Inhaltszusammenfassung zur Seite Nr. 1
3-859-373-12(1)
CD Radio
Cassette-Corder
Operating Instructions
CFD-ZW150
CFD-ZW160
CFD-ZW200
1996 by Sony Corporation
CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6
Inhaltszusammenfassung zur Seite Nr. 2
Information Warning For customers in the United States To prevent fire or shock hazard, do This equipment has been tested and found to not expose the player to rain or comply with the limits for a Class B digital moisture. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordan
Inhaltszusammenfassung zur Seite Nr. 3
Basic Operations Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player Setting Up 12 Using the display 20 Hooking up the system 13 Locating a specific track 23 Adjusting the audio emphasis (MEGA BASS/4 BAND 14 Playing tracks repeatedly GRAPHIC EQUALIZER/ (Repeat Play) SURROUND) 15 Creating your own program (Program Play) Additional Information 25 Precautions The Timer 27 Troubleshooting 16 Setting the clock 29 Maintenance
Inhaltszusammenfassung zur Seite Nr. 4
Basic Operations Playing a CD 3 1,2 For hookup instructions, see pages 20 – 22. 1 Push PUSH OPEN down to open the CD compartment and place the CD on the CD compartment. With the label side up 2 Close the lid of the CD compartment. 3 Press ^ (direct power-on). Display The player plays all the tracks once. Track number Playing time 4 Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6
Inhaltszusammenfassung zur Seite Nr. 5
Basic Operations Use these buttons for additional operations POWER PUSH OPEN VOLUME +/– ^ p AMS/SEARCH =/+ Tip To Press Next time you want to Adjust the volume VOLUME +/– listen to a CD, just press ^. The player turns on Stop playback p automatically and starts playing the CD. Pause playback ^ Press again to resume play after pause. Go to the next track AMS/SEARCH+ Go back to the previous track AMS/SEARCH= Remove the CD PUSH OPEN Turn on/off the player POWER Basic Operations 5 CFD-ZW150/.ZW160/Z
Inhaltszusammenfassung zur Seite Nr. 6
Listening to the radio 1 23 For hookup instructions, see pages 20 – 22. Display 1 Press RADIO (direct power-on). 2 Turn BAND to select the band you want. 3 Turn TUNING to tune in the station you want. 6 Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6
Inhaltszusammenfassung zur Seite Nr. 7
Basic Operations Use these buttons for additional operations POWER VOLUME +/– Tips To Press • If the FM broadcast is Adjust the volume VOLUME +/– noisy, set FM MODE/ ISS at the rear to Turn on/off the radio POWER “MONO”. Radio will play in monaural. • Next time you want to To improve broadcast reception listen to the radio, just Reorient the antenna for FM. Reorient the player itself press the RADIO for AM. button. The player turns on automatically and starts playing the previous station. for F
Inhaltszusammenfassung zur Seite Nr. 8
Playing a tape 3 12 3 2 For hookup instructions, see pages 20 – 22. 1 Press TAPE (direct power-on). 2 Press p6 to open tape compartment and insert a recorded tape. Close the compartment. With the side you want to play facing forward 3 Press (. The player starts playing. 8 Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6
Inhaltszusammenfassung zur Seite Nr. 9
Basic Operations Use these buttons for additional operations POWER VOLUME +/– 0/) p6 P 0/) p6 P Note To Press or slide During playback, do not Adjust the volume VOLUME +/– press buttons on the other deck. Otherwise Stop playback p6 the playback speed may change. Fast-forward or rewind the tape ) or 0 Pause playback P Tip Press the button again to For the best results, use resume play after pause. TYPE I (normal) tape. Play the opposite side of the DIR in the direction of tape the arrow. The Ó or
Inhaltszusammenfassung zur Seite Nr. 10
Recording on a tape 31 For hookup instructions, see pages 20 – 22. 1 Press p6 to open the tape compartment on deck B and insert a blank tape. With the side you want to record on facing forward 2 Select the program source you want to record. Display To record from the CD player, insert a CD (see page 4) and press CD. To record from the radio, press RADIO and tune in the station you want using TUNING (see page 6.) To record from a tape, press TAPE, insert a recorded tape into deck A and press P a
Inhaltszusammenfassung zur Seite Nr. 11
Basic Operations Deck B 3 Start recording. To record, press r on deck B (( is depressed automatically). For high speed dubbing, after depressing HI-SPEED DUBBING, press r on deck B (( is depressed automatically). (CFD- ZW200 only). Note Use these buttons for additional operations When recording a CD, press r after the total POWER p6 P track number and the total playing number of the CD have been displayed. Tips • Adjusting the volume or the audio emphasis (see page 23) will not affect the recor
Inhaltszusammenfassung zur Seite Nr. 12
The CD Player Using the display DISPLAY/ ENTER You can check information about the CD using the display. Checking the total track numbers and playing time Press DISPLAY/ENTER in stop mode. Total track number Total playing time Checking the remaining time Press DISPLAY/ENTER while playing a CD. To display Press DISPLAY/ENTER Remaining time on the CD Once and the number of tracks left The current track number Twice and playing time 12 The CD Player CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6
Inhaltszusammenfassung zur Seite Nr. 13
The CD Player Locating a specific track You can quickly locate any track using the number buttons (CFD-ZW160/ ZW200 only). You can also find a specific Number buttons point in a track while playing a CD. 0 / ) (CFD-ZW160/ZW200) Note To locate Press (CFD-ZW160/ZW200 a specific track directly number button of the only) (CFD-ZW160/ZW200 only) track. You cannot locate a specific track if “SHUF a point while listening to ) (forward) or 0 REP” or “PGM” is lit in the sound (backward) while playing the
Inhaltszusammenfassung zur Seite Nr. 14
Playing tracks CD PLAY MODE^=/+ repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 15). 1 Press CD. “Cd” appears in the display. 2 Press PLAY MODE until the repeat mode you want appears in the display. To repeat Select a single track REP 1 all the tracks REP ALL tracks in random order SHUF REP programed tracks PGM REP and then progam tracks (see step 3 on page 15). 3 Do either of the following to start repeat play: • When you’ve selected RE
Inhaltszusammenfassung zur Seite Nr. 15
The CD Player Creating your CD PLAY MODE^ =/+ own program (Program Play) You can make a program of up to 20 tracks in the order you want them to be played. Tips 1 Press CD. • When using the remote (CFD-ZW160/ZW200 “Cd” appears in the display. only), you can select 2 Press PLAY MODE until “PGM” appears in the the track by pressing display. the number buttons instead of AMS/ 3 Press AMS/SEARCH =or + then press SEARCH =/+ DISPLAY/ENTER for the tracks you want to and DISPLAY/ENTER. program in the or
Inhaltszusammenfassung zur Seite Nr. 16
The Timer Setting the clock CLOCK DISPLAY/ TIME SET +/– ENTER Before you set the clock, insert three size AA (R6) batteries and connect the AC power cord (see page 20 and 21.) As long as the clock goes, “:” flashes. Tip 1 Press and hold CLOCK for about 2 seconds until The time display “AM” or “PM” and the hour digit flash. system of this player is the 12-hour system: 2 Press TIME SET +/– until you set the current hour. AM12:00 = midnight Then press DISPLAY/ENTER. PM12:00 = noon The minute digit
Inhaltszusammenfassung zur Seite Nr. 17
The Timer Waking up to STANDBY TIMER DISPLAY/ TIME SET+/– music ENTER You can wake up to music at a preset time. Make sure you have set the clock (“Setting the clock” on page 16). 1 Prepare the music source you want to play. To play Do this the radio Tune in a station a CD Insert a CD. 2 Press TIMER for about 2 seconds. The t (clock) and the music source (“Cd” or “RAdIO”) flash. 3 Select the music source (“Cd” or “RAdIO”) by pressing TIME SET +/–, then DISPLAY/ENTER. 4 Set the timer to the hou
Inhaltszusammenfassung zur Seite Nr. 18
Waking up to music (continued) Tips 6 Press STANDBY. • The display window dims while the waking The t indication appears in the display and the up timer is on. power goes off. • You can have the At the preset time, the power will go on and music player go on the next will play for 2 hours. day at the same time. Just press STANDBY until the t indication appears in the display. To check/change when the playback will start The preset settings Press TIMER for about 2 seconds, then DISPLAY/ remain un
Inhaltszusammenfassung zur Seite Nr. 19
The Timer Falling asleep to SLEEP music You can set the player to turn off automatically after about 2 hours, allowing you to fall asleep while listening to music. Tip 1 Play the music source you want. • The display window dims while the sleep 2 Press SLEEP. timer is on. “SLEEP” appears in the display. The player shuts • When you are playing off automatically after about 2 hours. radio or CD, make sure that ( of the tape player is not depressed. To cancel the sleep function • You can fall aslee
Inhaltszusammenfassung zur Seite Nr. 20
Setting Up Hooking up the Speaker terminals 2 system Speaker cords Make sure you turn off the power before making any connections. Right speaker 1 Battery 5 compartment Left speaker 3 To a wall outlet 1 Inserting the back-up batteries Insert three size AA (R6) batteries (not supplied) into the battery compartment. These batteries work to save the memory data. Tips 2 Hooking up the speakers • To detach the speakers, unlock speaker (see B on the diagram) and 1 Align the grooves and slide the speak
