Inhaltszusammenfassung zur Seite Nr. 1
2-591-678-11 (1)
Digital Video Camera Recorder Getting Started
8
Recording/
20
Playback
Operating Guide
Using the Menu
36
Dubbing/Editing
63
D C R - P C 1 0 0 0
Using a Computer
73
Troubleshooting
86
Additional Information
106
http://www.sony.net/
Printed on 100% recycled paper using
VOC (Volatile Organic Compound)-free
vegetable oil based ink.
© 2005 Sony Corporation
Printed in Japan
DCR-PC1000 2-591-678-11(1) DCR-PC1000 2-591-678-11(1)
Inhaltszusammenfassung zur Seite Nr. 2
Read this first Before operating the unit, please read this Lithium-Ion batteries are recyclable. You can help preserve manual thoroughly, and retain it for future our environment by returning reference. your used rechargeable batteries to the collection and recycling location nearest you. WARNING For more information regarding recycling of rechargeable batteries, call toll free 1-800-822- To prevent fire or shock hazard, 8837, or visit http://www.rbrc.org/ do not expose the unit to rain
Inhaltszusammenfassung zur Seite Nr. 3
The supplied interface cable must be used with Note the equipment in order to comply with the limits DCR-PC1000 is to be used with the Handycam for a digital device pursuant to Subpart B of Part Station Model DCRA-C140 and AC Power 15 of FCC Rules. Adaptor Model AC-L200. Owner’s Record Notes on use The model and serial numbers are located on the Your camcorder is supplied with two bottom. Record the serial number in the space provided below. Refer to these numbers whenever kinds of oper
Inhaltszusammenfassung zur Seite Nr. 4
Read this first (Continued) • Disconnect the AC Adaptor from the • Television programs, films, video tapes, Handycam Station holding both the and other materials may be copyrighted. camcorder and the DC plug. Unauthorized recording of such materials • Be sure to slide the POWER switch may be contrary to the copyright laws. up to OFF (CHG) when you insert the camcorder into the Handycam Station or On this manual remove the camcorder from it. • The images of the LCD screen and the viewfinder use
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents Getting Started Step 1: Checking supplied items ...............................................................8 Step 2: Charging the battery pack .............................................................9 Step 3: Turning the power on and holding your camcorder firmly ...........13 Step 4: Adjusting the LCD panel and viewfinder .....................................14 Step 5: Using the touch panel .................................................................15 Changing th
Inhaltszusammenfassung zur Seite Nr. 6
Indicators displayed during recording/playback .......................................28 Searching for the starting point ...............................................................31 Searching for the last scene of the most recent recording (END SEARCH) .............................................................................................................31 Searching manually (EDIT SEARCH) .............................................................31 Reviewing the most recently r
Inhaltszusammenfassung zur Seite Nr. 7
Deleting recorded pictures from the “Memory Stick Duo” ........................69 Marking images on the “Memory Stick Duo” with specific information (Image protection/Print mark) ........................................................69 Printing recorded images (PictBridge compliant printer) .........................70 Jacks to connect external devices ...........................................................72 Using a computer Before referring to the “First Step Guide” on your computer .....
Inhaltszusammenfassung zur Seite Nr. 8
Step 1: Checking supplied items Make sure that you have following items A/V connecting cable (1) (p. 34, 63) supplied with your camcorder. The number in the parentheses indicates the number of that item supplied. USB cable (1) (p. 73, 84) “Memory Stick Duo” 16MB (1) (p. 18, 108) Shoulder Strap (1) Memory Stick Duo adaptor (1) (p. 109) Rechargeable battery pack NP-FA50 (1) (p. 9, 110) CD-ROM “Picture Package Ver.1.7” (1) AC Adaptor (1) (p. 9) (p. 73) Operating Guide (This manual) (1) Power cord
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started Step 2: Charging the battery pack You can charge the “InfoLITHIUM” battery pack (A series) (p. 110) after 2 Insert the battery pack to the end attaching it to your camcorder. with the mark facing outwards. POWER switch DC IN jack DC plug 3 Close the battery cover. To the wall outlet AC Adaptor Power cord 1 Slide the battery cover in the direction of the arrow . Be sure to close the cover completely. Continued 9 DCR-PC1000 2-591-678-11(1)
Inhaltszusammenfassung zur Seite Nr. 10
Step2:Charging the battery pack (Continued) 4 Slide the POWER switch up to 7 Insert the camcorder into the (CHG) OFF. (The default setting.) Handycam Station securely. Be sure to insert the camcorder to the end. 5 Connect the AC Adaptor to the /CHG DC IN jack on the Handycam (charge) lamp Station. Be sure that the mark on the DC plug is facing up. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. • When inse
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started To charge the battery pack using the To remove the battery pack AC Adaptor Slide the POWER switch up to (CHG)OFF. Then open the battery cover to remove the Slide the POWER switch up to (CHG)OFF. battery pack. Then connect the AC Adaptor directly to the DC IN jack on the camcorder. POWER switch DC IN jack When storing the battery pack DC plug Fully discharge the battery before storing it Facing the mark for an extended period (p. 110). to the LCD screen. To the wall outle
Inhaltszusammenfassung zur Seite Nr. 12
Step2:Charging the battery pack (Continued) On the battery pack Charging time • Before changing the battery pack, slide the Approximate time (min.) required when POWER switch up to (CHG) OFF. you fully charge a fully discharged battery • The CHG (charge) lamp flashes during pack. charging, or the battery information (p. 26) will not be correctly displayed under the following Battery pack Charging time conditions. NP-FA50 (supplied) 125 – The battery pack is not attached correctly. NP-FA70 1
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started Step 3: Turning the power on and holding your camcorder firmly To record or play back, slide the POWER switch repeatedly to turn on the respective 2 Hold the camcorder correctly. lamp. When using it for the first time, the [CLOCK SET] screen appears (p. 16). POWER switch 3 Ensure a good grip, then fasten the Strap Belt. 1 Slide the POWER switch repeatedly in the direction of the arrow to turn on the respective lamp. The lens cover opens automatically when the POWER switc
Inhaltszusammenfassung zur Seite Nr. 14
Step 4: Adjusting the LCD panel and viewfinder To turn off the LCD backlight to make The LCD panel the battery last longer Open the LCD panel 90 degrees to the Press and hold DISPLAY BATT INFO for camcorder (), then rotate it to the best a few seconds until appears. angle to record or play (). This setting is practical when you use your camcorder in bright conditions or where you want to save battery power. The recorded picture will not be affected by the setting. To turn on the LCD
Inhaltszusammenfassung zur Seite Nr. 15
Getting Started Step 5: Using the touch panel You can play back recorded pictures (p. Checking the screen indicators 23), or change the settings (p. 36) using the (Display guide) touch panel. You can easily check the meaning of each indicator that appears on the LCD screen. Place your hand on the rear side of the LCD panel to support it. Then, 1 Touch . touch the buttons displayed on the screen. Touch [MENU] during Easy Handycam operation (p. 20). Touch the button on the LCD screen. 6 0
Inhaltszusammenfassung zur Seite Nr. 16
Step 6: Setting the date and time Set the date and time when using this camcorder for the first time. If you do not 3 Select [CLOCK SET] with / , set the date and time, the [CLOCK SET] then touch . screen appears every time you turn on your C L O C K S E T – : – – : – – camcorder or change the POWER switch position. D A T E • If you do not use your camcorder for about 2 0 0 5 Y J A N M 1 D 1 2 : 0 0 A M 3 months, the built-in rechargeable battery gets discharged and the date and time sett
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started Step 7: Inserting a tape or a “Memory Stick Duo” Cassette tape 2 Insert a cassette with its window You can use mini DV cassettes only facing outwards, then press . (p. 107). • The recordable time varies depending on [ Push the center REC MODE] (p. 54). of the back of the cassette lightly Window 1 Slide and hold the OPEN/ EJECT lever in the direction of the arrow and open the lid. OPEN/EJECT lever The cassette compartment automatically slides back in. Do not force the
Inhaltszusammenfassung zur Seite Nr. 18
Step 7: Inserting a tape or a “Memory Stick Duo” (Continued) “Memory Stick Duo” You can use only a “Memory Stick Duo” marked with or (p. 108). • The number and time of recordable pictures varies depending on the image quality or the image size. For details, see page 45. Insert the “Memory Stick Duo” into the “Memory Stick Duo” slot in the right direction until it clicks. Access lamp • If you force the “Memory Stick Duo” into the slot in the wrong direction, the “Memory Stick Duo,” th
Inhaltszusammenfassung zur Seite Nr. 19
Getting Started Step 8: Selecting the aspect ratio (16:9 or 4:3) of the recording picture By recording in the 16:9 (wide) mode, Recording a moving picture or still you can enjoy wide-angle, high-quality image on the “Memory Stick Duo” pictures. Set the POWER switch to CAMERA- • If you intend to view pictures on a wide TV, recording in the 16:9 (wide) mode is MEMORY. recommended. The aspect ratio of the picture switches to 4:3. Press WIDE SELECT to select the desired screen aspect rat
Inhaltszusammenfassung zur Seite Nr. 20
Recording/Playback with ease (Easy Handycam) With this Easy Handycam operation, most of the E camera settings are automatically adjusted optimally, which frees you from detailed adjustment. D Since only basic functions become available and screen font size increases for easy viewing, even first A time users can enjoy easy operation. Go through the procedures described in steps 1 to 8 C (p. 8 to 19) before operation. B Recording with ease 1 Slide the POWER switch in the direction of the a
