Inhaltszusammenfassung zur Seite Nr. 1
3-251-853-11(1)
FM/AM
Compact Disc
Player
US
Operating Instructions
FR
Mode d’emploi
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. CDX-MP40 Serial No.
For installation and connections, see the supplied installation/connections manual.
En ce qui con
Inhaltszusammenfassung zur Seite Nr. 2
Warning Welcome ! This equipment has been tested and found to Thank you for purchasing this Sony Compact comply with the limits for a Class B digital Disc Player. You can enjoy its various features device, pursuant to Part 15 of the FCC Rules. even more with: These limits are designed to provide reasonable MP3 file playback. protection against harmful interference in a CD-R/CD-RW which can have a session added residential installation. This equipment can be played (page 7). generates, use
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Location of controls . . . . . . . . . . . . . . . . . . . 4 Radio Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Storing stations automatically Notes on discs . . . . . . . . . . . . . . . . . . . . . . . . 6 — Best Tuning Memory (BTM) . . . . . . 15 About MP3 files . . . . . . . . . . . . . . . . . . . . . . 7 Receiving the stored stations . . . . . . . . . . . 15 Storing only the desired stations. . . . . . . . . 16 Getting Started Storing station names R
Inhaltszusammenfassung zur Seite Nr. 4
N L E P ATT S P D MODE O Location of controls Refer to the pages listed for details. DSO EQ3 SEEK BTM DISC REP SHUF ALBUM SENS 1 2 3 4 5 6 LIST CDX-MP40 a SOURCE (Power on/Radio/CD/MD) m Number buttons 20 button Radio: Selecting the source. Storing the desired station on each number b SEL (select) button button. Selecting items. CD/MD: c Volume +/– button (1): DISC – 11 d Display window (2): DISC + 11 e SEEK +/– button (3): REP 12 Radio: (4): SHUF 13 Tuning in stations automatically/find
Inhaltszusammenfassung zur Seite Nr. 5
Selecting a disc and album with the card remote commander Card remote commander RM-X115 Disc and album can be skipped using the DISC/ ALBUM (+/–) buttons on the card remote commander. DSPL MODE (With this unit) To Press Skip albums* + or – [once for each album] + – Album selection To continuously skip PRESET albums, press and hold either button. SOURCE SEEK– SEEK+ PRESET (With optional unit) – To Press OFF ATT + Skip discs + or – [once for each disc] VOL – Disc selection To continuously skip
Inhaltszusammenfassung zur Seite Nr. 6
Precautions Notes on discs If your car has been parked in direct sunlight, To keep the disc clean, do not touch the surface. allow the unit to cool off before operating it. Handle the disc by its edge. Power antenna will extend automatically while Keep your discs in their cases or disc the unit is operating. magazines when not in use. While driving, do not use the CUSTOM FILE Do not subject the discs to heat/high feature or any other functions which may divert temperature. Avoid lea
Inhaltszusammenfassung zur Seite Nr. 7
Before playing, clean the discs with a commercially available cleaning cloth. Wipe About MP3 files each disc from the center out. Do not use solvents such as benzine, thinner, commercially MP3 (MPEG 1 Audio Layer-3) is a standard available cleaners, or antistatic spray intended technology and format for compressing a sound for analog discs. sequence. The file is compressed to about 1/10 of its original size. Sounds outside the range of human hearing are compressed while the sounds we
Inhaltszusammenfassung zur Seite Nr. 8
Notes The playback order of the MP3 files With formats other than ISO 9660 level 1 and level 2, The playback order of the folders and files is as folder names or file names may not be displayed follows: correctly. When naming, be sure to add the file extension “.MP3” to the file name. Folder (album) If you put the extension “.MP3” to a file other than 1 MP3, the unit cannot recognize the file properly and will generate random noise that could damage your 1 MP3 file (track) speakers.
Inhaltszusammenfassung zur Seite Nr. 9
Detaching the front panel Getting Started You can detach the front panel of this unit to protect the unit from being stolen. Resetting the unit Caution alarm If you turn the ignition switch to the OFF Before operating the unit for the first time, or position without removing the front panel, the after replacing the car battery or changing the caution alarm will beep for a few seconds. connections, you must reset the unit. If you connect an optional amplifier and do not Remove the front pan
Inhaltszusammenfassung zur Seite Nr. 10
Attaching the front panel Place hole A of the front panel onto the spindle Setting the clock B on the unit, then lightly push the left side in. Press (SOURCE) on the unit (or insert a CD) to The clock uses a 12-hour digital indication. operate the unit. Example: To set the clock to 10:08 1 Press (DSPL) for 2 seconds. The hour indication flashes. A B 1Press the volume +/– button to set the hour. 2Press (SEL). The minute indication flashes. 3Press the volume +/– button to set the minute. 2 Pre
Inhaltszusammenfassung zur Seite Nr. 11
Notes Before playing a track, this unit reads all track and album information on the disc. Depending on the CD Player track structure, it may take more than a minute before playback begins. During this time, “READ” is CD/MD Unit (optional) displayed. Please wait for play to start automatically when the reading is complete. Depending on the condition of the disc, it may not In addition to playing a CD with this unit, you play back (page 6, 7). can also control external CD/MD units.
Inhaltszusammenfassung zur Seite Nr. 12
Display items Playing tracks repeatedly — Repeat Play When the disc/album/track changes, any 1 prerecorded title* of the new disc/album/track is You can select: automatically displayed (if the Auto Scroll REP-TRACK — to repeat the current track. 1 function is set to “ON,” names exceeding 8 REP-ALBM* — to repeat the tracks in the characters will be scrolled (page 20)) current album. 2 REP-DISC* — to repeat the tracks in the current disc. Source *1 Available only when an MP3 file is
Inhaltszusammenfassung zur Seite Nr. 13
Inhaltszusammenfassung zur Seite Nr. 14
Viewing the Disc Memo As a display item, the Disc Memo always takes Locating a disc by name priority over any original CD TEXT information. — List-up (For a CD unit with the CD TEXT/ CUSTOM FILE function, or an MD unit) To Press View (DSPL) during CD/CD You can use this function for discs that have been 1 TEXT disc playback assigned custom names* or for CD TEXT 2 discs* . Tip *1 Locating a disc by its custom name: when you Other items can be displayed (page 12). assign a name for a CD (page
Inhaltszusammenfassung zur Seite Nr. 15
Receiving the stored stations Radio 1 Press (SOURCE) repeatedly to select The unit can store up to 6 stations per band the radio. (FM1, FM2, FM3, AM1, and AM2). 2 Press (MODE) repeatedly to select the Caution band. When tuning in stations while driving, use Best 3 Press the number button ((1) to (6)) Tuning Memory to prevent accidents. on which the desired station is stored. If preset tuning does not work Storing stations — Automatic tuning/Local Seek Mode automatically Automatic tuning: —
Inhaltszusammenfassung zur Seite Nr. 16
If FM stereo reception is poor — Monaural Mode Storing station names During radio reception, press (SENS) — Station Memo (BTM) repeatedly until “MONO-ON” You can assign a name to each radio station and appears. store it in memory. The name of the station “MONO” indicator is displayed. currently tuned in appears in the display. You can assign a name using up to 8 characters for a station. Storing the station names The sound improves, but becomes monaural 1 Tune in a station whose name you
Inhaltszusammenfassung zur Seite Nr. 17
Erasing the station name Tuning in a station through 1 Press (SOURCE) repeatedly to select a list the radio. 2 Press (MODE) repeatedly to select the — List-up band. 1 During radio reception, press (LIST) 3 Press (LIST) for 2 seconds. momentarily. 4 Press (DSPL) for 2 seconds. The frequency or the name assigned to the The stored names will appear. current station appears in the display. 5 Press the volume +/– button repeatedly to select the disc name you want to erase. 6 Press (SEL) for 2 s
Inhaltszusammenfassung zur Seite Nr. 18
Inhaltszusammenfassung zur Seite Nr. 19
Inhaltszusammenfassung zur Seite Nr. 20
Changing the sound and Setting the equalizer (EQ3) display settings You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW — Menu AGE, ROCK, CUSTOM, and OFF (equalizer OFF)). The following items can be set: You can store a different equalizer setting for each source. SET (Set Up) 1 A.SCRL (Auto Scroll)* (page 12). Selecting the equalizer curve M.DSPL (Motion Display) — to select the Motion Display mode from “1,” “2,” and 1 Press (SOURCE) to select a source
