Inhaltszusammenfassung zur Seite Nr. 1
MODEL W1754
20" PLANER WITH
MOBILE BASE
OWNER'S MANUAL
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz
COPYRIGHT © APRIL, 2007 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#9093BL Printed in China
Inhaltszusammenfassung zur Seite Nr. 2
����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ����������������������������������������������������������������������� ��������������������������������������������������������������� � �������� �����������������������������������������������������
Inhaltszusammenfassung zur Seite Nr. 3
INTRODUCTION SAFETY ELECTRICAL SET UP OPERATIONS MAINTENANCE SERVICE PARTS Contents INTRODUCTION ...................................... 2 MAINTENANCE ......................................23 Woodstock Technical Support .................. 2 General ...........................................23 Machine Specifications .......................... 3 Cleaning ..........................................23 Maintenance Schedule ..........................23 SAFETY ...........................................
Inhaltszusammenfassung zur Seite Nr. 4
W1754 20" Planer With Mobile Base INTRODUCTION Woodstock Technical Support ® Your new SHOP FOX 20" Planer With Mobile Base has been specially designed to provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and
Inhaltszusammenfassung zur Seite Nr. 5
INTRODUCTION W1754 20" Planer With Mobile Base � � � � � � �� � � � � � � � � � � � � � � � � �� �� � �� � � � � �� � � �� � � � �� �� � � � � � �� � � � �� � � � � � � � �� � � � � � � � � � � � � � � � �� � � � � � � �� �� � � � �� � � � � � � �� � � � � � � � ������ ����� ���� ������� ����� ������� ���� ����� ����� ��������������������������������������������������������������� ����� ���������������� �������������� ��������� ���������� � �������������������������������������������������������
Inhaltszusammenfassung zur Seite Nr. 6
W1754 20" Planer With Mobile Base Controls and Features B L C A D G E M G K F G J H N I Figure 1. W1754 controls and features. A. Control Box and Panel B. Return Rollers C. Table Height Handwheel D. Gearbox E. Speed Control Knob F. Table Height Scale G. Table Locks H. Lifting Bar I. Front Access Panel J. Foot Pedal K. Extension Wing L. Dust Hood M. V-belt cover N. Motor and Magnetic Switch Access Panel -4- INTRODUCTION
Inhaltszusammenfassung zur Seite Nr. 7
SAFETY W1754 20" Planer With Mobile Base SAFETY READ MANUAL BEFORE OPERATING MACHINE. FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL RESULT IN PERSONAL INJURY. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. This symbol is use
Inhaltszusammenfassung zur Seite Nr. 8
W1754 20" Planer With Mobile Base 10. NEVER LEAVE WHEN MACHINE IS RUNNING. Turn power off and allow all moving parts to come to a complete stop before leaving machine unattended. 11. DO NOT USE IN DANGEROUS ENVIRONMENTS. DO NOT use machinery in damp, wet locations, or where any flammable or noxious fumes may exist. 12. KEEP WORK AREA CLEAN AND WELL LIT. Clutter and dark shadows may cause accidents. 13. USE A GROUNDED EXTENSION CORD RATED FOR THE MACHINE AMPERAGE. Undersized cords over- heat a
Inhaltszusammenfassung zur Seite Nr. 9
SAFETY W1754 20" Planer With Mobile Base Additional Safety Instructions for Planers READ and understand this USE this and other machinery with caution entire instruction manual and respect. Always consider safety first, before using this machine. as it applies to your individual working Serious personal injury conditions. No list of safety guidelines can may occur if safety and be complete—every shop environment is operational information is different. Failure to follow guidelines cou
Inhaltszusammenfassung zur Seite Nr. 10
W1754 20" Planer With Mobile Base ELECTRICAL 220V Operation The Model W1754 is wired for 220V single-phase opera- tion. This machine must be hardwired to a locking shutoff switch by a qualified electrician. Since hardwiring involves a permanent installation with conduit runs, this task can only be safely accomplished by a qualified electrician. As always, observe all applicable electrical codes when con- necting this machine to power. Figure 2. Locking shutoff switch. This machine must be g
Inhaltszusammenfassung zur Seite Nr. 11
SET UP W1754 20" Planer With Mobile Base SETUP If any parts are missing, examine the pack- Unpacking aging for the missing parts. For any missing parts, find the part number in the back ® The SHOP FOX Model W1754 has been carefully pack- of this manual and contact Woodstock aged for safe transporting. If you notice the machine has International, Inc. at (360) 734-3482 or at been damaged, please contact your authorized SHOP tech-support@shopfox.biz ® FOX dealer immediately. Items Needed for
Inhaltszusammenfassung zur Seite Nr. 12
W1754 20" Planer With Mobile Base Hardware and Tools (Not Shown) • Hex Wrenches 3, 4, 5, 6mm .............................4 • Wrenches 8/10, 12/14, 17/19mm ......................3 • Set Screws M8-1.25 x 20 (Wings) ........................6 • Hex Bolts M8-1.25 x 35 (Wings) .........................6 • Flat Washers 8mm (Wings) ...............................6 • Lock Washers 6mm (Wings) ..............................6 • Handwheel Bushing (Handwheel) .......................1 • Handwheel Handle (Ha
Inhaltszusammenfassung zur Seite Nr. 13
SET UP W1754 20" Planer With Mobile Base Cleaning Machine The table and other unpainted parts of your planer are coated with a waxy grease that protects them from corro- sion during shipment. Clean this grease off with a solvent cleaner or citrus-based degreaser. DO NOT use chlorine- based solvents such as brake parts cleaner or acetone—if you happen to splash some onto a painted surface, you will ruin the finish. These items are coated and must be cleaned: NEVER use gasoline or other petrol
Inhaltszusammenfassung zur Seite Nr. 14
W1754 20" Planer With Mobile Base Extension Wings Hex Bolts Extension wings are heavy and could cause per- sonal injury if dropped during installation. Have an assistant hold the table while you fasten it to the planer. To attach the table extension wings, do these steps: 1. Install the M8-1.25 x 20 set screws in the holes in Set Screws the bottom of the wings (Figure 5). 2. With the help of an assistant, attach the table Figure 5. Extension wing fasteners and extension wings to the planer
Inhaltszusammenfassung zur Seite Nr. 15
SET UP W1754 20" Planer With Mobile Base Handwheel, Dust Hood & Caster To install the handwheel, do these steps: 1. Place the bushing on the handwheel shaft. 2. Insert the 4 x 4 x 20 key into the shaft keyway. Main Power Switch 3. Thread the handle into the handwheel. 4. Place the handwheel on the shaft and secure it with the M12-1.75 hex nut and flat washer, as shown in Figure 7. Figure 7. Installing handwheel on shaft. During the next step, you MUST connect your planer to a dust collecti
Inhaltszusammenfassung zur Seite Nr. 16
W1754 20" Planer With Mobile Base 4. Mount the foot pedal onto the caster and insert the pin between the two parts. Pin Foot Pedal 5. Lock the caster and pedal in place with the E-clip and washers, as shown in Figure 9.� Gearbox Oil Level Before starting your machine for the first time, make sure the gearbox has oil. The proper oil level is just even Hex Bolt with the bottom of the fill plug hole. The gearbox uses Bracket Caster 80W-90W automotive grade gear oil. Figure 9. Foot pedal and ca
Inhaltszusammenfassung zur Seite Nr. 17
SET UP W1754 20" Planer With Mobile Base Test Run Complete this test run process once you have familiarized yourself with all instructions in this manual and taken all safety precautions. The purpose of the test run is to make sure that the motor and EMERGENCY STOP button work properly before proceeding. To perform a test run, do these steps: 1. Read the entire manual, and make sure the gearbox oil level is full (Refer to the Lubrication section on Page 25). 2. Make sure all tools and for
Inhaltszusammenfassung zur Seite Nr. 18
W1754 20" Planer With Mobile Base Recommended Adjustments For your convenience, the adjustments listed below have been performed at the factory and no further setup is required to operate your machine. However, because of the many variables involved with shipping and storage, some of these adjustments may Loose hair and clothing could get need to be repeated to ensure optimum cutting results. caught in machinery and cause serious Keep this in mind as you start to use your new planer. per
Inhaltszusammenfassung zur Seite Nr. 19
OPERATIONS W1754 20" Planer With Mobile Base OPERATIONS General The Model W1754 will perform many types of operations that are beyond the scope of this manual. Many of these operations can be dangerous or deadly if performed incor- rectly. The instructions in this section are written with the under- standing that the operator has the necessary knowledge and skills to operate this machine. If at any time you are experiencing difficulties performing any operation, stop using the machine! READ
Inhaltszusammenfassung zur Seite Nr. 20
W1754 20" Planer With Mobile Base 6. Measure your workpiece thickness and adjust the table height as necessary to take a lighter or heavier pass, depending on your needs. For most wood 1 types, /16" per pass is a good cutting depth. Note: Any time you switch directions with the handwheel, there will be a small amount of back- lash—so the first crank of the handwheel after 1 switching directions will be slightly less than /16". However, as long as you move the handwheel in the same direct
