. 17
WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can o
Inhaltszusammenfassung zur Seite Nr. 18
PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH. This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.10
