Inhaltszusammenfassung zur Seite Nr. 1
INSTRUCTIONS
EN SP
MANUAL DE INSTRUCCIONES
HD MEMORY CAMERA
VIDEOCÁMARA DE MEMORIA HD
U
GZ-X900
Dear Customers
Thank you for purchasing this HD
MEMORY CAMERA. Before use,
please read the safety information and
precautions contained in pages 2 and 3
to ensure safe use of this product.
For Future Reference:
Enter the Model No. (located on the
bottom of the HD MEMORY CAMERA)
and Serial No. (located on the battery
pack mount of the HD MEMORY
CAMERA) below.
Model No.
Serial No.
Apreciado cli
Inhaltszusammenfassung zur Seite Nr. 2
Safety Precautions When the equipment is installed in a cabinet or on CAUTION a shelf, make sure that it has sufficient space on all RISK OF ELECTRIC SHOCK DO NOT OPEN sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, Do not block the ventilation holes. DO NOT REMOVE COVER (OR BACK). (If the ventilation holes are blocked by a NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS Remember that this camera is intended for 1. Read these instructions. private consumer use only. 2. Keep these instructions. Any commercial use without proper permission 3. Heed all warnings. is prohibited. (Even if you record an event such 4. Follow all instructions. as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you 5. Do not use this apparatus near water. obtain permission beforehand.) 6. Clean only with dry clot
Inhaltszusammenfassung zur Seite Nr. 4
Easy Start Guide Inserting an SD card Grip Adjustment Prepare an SD card (commercially available). Turn off the camera and insert an SD card. SD card (label) NOTE Fasten the strap when you grip the camera. • When carrying the camera, please be • Q Open the R Insert careful not to drop it. slot cover Compatible SD/SDHC cards (Z p. 17) Charge the battery before recording Turn off the camera and attach the battery pack. Access lamp Power/charge lamp Blinks: Accessing files Blinks: Charging
Inhaltszusammenfassung zur Seite Nr. 5
Date/Time Setting Select the city closest to T the area where you use Open the LCD monitor to the camera Q turn on the camera DISPLAY/< button Select [ON] if daylight LCD monitor U saving time is observed Select [YES] within R 10 seconds Slide your finger up and down on the sensor. Then touch OK. Set the date and time V Touch sensor: Sets the date and time &: Moves the cursor to the right When the message disappears, press the OK: Clock starts • DISPLAY/< button for at least 2 seconds to
Inhaltszusammenfassung zur Seite Nr. 6
Video recording CAUTION Before recording an important scene, it is recommended to conduct a trial recording. Select recording mode (REC) Q The mode changes when you press the button. Recording Mode Indicator Set the recording dial to ! (AUTO) mode R Start recording S Remaining space on the SD card Record-standby Video Quality Press the START/STOP button to start recording, and press it again to stop. Recording EN
Inhaltszusammenfassung zur Seite Nr. 7
Still Image Recording Select recording mode (REC) Q The mode changes when you press the button. Set the recording dial to # (AUTO) mode R Set the focus S Press and hold The ? indicator becomes green SNAPSHOT halfway. when the captured image is focused. Take a still image T Press SNAPSHOT fully to take a still image. EN
Inhaltszusammenfassung zur Seite Nr. 8
Playing back Select playback mode (PLAY) Q The mode changes when you press the button. Select video or still image mode R The mode changes when you press the button. Select a file and touch OK S Index screen Playback screen To perform operations such as forward search or reverse search ( Z p. 23) To view files on TV ( p. 25) Z CAUTION Do not forget to make copies after recording! To copy files onto discs ( Z p. 28) • To dub files to a VCR/DVD recorder (Z p. 30) • To edit files on your
Inhaltszusammenfassung zur Seite Nr. 9
Accessories CR2025 CU-VC10 AP-V21U BN-VF908U Everio Dock AC Adapter Battery Pack Lithium Battery Pre-installed in the remote control. CD-ROM Component Cable • • Hand Strap AV Cable • • USB Cable • NOTE Remote Control • Make sure to use the provided cables for Core Filter (RM-V751U) ( p. 26) connections. Z Do not use any other cables. Everio Dock You can connect cables to the connectors of the Everio dock. The connection is completed when you place the camera on the dock. COMPONENT connect
Inhaltszusammenfassung zur Seite Nr. 10
Contents GETTING STARTED EDITING Index ........................................................12 Managing Files ........................................27 Tripod Mounting ............................................ 13 Capturing a Still Image from a Video ............ 27 Deleting Files ................................................ 27 Indications on LCD Monitor ...................14 Preparing the Remote Control ...................... 15 COPYING Necessary Settings before Use .............16 Ch
Inhaltszusammenfassung zur Seite Nr. 11
How to use the Touch Read This First! Sensor Make a backup of important recorded data It is recommended to copy your important After the menu is displayed on the LCD recorded data to a DVD or other recording monitor: media for storage. JVC will not be responsible for any lost data. Make a trial recording Before the actual recording of important data, make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly. Reset the camera if
Inhaltszusammenfassung zur Seite Nr. 12
GETTING STARTED Index NOTE Be careful not to cover 3, 4, 8 and 9 • during shooting. The LCD monitor can rotate 270°. • 1 EN GETTING STARTED
Inhaltszusammenfassung zur Seite Nr. 13
Camera Remote Control ! PLAY/REC Button (Z p. 18, 19, 23, 24) Q Infrared Beam Transmitting Window # EXPORT Button (Z p. 36) R ZOOM (T/W) Buttons (Zoom in/out) $ UPLOAD Button (Z p. 37) S UP Button % Zoom Lever ( Z p. 20) T SKIP BACKWARD Button Speaker Volume Control ( Z p. 23) U LEFT Button & SNAPSHOT ( #) Button (Z p. 19) V BACK Button ( INFO (=) Button ( Z p. 20) W PLAYLIST Button ) FLASH ( () Button ( Z p. 20) X START/STOP Button * Touch Sensor Y S.SHOT (Snapshot) Button Z INFO Button + OK B
Inhaltszusammenfassung zur Seite Nr. 14
Indications on LCD Monitor During both Video and Still Image During Video Recording Only Recording DEC. 24. 2009 4:55 PM ! Mode Indicator # High Speed Recording Indicator ( Z p. 22) ! Selected Recording Mode Indicator $ Export Mode Indicator ( Z p. 36) ( Z p. 21) % Counter : Auto Mode @ & Upload Mode Indicator ( Z p. 37) 3: Manual Mode ( Video Quality # White Balance Indicator ) Remaining Time ( Z p. 18) $ Macro Mode Indicator * REC: (Appears during recording.) M % Zoom Indicator (Z p. 20)
Inhaltszusammenfassung zur Seite Nr. 15
During Video Playback During Still Image Playback 8 DEC. 24. 2009 4:55 PM DEC. 24. 2009 4:55 PM ! Mode Indicator ! Mode Indicator # High Speed Recording Indicator # Quick Review Indicator (Z p. 19) $ Playlist Playback Indicator $ Folder/File Number (Appears when playing back a playlist.) % Slide Show Playback Indicator % Quick Review Indicator ( Z p. 18) & Recording Medium Indicator & Video Quality ( Battery Indicator ( Counter ) Date/Time ( Z p. 16) ) Playback Mode * Output with 1080p Playback
Inhaltszusammenfassung zur Seite Nr. 16
Necessary Settings before Use 4 Select [CLOCK ADJUST]. Charging the Battery Pack Attach the battery pack.( Z p. 4) You can also connect the AC adapter using • the Everio dock connector. ( Z p. 9) The power/charge lamp blinks to indicate • charging has started. When the lamp goes out, charging is • 5 Select [CLOCK SETTING]. finished. Unplug the AC adapter from the AC outlet • and disconnect the AC adapter from the camera. To check the remaining battery power See page 20. 6 Select the c
Inhaltszusammenfassung zur Seite Nr. 17
Setting the clock to local time when Using an SD Card traveling Operations are confirmed on the SD cards • After performing steps 1-4 ( Z p. 16) from the following manufacturers. - Panasonic 5 Select [AREA SETTING]. - TOSHIBA - SanDisk - ATP Video recording: Class 4 or higher compatible SDHC card (4 GB to 32 GB) For UXP mode, use Class 6 or higher. • 6 Select the city closest to the area you Still image recording: are traveling. SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB
Inhaltszusammenfassung zur Seite Nr. 18
RECORDING/PLAYBACK Recording Files Video Recording Press PLAY/REC to select the Set the recording dial to ! mode. recording mode. Q R The lens cover opens automatically. Press START/STOP to start recording. S Approximate remaining time for recording You can also start/stop recording by selecting [REC] on the LCD monitor. (On-screen recording control) To stop recording To change the video quality Press START/STOP again. Change the settings in [VIDEO QUALITY]. To view the last recorded s
Inhaltszusammenfassung zur Seite Nr. 19
Still Image Recording Press PLAY/REC to select the Set the recording dial to # mode. recording mode. Q R The lens cover opens automatically. Press and hold SNAPSHOT halfway. S The ? indicator becomes green when the captured image is focused. Press SNAPSHOT fully to take a still image. T To view the last recorded image Select after shooting. A Selecting ; during playback deletes that image. To change the image quality Change the settings in [IMAGE QUALITY]. To change the image size Cha
Inhaltszusammenfassung zur Seite Nr. 20
Recording Files (Continued) When Scene Select ( Z p. 22) is selected, Zooming the flash is automatically set to auto and fires automatically according to the Preparation: Scene Select setting Select the recording mode. • Recommended shooting distance Select ! or # mode. • Within 2 m (6.6 ft). Zoom out Zoom in NOTE The flash does not work during CONTINUOUS SHOOTING and BRACKETING. W: Wide angle T: Telephoto Checking the Remaining Battery You can also zoom out/zoom in by selecting Powe
