Inhaltszusammenfassung zur Seite Nr. 1
ENGLISH
CONTENTS
COMPACT
SAFETY PRECAUTIONS 2 – 5
VHS CAMCORDER
QUICK OPERATION GUIDE 6
MAJOR FEATURES 7
PROVIDED ACCESSORIES 7
GETTING STARTED 8 – 13
GR-AXM237UM
RECORDING 14 – 27
Basic Recording ..........................14
Basic Features ...........................16
Advanced Features ......................18
PLAYBACK 28 – 32
Basic Playback ...........................28
Features ..................................29
Connections...............................30
Using The Cassette Adapter .....
Inhaltszusammenfassung zur Seite Nr. 2
2 EN Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual •All major sections and subsections are listed in the Table Of Contents on the cover. •Notes appear after most subsections. Be sure to read these as well. •Basic and advanced features/operation are separated for easier reference. It is recommended that you . . .
Inhaltszusammenfassung zur Seite Nr. 3
EN3 This camcorder is designed to be used with NTSC-type color television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere. Use the BN-V11U/V12U/V20U battery packs and, to recharge them, the provided multi-voltage AC Power Adapter/Charger. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.) ATTENTION: The produ
Inhaltszusammenfassung zur Seite Nr. 4
4 EN IMPORTANT PRODUCT ANTENNA INSTALLATION INSTRUCTIONS SAFETY INSTRUCTIONS 1. Outdoor Antenna Grounding Electrical energy can perform many useful functions. If an outside antenna or cable system is connected to But improper use can result in potential electrical the product, be sure the antenna or cable system is shock or fire hazards. This product has been grounded so as to provide some protection against engineered and manufactured to assure your voltage surges and built-up static charges. A
Inhaltszusammenfassung zur Seite Nr. 5
EN5 USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a •Do not place this product on an unstable cart, marked change in performance and you are unable stand, tripod, bracket or table. It may fall, causing to restore normal operation by following the detailed serious injury to a child or adult, and serious procedure in its operating instructions, do not damage to the product. attempt to service it yourself as opening or rem
Inhaltszusammenfassung zur Seite Nr. 6
QUICK OPERATION GUIDE 6 EN SUPPLY POWER INSERTING A VIDEO CASSETTE A Hook on. B Push in. PUSH Button EJECT Switch BATTERY RELEASE Using the battery pack 1 Open the LCD monitor fully. Hook its end to the camcorder and push the 2 Slide EJECT to open the cassette holder. battery pack in until it locks in place . 3 Insert a video cassette. (Charging procedure, Z pg. 8) 4 Press PUSH to close the cassette holder. To remove the battery pack (For more details, Z pg. 10) Slide BATTERY RELEASE and pull o
Inhaltszusammenfassung zur Seite Nr. 7
MAJOR FEATURES EN7 Program AE with Special Picture Stabilizer (Z pg. 16) Effects (Z pg. 19) n Electronic Fog Filter n ND Effect n Sepia n Twilight n Sports n Nega/Posi n 1/2000 sec. High Speed Shutter TBC (Time Base Corrector) (Z pg. 29) Digital Hyper Zoom (Z pg. 16) PROVIDED ACCESSORIES •AC Power •Cassette Adapter Adapter/ (VHS Playpak) Charger C-P7U AA-V16U •Shoulder Strap •Battery Pack •Lithium Battery CR2025 BN-V11U (for clock operation) •DC Cord NOTES about Automatic Demonstration Automati
Inhaltszusammenfassung zur Seite Nr. 8
GETTING STARTED 8 EN Battery pack BN-V11U, Power BN-V12U or BN-V20U This camcorder’s 3-way power supply system lets you Marks choose the most appropriate source of power. Do not use provided power supply units with other equipment. To AC outlet CHARGE CHARGING THE BATTERY PACK indicator Make sure you unplug the camcorder’s DC cord from 1 the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet. AC Power Align the marks and slide the battery pack in the Adapter/Ch
Inhaltszusammenfassung zur Seite Nr. 9
EN9 USING THE BATTERY PACK A Hook on. Hook its end to the camcorder and push the battery pack in until it locks in place . B Push in. •If the battery pack is attached in the wrong position, a malfunction may occur. To Detach The Battery Pack . . . .... slide BATTERY RELEASE and pull out the battery pack. Approximate recording time LCD LCD LCD Battery pack monitor off/ monitor on/ monitor on/ Viewfinder on Viewfinder off Viewfinder on BN-V11U 1 hr. 30 min. 1 hr. 20 min. 1 hr. 10 min. BATTERY REL
Inhaltszusammenfassung zur Seite Nr. 10
GETTING STARTED (cont.) 10 EN Slot Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. Switch off the unit’s power and remove the power 1 supply unit (battery pack, AC Power Adapter/Battery Charger, etc.). Pull out the battery holder to remove it from the 2 camcorder. Insert the battery in the holder, and be sure to have Battery holder 3 the “+” mark visible. Slide the holder back into the slot until you hear a 4 click. NOTE
Inhaltszusammenfassung zur Seite Nr. 11
EN11 Date/Time Settings Set the Power Switch to “PRO.”. The power lamp 1 comes on. Press MENU. The Menu Screen appears. 2 Rotate the Select Wheel to move the highlight bar to 3 “NEXT” in Menu Screen 1 and press it to display Select Wheel Menu Screen 2. Then, rotate it to move the highlight bar to “DATE/TIME” and press it. The DATE/TIME Power Switch Menu appears. •To return to the previous settings, rotate the Select MENU Button Wheel to move the highlight bar to “EXIT” and press it, then go to s
Inhaltszusammenfassung zur Seite Nr. 12
GETTING STARTED (cont.) 12 EN Recording Mode Setting Set depending on your preference. Set the Power Switch to “AUTO” or “PRO.”. Press SP/ 1 EP for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “EP” (Extended Play) is more economical, providing three times the recording time. NOTE: Select Wheel If the recording mode is switched during recording, the playback picture will be blurred at the switching point. Power Switch SP/EP R
Inhaltszusammenfassung zur Seite Nr. 13
EN13 Grip Adjustment Power Zoom Lever Separate the Velcro strip. 1 Recording Pass your right hand through the loop and grasp the Start/Stop Button 2 grip. Adjust so that your thumb and fingers can easily 3 operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip. 3 3 Viewfinder Adjustment 2 2 Set the Power Switch to “CAMERA” (“AUTO” or 180 180° ° 1 “PRO.”). Adjust the viewfinder manually for best viewability. 2 1 Turn the Diopter Adjustment Control until the 3 indi
Inhaltszusammenfassung zur Seite Nr. 14
RECORDING Basic Recording 14 EN NOTE: LENS COVER Open/Close Ring You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 8) c Recording Mode Setting (Z pg. 12) c Load A Cassette (Z pg. 10) c Grip Adjustment (Z pg. 13) c Viewfinder Adjustment (Z pg. 13) Shooting While Watching The Viewfinder Power Switch Make sure the LCD monitor is closed and locked. Recording Start/Stop Button 1 Turn the LENS COVER Open/Close Ring to open the lens cover. S
Inhaltszusammenfassung zur Seite Nr. 15
EN15 NOTES: c When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power. c The cassette holder cannot be opened unless a power supply is attached. c There may be a delay after you slide EJECT until the cassette holder opens. Do not use force. c The time required to calculate the remaining tape length, and the accuracy of the calculation, may vary according to the
Inhaltszusammenfassung zur Seite Nr. 16
RECORDING Basic Features 16 EN FEATURE: Zooming Zoom in (T: Telephoto) PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitry extends the maximum magnification offered by optical zoom. This system is called Digital Zoom out (W: Wide angle) Zoom. OPERATION: Zoom In Slide the Power Zoom Lever towards “T”. Display Zoom Out Slide the Power Zoom Lever towards “W”. Zoom indicator bar n The further you slide the Power Zoom Lever, the quicker th
Inhaltszusammenfassung zur Seite Nr. 17
EN17 5 SEC. REC Button FEATURE: Quick Review PURPOSE: To check the end of the last recording. RETAKE OPERATION: (2/3) 1) Set the Power Switch to “CAMERA” (“AUTO” or Button “PRO.”). 2) Press 2 and release quickly during the Record– Standby mode. n Tape is rewound for approx. 2 seconds and played back automatically, then pauses in Record–Standby mode for the next shot. NOTE: Distortion may occur at the start of playback. This is Display normal. FEATURE: Retake PAUSE PURPOSE: To re-record certain s
Inhaltszusammenfassung zur Seite Nr. 18
RECORDING Advanced Features 18 EN Fade/Wipe Effects These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or EFFECT wipe-out works at recording end or when you enter Button Record–Standby mode. Set the Power Switch to “PRO.”. 1 Press EFFECT repeatedly until the desired mode’s 2 name and indication appear. Power Switch They are displayed for approx. 2 seconds, then the 3 name disappears so that only the indication remains. The effect is rese
Inhaltszusammenfassung zur Seite Nr. 19
EN19 Program AE With Special Effects Set the Power Switch to “PRO.”. P.AE 1 Button Press P.AE repeatedly until the desired mode’s name 2 and indication appear. They are displayed for approx. 2 seconds, then the name disappears so that only the indication remains. The mode is activated. To cancel the effect, press P.AE repeatedly until “OFF” Power Switch 3 appears. “OFF” is displayed for approx. 2 seconds. NOTES: c Only one mode can be engaged at a time. c The screen becomes slightly reddish when
Inhaltszusammenfassung zur Seite Nr. 20
RECORDING Advanced Features (cont.) 20 EN Using Menus For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. Set the Power Switch to “PRO.”. 1 Menu access depends on the function you select. 2 If you select the functions from the “Menu Screen Select Wheel MENU Button Available Using The Select Wheel” described on pg. 21 . . . .... press the Select Wheel. The Menu Screen Display appears. (ex. Men
