Inhaltszusammenfassung zur Seite Nr. 1
Room Air Conditioners
AUTO
°F °C
AUTO
CONTINUOUS
AUTO
SYSTEM FAN MODE
SCHEDULE FAN SPEED
Standard Chassis Models
115-Volt: SS08M10, SS10M10, SS12M10, SS14M10
208-230-Volt:
SS12M30, SS15M30, SM18M30, SM21M30
SM24M30, SL28M30, SL36M30
115-Volt: YS10M10
208-230-Volt:
ES12M33, ES15M33, YS12M33, EM18M34,
YM18M34, EM24M34, EL36M35, YL24M35
920-198-09 (10-10)
Installation and Operation Manual
Inhaltszusammenfassung zur Seite Nr. 2
THANK YOU! your unit to assure quiet operation, the greatest circulation of cool, dry air, and the most economic operation. Register your air conditioner Model information can be found on the name plate behind the front cover. Please complete and mail the owner registration card furnished with this product, or register online at www.friedrich.com (USA only). For your future convenience, record the model information here. MODEL NUMBER SERIAL NUMBER PURCHASE DATE MODEL NUMBER VOLTS 115 COOLIN
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Safety Precautions ................................................................................................................................................................................................................... 4 Unpacking Instructions............................................................................................................................................................................................................. 5 WARNING: Before Ope
Inhaltszusammenfassung zur Seite Nr. 4
Safety Precautions Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is a safety Alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol with the word “WARNING” or “CAUTION”. These words mean: Indicates a hazard which, if not avoided, can result in severe person
Inhaltszusammenfassung zur Seite Nr. 5
Unpacking Instructions STEP 5. Slide the foam front support forward STEP 1. Cut all 4 packing straps. STEP 6. Carefully lift decorative front box from foam front support STEP 2. Remove wooden shipping bar dividers. STEP 7. Remove decorative front and set safely aside STEP 3. Remove top foam pads. STEP 4. Slowly remove outer box, careful not to loosen decorative front. 5
Inhaltszusammenfassung zur Seite Nr. 6
WARNING: Before Operating Your Unit WARNING NOTICE Electrical Shock Hazard Do not use the LCDI device as an ON/OFF switch. Make sure your electrical receptacle has the same configuration as your air conditioner’s Failure to adhere to this precaution may cause plug. If different, consult a Licensed Electrician. premature equipment malfunction. Do not use plug adapters. Do not use an extension cord. Do not remove ground prong. Once plugged in, the unit will operate normally without the need to res
Inhaltszusammenfassung zur Seite Nr. 7
Standard Filter Cleaning / Installation Instructions STEP 1. STEP 2. NOTE: Figure 2 Figure 4 FILTER FILTER GRIP FRR071 Figure 3 FRR047 STEP 3. Swing the front frame open. Clean the front frame by washing Figure 5 FILTER GRIP A TOP TAB HANDLE FRONT FRR052 FRAME WITH STANDARD MESH FILTER FRR048 STEP 4. NOTE: the tab in the frame stops the handle from sliding in, slide the handle from the other direction. Do not force the handle into the frame. STEP 5. the inside of the front door. 7
Inhaltszusammenfassung zur Seite Nr. 8
Premium Carbon Filter Installation Instructions STEP 1. STEP 4. STEP 2. in Figure 4. NOTE: STEP 3. STEP 5. as shown in Figure 6. and slide the assembly into the unit as per the instructions on the door. NOTE: Make sure the frame with the mesh is facing towards you. NOTE: the tab in the frame stops the handle from sliding in, slide the handle from the other direction. Do not force the handle into the frame. Figure 6 Figure 7 FRONT FRAME WITH MESH FILTER FRR050 FRR051 8
Inhaltszusammenfassung zur Seite Nr. 9
THIS PAGE INTENTIONALLY LEFT BLANK 9
Inhaltszusammenfassung zur Seite Nr. 10
FAN SPEED Button – Used to sequentially select between fan speeds. Control Panel Operation Depending on your model, you can select between LOW, MED, HIGH, Let’s check out how to control your air conditioner. On the control panel, and MAX and AUTO. Max setting not on SL, EL, YL or cool plus models). just to the left of the POWER , is a liquid crystal display (LCD). All of the When the button is pressed, the fan speed is temporarily displayed control panel function buttons and mode ico
Inhaltszusammenfassung zur Seite Nr. 11
CHECK FILTER appears on screen. The word “ ” appears next to the button. The alert is issued when the fan run time is greater than 500 hours. This alert may be reset by the user (Refer to Special Functions, Filter Reset). Maintenance Required – When maintenance is required, a service icon appears on screen. This icon will not be dismissed until maintenance has been performed. If the service icon The hour digits flash first. The user presses the or the icon is on standby the
Inhaltszusammenfassung zur Seite Nr. 12
BACK BACK EXIT EXIT SYSTEM SYSTEM FAN FAN MODE MODE FAN FAN SPEED SPEED DISPLAY DISPLAY SCHEDULE SCHEDULE ENTER ENTER User presses or to toggle the format between 12HR and The menu allows the user to adjust the minimum spread 24HR display. To exit the selection process and accept the between the Auto Cool set point and the Auto Heat set point. change, press the key. Press the or key to adjust. The adjust range is 3 to 10. FRR063 FRR066 Auto Changeover ‘Dead Band’ – A
Inhaltszusammenfassung zur Seite Nr. 13
BACK EXIT SYSTEM FAN F MODE FAN F SPEED DISPLAY Y SCHEDULE ENTER R FRR072 User presses or to select between ATSF On or Off. Press the key to accept the change and exit the selection process. User presses or to select between Freeze Protection On & Freeze Protection Off. Press the key to accept the change and exit the selection process. FRR069 FRR073 Freeze Protection – The Kühl+ models have a special feature that is designed to keep the interior space ab
Inhaltszusammenfassung zur Seite Nr. 14
4. Changing modes on the remote thermostat will not illuminate the Control Panel LCD. Add a Remote Thermostat Remote Thermostat Selection Remote Thermostat – An external thermostat may be added to the air conditioner to provide remote temperature sensing and control. The Friedrich recommends the use of either the RT4 or RT5. The RT4 is a thermostat interface connector is located on the panel behind the front digital display thermostat with single speed fan control. The RT5 features gril
Inhaltszusammenfassung zur Seite Nr. 15
FAN SPEED Button – Used to sequentially select new fan speed, plus Remote Control Operation FAN AUTO operation. When the button is pressed, the fan speed is SPEED Remote Control – Refer to Figures 11 and 12 during operation description. temporarily displayed in the display window, plus a fan speed icon (triangle) changes to indicate the new speed level. Fan speed automatically varies Getting Started – Install two (2) AAA batteries in the battery compartment depending on the set temperatur
Inhaltszusammenfassung zur Seite Nr. 16
Figure 11 DISPLAY SYSTEM FAN MODE POWER TEMPERATURE TEMPERATURE UP DOWN FAN SPEED SCHEDULE FRR005 Figure 12 AUTO COOL HEAT FAN ONLY ICON ICON ICON ICON SYSTEM MODE °F / °C ICONs FAN MODE FAN SPEED SCHEDULE 2 X 16 SEGMENT ICON DISPLAY FRR006 16
Inhaltszusammenfassung zur Seite Nr. 17
Figure 13 Airflow Selection and Adjustment Air flow direction adjustment left or right side of the discharge opening. Each of the banks of louvers can be directed left, right, up or down in order to achieve the most optimum move it in the direction that you would like the air to be directed. Please louvers than the other. Fresh air and exhaust control Your air conditioner has the ability to bring fresh air into the room or exhaust stale air out of the room. The control slide is found on th
Inhaltszusammenfassung zur Seite Nr. 18
1/4 5/16 The following instructions are for standard chassis model groups Installation Instructions sizes listed in Table 3. READ THIS FIRST! Electrical Requirements Table 3 MODEL DESIGNATION CABINET SIZE (H x W x D) WARNING 15 15 SMALL CHASSIS - SS, 15 ⁄16" x 25 ⁄16" x 29" (405 mm x ES, YS 660 mm x 737 mm) Electrical Shock Hazard 15 15 MEDIUM CHASSIS - SM, 17 ⁄16" x 25 ⁄16" x 29" (455 mm x Make sure your electrical receptacle has the EM, YM 660 mm x 737 mm) same configuration as your air con
Inhaltszusammenfassung zur Seite Nr. 19
INSTALLATION HARDWARE AND ACCESSORY DETAIL ITEM 2 ITEM 3 ITEM 1 ITEM 5 ITEM 6 ITEM 4 ITEM 7 ITEM 8 ITEM 9 ITEM 11 ITEM 12 ITEM 13 ITEM 14 ITEM 10 ITEMS NOT TO SCALE FRR009 ITEM DESCRIPTION QTY. ITEM DESCRIPTION QTY. NO NO WINGBOARD MOUNTING PARTS MOUNTING PARTS 8 WINGBOARD (MASONITE) 1 9 "J" TYPE SPEED NUT 4 4 SCREW, SHEET METAL #12A x 2” 7 10 WINGBOARD CLIP (SPRING STEEL) 4 14 CHASSIS SEAL GASKET (LIGHT FOAM) 1 11 SCREW, #8 x ½" PHILLIPS TRUSS HD. 4 WINDOW SEALING 12 SEALING GASKE
Inhaltszusammenfassung zur Seite Nr. 20
Figure 15 Standard Window Installation NOTE: Hardware and accessories used during installation are shown on page 18. Each part will be referred as Item No. STEP 1. Remove the chassis Entrygard retainer by removing the far right screw (See Figure 14), save this screw to reattach the chassis retainer after installation (Step 12). Also, remove and discard the two retainer screws and washers located at the rear of the unit (See Figure 14). CAUTION Handle Use Use handle on both sides to Use H
