Inhaltszusammenfassung zur Seite Nr. 1
VM9114
Operating Instructions
CLOSE
PIC WIDE TILT
VM9114
160 Watts
A/V
INPUT
watts peak
40W x 4
160
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
VM9114 CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9114 Mobile Multimedia Receiver for maximum enjoyment. Features................................................................................................................................ 1 Controls and Indicators ..........................
Inhaltszusammenfassung zur Seite Nr. 4
VM9114 iv
Inhaltszusammenfassung zur Seite Nr. 5
VM9114 FEATURES Congratulations on your purchase of the Jensen VM9114 Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9114 installed by a reputable installation shop. DVD • Fast Forward/Reverse - 2X, 4X, 8X and 20X • Slow Motion Forward/Reverse - 1/2, 1/4, 1/6 and 1/8 • Play, Pause, Stop, Next Chapter and Previous Chapter CD / MP3 / WMA • CD-Text Compatible • ID3 Tag Compatible • Directory Search
Inhaltszusammenfassung zur Seite Nr. 6
VM9114 • Rotary Encoder Audio Control WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. WARNING! Never
Inhaltszusammenfassung zur Seite Nr. 7
VM9114 CONTROLS AND INDICATORS 1. CLOSE/OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. PIC/BAND Press to adjust the Brightness and Contrast (see “Image/Display Settings” on page 6). With the monitor closed, press BAND to change between three FM and two AM bands. 3. DISC SLOT 4. WIDE/ | With the monitor closed, press to seek backward. Press and hold to adjust the display aspect of the picture to one of two
Inhaltszusammenfassung zur Seite Nr. 8
VM9114 Press and hold to activate the LOC feature. Repeat to deactivate. 12. RESET Press to reset system settings to factory default (except the password and parental lock setting). 13. A/V Input Attach a compatible A/V device. 1 2 9 4 5 CLOSE PIC WIDE TILT VM9114 160 Watts A/V SRC INPUT 8 12 11 10 3 13 7 6 4
Inhaltszusammenfassung zur Seite Nr. 9
VM9114 USING THE TFT MONITOR Open/Close TFT Monitor Open TFT Monitor Press the OPEN button (1) on the front panel to activate the mechanism that moves the display panel into the viewing position. Close TFT Monitor Press the OPEN button (1) on the front panel to load the display panel back into the compartment. TFT Monitor Auto Open If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically moves to the viewing position. If “TFT Auto Open” is “off” when the unit is turned
Inhaltszusammenfassung zur Seite Nr. 10
VM9114 Aspect Ratio Press and hold the WIDE button (4) on the monitor to adjust the aspect ratio as follows: FULL The entire screen is extended horizontally to the aspect ratio of 16 to 9. The extension ratio is the same at any point. NORMAL The conventional display image has a 4 to 3 ratio of horizontal to vertical, leaving a blank area on the right and left sides of the display. STANDBY Screen becomes black. Touch screen to resume. Image/Display Settings Video Output Modes Table 1 show
Inhaltszusammenfassung zur Seite Nr. 11
VM9114 3. Press the PIC button on the monitor (2) 1-3 times to exit the picture adjustment menu. Parking Brake Inhibit When the pink "Parking" wire is connected to the vehicle Parking Brake circuit, the front TFT monitor will display video when the Parking Brake is engaged. (When the pink wire is grounded via the Parking Brake circuit, video will be displayed.) Monitor Movement Mechanism If an obstruction occurs in the monitor path, the following protective measurements can be executed to
Inhaltszusammenfassung zur Seite Nr. 12
VM9114 OPERATING INSTRUCTIONS Power On / Off Press the /SRC button (10) on the unit to turn the unit on. You can also turn on the unit by pressing the OPEN button (1) and opening the TFT screen. Press and hold the button to power off the unit.The monitor is drawn back into the main compartment. Audible Beep Confirmation An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu. Mute/Line Mute Press the rotary encoder MUTE button (11) on the
Inhaltszusammenfassung zur Seite Nr. 13
VM9114 External Devices External peripheral devices, including a game console, camcorder, navigation unit, iPod, Zune, etc. can be connected to this unit via RCA output using an A/V Media Adapter Cable (not included). EJECT A/ V INPUT 1 Right Audio 2 Left Audio 3 Ground 4 Video 3.5mm A/V Cable (not included) Connect the external device to the A/V Media Adapter Cable and then plug the cable into the A/V INPUT connector (13) on the front of the radio. Select “AUX” or “AUX IN” (when monitor is
Inhaltszusammenfassung zur Seite Nr. 14
VM9114 Touch the EQ button on the left side of the screen to display the audio menu. Use the touch screen +/- buttons to adjust the settings for an audio feature. Table 3: Audio Adjustments Audio Function Adjustable Range EQ User Acoustic Urban Rave Latin Dance Hip Hop Rock BASS -14 to +14 MID -14 to +14 TREBLE -14 to +14 FAD Grid BAL Grid NOTE: The EQ mode will automatically change to “USER” when individual audio functions are adjusted. The Audio menu will automatically exit after a few seco
Inhaltszusammenfassung zur Seite Nr. 15
VM9114 SETUP MENU To access system settings, touch the button on the screen to enter the “SETUP” menu. The “GENERAL” sub-menu appears highlighted in blue. 05:33 AM RADIO SETUP MENU General Language Audio Back Clock Mode 12Hr Rating Clock 04 : 31 AM Hardware Tuner Region USA P.VOL TS Cal Beep On DEMO Accessing Menu Items Touch the sub-menu name to select a sub-menu (Language, Audio, RDS, etc.). The features available for adjustment under the highlighted sub-menu option will appear in the cent
Inhaltszusammenfassung zur Seite Nr. 16
VM9114 General Sub-menu Features Setting Options Function Clock Mode 12Hr Clock displays 12 hour time using AM and PM. 24Hr Clock displays 24 hour time up to 23:59. Clock (HH:MM) Clock appears in the top right corner of the screen dur- ing certain operations. NOTE: The AM/PM indication will change as you continue to adjust the hour past 12. Tuner Region USA • AM Frequency Spacing - 10kHz • AM Frequency Band - 530kHz~1720kHz • FM Frequency Spacing - 200kHz • FM Frequency Band - 87.5MHz~107.9MHz
Inhaltszusammenfassung zur Seite Nr. 17
VM9114 supported by the DVD, then the default language is used. Setting Options Function Language English On Screen Display appears in English. Subtitle English DVD subtitles automatically appear in English when avail- able. Auto DVD subtitles appear according to the default subtitle lan- guage specified on the disc. Off DVD subtitles do not appear. Audio English DVD Audio is heard in English when the option is available. DVD English DVD menu (if applicable) is displayed in English. Menu Audio S
Inhaltszusammenfassung zur Seite Nr. 18
VM9114 To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one. NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc, allowing the appropriat
Inhaltszusammenfassung zur Seite Nr. 19
VM9114 P.VOL Sub-menu Features Setting Options Function Source RADIO Choose a source for which you would like to increase the rel- ative volume (LEVEL). DISC USB1 AUX Level 0-6 Increase relative volume for specified source up to 6 deci- bels. TS Cal (Screen Calibration) To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option. After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, touch and hold the cro
Inhaltszusammenfassung zur Seite Nr. 20
VM9114 TUNER OPERATION Tuner TFT Display 2 8 17 1 4 5 10 9 19 3 01:02 PM FM-1 P1 87.5 MHz RADIO ST LOC E P1 87.5 MHz Q P2 90.1 MHz 14 20 P3 98.1 MHz PS 12 P4 106.1MHz P5 107.9MHz 13 P6 102.9MHz BAND AS MEM PS: 6 7 11 15 16 18 1. Current radio band indicator 2. Radio frequency indicator 3. Clock 4. Stereo broadcasting indicator 5. Strong Local signal broadcasting indicator 6. Preset radio stations: Touch to recall preset stations 7. Information about the current function 8. EQ: Touch for quick ac
